Short answer: the FBT ProMaxX 110A. Both are rated 4.1/5 for sound quality (#6 and #5 of 28 10-inch pa speakers), and the FBT ProMaxX 110A costs $629 against $749 for the LD Systems Stinger 10-A-G3, with sound quality a draw, the lower price decides it.
What the FBT ProMaxX 110A does well: Manufacturer measurements give it a 5.82 preference score with an ideal subwoofer, close to the LD Systems Stinger 10 A G3’s 5.89, at a lower price. Watch for: Bass rolls off early, at 90Hz for -3dB and about 68Hz for -10dB, so it needs a subwoofer for dance music or full-band use.
What the LD Systems Stinger 10-A-G3 does well: Medium-quality vendor data returns a 5.89 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box. Watch for: Its 127dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.
Buy the FBT ProMaxX 110A. Both are rated the same for sound quality, and it costs $120 less than the LD Systems Stinger 10-A-G3.
Looking for alternatives? See the complete PA & Live Sound rankings.
Specifications Side By Side
| FBT ProMaxX 110A | LD Systems Stinger 10-A-G3 | |
|---|---|---|
| Price | $629 | $749.00 |
| Ranked | #6 of 28 in 10-Inch PA Speakers | #5 of 28 in 10-Inch PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10” woofer (2” voice coil), 1” B&C compression driver (1.4” voice coil) | 10” woofer, 1” compression driver |
| Frequency Response | 58Hz - 20kHz (-6dB, manufacturer specified) | 65Hz - 20kHz (manufacturer specified) |
| Dimensions | 21.7”H x 12.6”W x 10.8”D (550 x 320 x 275 mm) | 20.7”H x 12.8”W x 12.1”D (527 x 325 x 308 mm) |
| Amplifier Power | 900W RMS (700W LF + 200W HF); 1,800W peak | 600W peak / 300W RMS |
| Cabinet Material | Polypropylene | 12mm plywood with polyurea coating |
| Maximum SPL | 131dB peak / 124dB continuous | 127dB peak (manufacturer specified) |
| Coverage | 90° x 60° | 90° x 50° |
| DSP | Yes, 6 presets plus 2 user slots | Yes |
| Bluetooth | No | No |
| Weight | 22.7 lbs (10.3 kg) | 28 lbs (12.7 kg) |
| XLR Input | Yes | Yes |
| RCA Input | Yes | No |
| TRS Input | Yes | Yes |
| Optical Input | No | No |
| Coaxial Input | No | No |
| USB Input | No | No |
| HDMI Input | No | No |
| AES Input | No | No |
| Aux Input | No | No |
| Microphone Input | No | Yes |
| Guitar Input | No | No |
| Bass Extension (-3dB) | 90Hz (measured, vendor Spinorama data) | 56Hz (measured, vendor Spinorama data) |
| Bass Extension (-10dB) | about 68.2Hz (measured, vendor Spinorama data) | - |
| Spinorama Preference Score | 2.90 | 3.57 |
| Spinorama Preference Score with Perfect Sub | 5.82 | 5.89 |
| Inputs | - | 2 x XLR/TRS line/mic inputs; XLR mono mix output |
| Rigging | - | M10 suspension points; 36mm Dual-Tilt pole mount |
Related Speaker Comparisons
More worthwhile head-to-heads for LD Systems Stinger 10-A-G3:
- LD Systems DDQ10 vs LD Systems Stinger 10-A-G3
- HK Audio LINEAR 7 110 XA vs LD Systems Stinger 10-A-G3
- HK Audio LINEAR 9 110 XA vs LD Systems Stinger 10-A-G3
- LD Systems Stinger 10-A-G3 vs Turbosound NuQ102
- LD Systems Stinger 10-A-G3 vs dBTechnologies Opera Reevo 210
Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
FBT ProMaxX 110A: $629 Thomann eBay
Pros: Manufacturer measurements give it a 5.82 preference score with an ideal subwoofer, close to the LD Systems Stinger 10 A G3’s 5.89, at a lower price. A 2.2dB reference band keeps the midrange and treble tonally even, and the B&C compression driver on a 90° x 60° horn covers a typical audience area. It is light at 10.3kg for a 10-inch box, with 900W of built-in amplification, a 131dB peak rating and a DSP screen with six presets. Measured bass extension of 90Hz (-3dB).
Cons: Bass rolls off early, at 90Hz for -3dB and about 68Hz for -10dB, so it needs a subwoofer for dance music or full-band use. Off-axis sound is uneven, with a 5.74 directivity-index deviation, so listeners away from the center hear a different balance. The standalone preference score is only 2.90.
Full FBT ProMaxX 110A review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 900W RMS (700W LF + 200W HF); 1,800W peak |
| Aux Input | No |
| Bass Extension (-10dB) | about 68.2Hz (measured, vendor Spinorama data) |
| Bass Extension (-3dB) | 90Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polypropylene |
| Coaxial Input | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| DSP | Yes, 6 presets plus 2 user slots |
| Dimensions | 21.7”H x 12.6”W x 10.8”D (550 x 320 x 275 mm) |
| Drivers | 10” woofer (2” voice coil), 1” B&C compression driver (1.4” voice coil) |
| Frequency Response | 58Hz - 20kHz (-6dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Maximum SPL | 131dB peak / 124dB continuous |
| Microphone Input | No |
| Optical Input | No |
| RCA Input | Yes |
| Spinorama Preference Score | 2.90 |
| Spinorama Preference Score with Perfect Sub | 5.82 |
| TRS Input | Yes |
| USB Input | No |
| Weight | 22.7 lbs (10.3 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
LD Systems Stinger 10-A-G3: $749.00 Amazon B&H Photo Video eBay
Pros: Medium-quality vendor data returns a 5.89 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box. At 12.7kg it is one of the lightest active speakers in this ranking. Measured bass extension of 56Hz (-3dB).
Cons: Its 127dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.
Full LD Systems Stinger 10-A-G3 review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 600W peak / 300W RMS |
| Aux Input | No |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm plywood with polyurea coating |
| Coaxial Input | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 50° |
| DSP | Yes |
| Dimensions | 20.7”H x 12.8”W x 12.1”D (527 x 325 x 308 mm) |
| Drivers | 10” woofer, 1” compression driver |
| Frequency Response | 65Hz - 20kHz (manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Inputs | 2 x XLR/TRS line/mic inputs; XLR mono mix output |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Microphone Input | Yes |
| Optical Input | No |
| RCA Input | No |
| Rigging | M10 suspension points; 36mm Dual-Tilt pole mount |
| Spinorama Preference Score | 3.57 |
| Spinorama Preference Score with Perfect Sub | 5.89 |
| TRS Input | Yes |
| USB Input | No |
| Weight | 28 lbs (12.7 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons