Bowers & Wilkins 803 D4 Review: Rated 3.5/5

Last updated: October 21, 2026

The Bowers & Wilkins 803 D4 is rated 3.5/5 for sound quality, #181 of 228 Large Size Floorstanding Speakers on an estimated rating, since it has not been measured or compared side by side yet. See all Passive Home rankings for every top pick.

Prices on this page were last checked November 18, 2026 at 8:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Brand: Bowers & Wilkins

#181 Bowers & Wilkins 803 D4: $25,000 per pair Bowers & Wilkins $25,000 eBay

Newer model: the Bowers & Wilkins 803 D5, ranked higher, estimated 3.6/5, released Jul 2026.

Older model: the Bowers & Wilkins 803 D3 (ranked lower, estimated 3.4/5). See every Bowers & Wilkins 800 Series generation.

Same family: the Bowers & Wilkins 805 D4 (bookshelf, estimated 3.2/5), the Bowers & Wilkins 804 D4 (smaller floorstanding, ranked lower, estimated 3.4/5), the Bowers & Wilkins 802 D4 (larger floorstanding, ranked higher, estimated 3.6/5), the Bowers & Wilkins 801 D4 (larger floorstanding, ranked higher, estimated 3.7/5) and the Bowers & Wilkins HTM81 D4 (center, rated 3.3/5).

Pros: A high-end tower with a turbine head midrange and twin 7 inch woofers for very deep bass. Incorporates the iconic all-aluminum Turbine Head dedicated midrange enclosure, isolating the 5-inch Continuum driver from cabinet resonances. Dual 7-inch Aerofoil drivers achieve true sub-20Hz in-room extension (19Hz -3dB).

Cons: Pronounced treble elevation imparts a distinctly bright character that can fatigue ears on hot recordings. Heavy 137-lb cabinet and 3.0-ohm minimum impedance require high-current amplification.

Is the Bowers & Wilkins 803 D4 right for you?

Buy it if

  • you have a modest amplifier (90 dB sensitivity is easy to drive).
  • you want deep bass without a subwoofer (-3 dB at 19 Hz).

Skip it if

ReleasedAug 2021 (5 years ago)
Bass Extension (-3dB)19Hz (manufacturer specified)
DIY KitNo
Dimensions45.9”H x 14.1”W x 20.1”D (1165 x 357 x 511 mm)
Drivers1” (25mm) Diamond dome tweeter, 5” (130mm) Continuum cone FST midrange in Turbine Head, 2 x 7” (180mm) Aerofoil bass units
Frequency Response19Hz - 28kHz (+/- 3dB, manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight137 lbs (62.15 kg) each
Woofer Cabinetported, down-firing Flowport

Head-to-Head Comparisons

3 comparisons

More Bowers & Wilkins speakers →