Short answer: choose between the Turbosound NuQ102 and Yamaha DXR10mkIII for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the Turbosound NuQ102. Low-quality vendor data still shows a 5.0 ideal-subwoofer preference score with 63Hz measured extension. The coaxial point-source design gives symmetric 100° x 60° coverage, and being passive keeps amplification and DSP choices flexible for installers.
The case for the Yamaha DXR10mkIII. The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.
Important trade-offs. Being passive, it needs an external amplifier and crossover to work at all, and its 124dB peak claim trails every active speaker in this ranking. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed.
Buy the Turbosound NuQ102 when its stated format, coverage, and system features fit the job better.
Buy the Yamaha DXR10mkIII when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| Turbosound NuQ102 | Yamaha DXR10mkIII | |
|---|---|---|
| Price | $530.00 | $899.99 |
| Ranked | #6 of 19 in 10-Inch Two-Way Powered PA Speakers | #8 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Passive 2-way coaxial PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" coaxial woofer, compression driver | 10" woofer, 1" throat/1.75" diaphragm compression driver |
| Frequency Response | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) | 53Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) | 19.8"H x 12.2"W x 12.2"D (502 x 310 x 310 mm) |
| Inputs | Two Neutrik speakON NL4 connectors | 2 x XLR/TRS combo; XLR thru and DSP outputs |
| Power Handling | 300W continuous / 1,200W peak (IEC, manufacturer specified) | - |
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
| Cabinet Material | 12mm birch plywood | PP plastic |
| Rigging | Eight M10, three M8 and four M6 fly points | 3 x M8 points plus U-bracket points; 35mm dual-angle pole mount |
| Coverage | 100° x 60° | 90° x 60° |
| Maximum SPL | 124dB peak (manufacturer specified) | 132dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) | 61.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No | Bluetooth 5.0 audio streaming and D-Remote control |
| Weight | 28 lbs / 12.7 kg | 32 lbs / 14.5 kg |
| Crossover Frequency | - | 1800Hz (FIR-X) |
| DSP | - | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
Related Speaker Comparisons
Other pairings from the same speaker class worth checking:
- LD Systems DDQ10 vs LD Systems Stinger 10-A-G3
- Yamaha DXR10mkII vs Vue Audiotechnik A-10
- HK Audio LINEAR 7 110 XA vs LD Systems Stinger 10-A-G3
- LD Systems Stinger 10-A-G3 vs Turbosound NuQ102
- Yamaha DXR10mkIII vs Yamaha DXR10mkII
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Turbosound NuQ102: $530.00 B&H Photo Video eBay
Pros: Low-quality vendor data still shows a 5.0 ideal-subwoofer preference score with 63Hz measured extension. The coaxial point-source design gives symmetric 100° x 60° coverage, and being passive keeps amplification and DSP choices flexible for installers.
Cons: Being passive, it needs an external amplifier and crossover to work at all, and its 124dB peak claim trails every active speaker in this ranking.
Full Turbosound NuQ102 review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 300W continuous / 1,200W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm birch plywood |
| Configuration | Passive 2-way coaxial PA speaker |
| Coverage | 100° x 60° |
| Dimensions | 20.7"H x 12.5"W x 10.2"D (525 x 318 x 258 mm) |
| Drivers | 10" coaxial woofer, compression driver |
| Frequency Response | 55Hz - 18kHz (±3dB, manufacturer specified); 50Hz - 20kHz (-10dB) |
| Inputs | Two Neutrik speakON NL4 connectors |
| Maximum SPL | 124dB peak (manufacturer specified) |
| Power Handling | 300W continuous / 1,200W peak (IEC, manufacturer specified) |
| Rigging | Eight M10, three M8 and four M6 fly points |
| Weight | 28 lbs / 12.7 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DXR10mkIII: $899.99 Amazon B&H Photo Video Guitar Center eBay
Pros: The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.
Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed.
Full Yamaha DXR10mkIII review and specifications →
| Amplifier Power | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
|---|---|
| Bass Extension (-3dB) | 61.5Hz (measured, vendor Spinorama data) |
| Bluetooth | Bluetooth 5.0 audio streaming and D-Remote control |
| Cabinet Material | PP plastic |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 1800Hz (FIR-X) |
| DSP | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
| Dimensions | 19.8"H x 12.2"W x 12.2"D (502 x 310 x 310 mm) |
| Drivers | 10" woofer, 1" throat/1.75" diaphragm compression driver |
| Frequency Response | 53Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | 2 x XLR/TRS combo; XLR thru and DSP outputs |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 3 x M8 points plus U-bracket points; 35mm dual-angle pole mount |
| Weight | 32 lbs / 14.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons