Bowers & Wilkins 802 D4 Review: Rated 3.6/5

Last updated: October 21, 2026

The Bowers & Wilkins 802 D4 is rated 3.6/5 for sound quality, #171 of 228 Large Size Floorstanding Speakers on an estimated rating, since it has not been measured or compared side by side yet. See all Passive Home rankings for every top pick.

Prices on this page were last checked November 18, 2026 at 8:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Brand: Bowers & Wilkins

#171 Bowers & Wilkins 802 D4: $30,000 per pair Bowers & Wilkins $30,000 eBay

Newer model: the Bowers & Wilkins 802 D5, ranked higher, estimated 3.7/5, released Jun 2026.

Older models: the Bowers & Wilkins Nautilus 802 (ranked higher, rated 4/5) and the Bowers & Wilkins 802 Diamond (ranked higher, estimated 3.8/5). See every Bowers & Wilkins 800 Series generation.

Same family: the Bowers & Wilkins 805 D4 (bookshelf, estimated 3.2/5), the Bowers & Wilkins 804 D4 (smaller floorstanding, ranked lower, estimated 3.4/5), the Bowers & Wilkins 803 D4 (smaller floorstanding, ranked lower, estimated 3.5/5), the Bowers & Wilkins 801 D4 (larger floorstanding, ranked higher, estimated 3.7/5) and the Bowers & Wilkins HTM81 D4 (center, rated 3.3/5).

Pros: A high-end tower with a turbine head midrange and twin 8 inch woofers for very deep bass and big dynamic scale. Larger 6-inch Turbine Head midrange and dual 8-inch Aerofoil woofers yield effortless dynamic scale and authoritative low-frequency reach to 17Hz. Benchmark industrial craftsmanship and acoustic isolation.

Cons: Non-flat frequency voicing with energetic top-end presence departs from neutral studio target curves. Enormous 194-lb weight and 3.0-ohm impedance dips require uncompromised amplification and spacious room placement.

Is the Bowers & Wilkins 802 D4 right for you?

Buy it if

  • you have a modest amplifier (90 dB sensitivity is easy to drive).
  • you want deep bass without a subwoofer (-3 dB at 17 Hz).

Skip it if

ReleasedAug 2021 (5 years ago)
Bass Extension (-3dB)17Hz (manufacturer specified)
DIY KitNo
Dimensions48”H x 16.3”W x 23.7”D (1218 x 413 x 602 mm)
Drivers1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange in Turbine Head, 2 x 8” (200mm) Aerofoil bass units
Frequency Response17Hz - 28kHz (+/- 3dB, manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight194.2 lbs (88.1 kg) each
Woofer Cabinetported, down-firing Flowport

Head-to-Head Comparisons

4 comparisons

More Bowers & Wilkins speakers →