Monolith Encore T6 Specifications and Review

Last updated: August 14, 2026

The Monolith Encore T6 ranks #38 out of 54 total Large Size Floorstanding Speakers for sound quality. See Top Recommended Speakers By Attribute for all the top speaker suggestions.

#38 Monolith Encore T6: $800/pair Amazon Monoprice

Pros: Three 6.5-inch pulp-cone drivers provide more displacement and cleaner cinema output than the B6, with good compression behavior at normal levels. Erin found the revised waveguided tweeter’s horizontal radiation consistent enough for predictable EQ, while the gloss-capped, heavily braced 49lb cabinet feels far above its price. The tower can produce useful midbass impact when crossed to a subwoofer.

Cons: Despite its size, Erin measured F3 around 68Hz, so the tower does not eliminate the need for a subwoofer. The native response needs equalization: crossover-region unevenness and excess top-octave energy prevent a fully neutral presentation. The four-ohm load and low-frequency phase angle warrant a robust amplifier, and the tall multi-driver array creates a narrower vertical listening window than a compact two-way.

How it compares: Just above it: SVS Ultra Evolution Pinnacle - $4200 more, 0.3Hz higher bass extension (-3dB). Just below it: Monolith THX-365T - $100 more, 0.8Hz higher bass extension (-3dB).

Bass Extension (-3dB)~68Hz (measured, Erin's Audio Corner)
Dimensions40H x 7.9W x 13.8D inches
DriversThree 6.5-inch pulp woofers; 25mm waveguided silk dome
Impedance4 ohms nominal
Sensitivity87.8dB/2.83V/1m (manufacturer)
Weight49.2lb each

As an eBay Partner, we may be compensated if you make a purchase.