Short answer: the Bowers & Wilkins 802 D4. It ranks #171 of 226 floorstanding speakers by sound quality, rated 3.6/5, at $30,000. The Bowers & Wilkins 803 D4 ranks #180, rated 3.5/5, at $25,000, $5,000 cheaper, a saving that is not big enough to make up the sound-quality gap.
Why pick the Bowers & Wilkins 802 D4: Larger 6-inch Turbine Head midrange and dual 8-inch Aerofoil woofers yield effortless dynamic scale and authoritative low-frequency reach to 17Hz. Watch for: Non-flat frequency voicing with energetic top-end presence departs from neutral studio target curves.
The case for the Bowers & Wilkins 803 D4: Incorporates the iconic all-aluminum Turbine Head dedicated midrange enclosure, isolating the 5-inch Continuum driver from cabinet resonances. The catch: Pronounced treble elevation imparts a distinctly bright character that can fatigue ears on hot recordings.
Buy the Bowers & Wilkins 802 D4. It is rated higher for sound quality, and the $5,000 saving on the Bowers & Wilkins 803 D4 is not enough to make up the difference.
About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Bowers & Wilkins 802 D4 3.4 to 3.8; Bowers & Wilkins 803 D4 3.3 to 3.7). Treat this verdict as provisional.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Bowers & Wilkins 802 D4 | Bowers & Wilkins 803 D4 | |
|---|---|---|
| Price | $30,000 per pair | $25,000 per pair |
| Ranked | #171 of 226 in Large Size Floorstanding Speakers Estimated | #180 of 226 in Large Size Floorstanding Speakers Estimated |
| Drivers | 1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange in Turbine Head, 2 x 8” (200mm) Aerofoil bass units | 1” (25mm) Diamond dome tweeter, 5” (130mm) Continuum cone FST midrange in Turbine Head, 2 x 7” (180mm) Aerofoil bass units |
| Frequency Response | 17Hz - 28kHz (+/- 3dB, manufacturer specified) | 19Hz - 28kHz (+/- 3dB, manufacturer specified) |
| Sensitivity | 90dB (2.83V/1m, manufacturer specified) | 90dB (2.83V/1m, manufacturer specified) |
| Impedance | 8 ohms nominal, 3.0 ohms minimum (manufacturer specified) | 8 ohms nominal, 3.0 ohms minimum (manufacturer specified) |
| Bass Extension (-3dB) | 17Hz (manufacturer specified) | 19Hz (manufacturer specified) |
| Dimensions | 48”H x 16.3”W x 23.7”D (1218 x 413 x 602 mm) | 45.9”H x 14.1”W x 20.1”D (1165 x 357 x 511 mm) |
| Weight | 194.2 lbs (88.1 kg) each | 137 lbs (62.15 kg) each |
| Woofer Cabinet | ported, down-firing Flowport | ported, down-firing Flowport |
| DIY Kit | No | No |
Related Speaker Comparisons
How Bowers & Wilkins 802 D4 compares with other leading options:
- Bowers & Wilkins 801 D4 vs Bowers & Wilkins 802 D4
- Bowers & Wilkins 803 D5 vs Bowers & Wilkins 802 D4
- Bowers & Wilkins 802 D4 vs Bowers & Wilkins 804 D5
- Bowers & Wilkins 803 D5 vs Bowers & Wilkins 803 D4
- Bowers & Wilkins 804 D5 vs Bowers & Wilkins 803 D4
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Bowers & Wilkins 802 D4: $30,000 per pair Estimated Bowers & Wilkins eBay
Newer model: the Bowers & Wilkins 802 D5, ranked higher, estimated 3.7/5, released Jun 2026.
Older models: the Bowers & Wilkins Nautilus 802 (ranked higher, rated 4/5) and the Bowers & Wilkins 802 Diamond (ranked higher, estimated 3.8/5). See every Bowers & Wilkins 800 Series generation.
Same family: the Bowers & Wilkins 805 D4 (bookshelf, estimated 3.2/5), the Bowers & Wilkins 804 D4 (smaller floorstanding, ranked lower, estimated 3.4/5), the Bowers & Wilkins 803 D4 (smaller floorstanding, ranked lower, estimated 3.5/5), the Bowers & Wilkins 801 D4 (larger floorstanding, ranked higher, estimated 3.7/5) and the Bowers & Wilkins HTM81 D4 (center, rated 3.3/5).
Pros: Larger 6-inch Turbine Head midrange and dual 8-inch Aerofoil woofers yield effortless dynamic scale and authoritative low-frequency reach to 17Hz. Benchmark industrial craftsmanship and acoustic isolation.
Cons: Non-flat frequency voicing with energetic top-end presence departs from neutral studio target curves. Enormous 194-lb weight and 3.0-ohm impedance dips require uncompromised amplification and spacious room placement.
Full Bowers & Wilkins 802 D4 review and specifications →
| Released | Aug 2021 (5 years ago) |
|---|---|
| Bass Extension (-3dB) | 17Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 48”H x 16.3”W x 23.7”D (1218 x 413 x 602 mm) |
| Drivers | 1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange in Turbine Head, 2 x 8” (200mm) Aerofoil bass units |
| Frequency Response | 17Hz - 28kHz (+/- 3dB, manufacturer specified) |
| Impedance | 8 ohms nominal, 3.0 ohms minimum (manufacturer specified) |
| Sensitivity | 90dB (2.83V/1m, manufacturer specified) |
| Weight | 194.2 lbs (88.1 kg) each |
| Woofer Cabinet | ported, down-firing Flowport |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
Bowers & Wilkins 803 D4: $25,000 per pair Estimated Bowers & Wilkins eBay
Newer model: the Bowers & Wilkins 803 D5, ranked higher, estimated 3.6/5, released Jul 2026.
Older model: the Bowers & Wilkins 803 D3 (ranked lower, estimated 3.4/5). See every Bowers & Wilkins 800 Series generation.
Same family: the Bowers & Wilkins 805 D4 (bookshelf, estimated 3.2/5), the Bowers & Wilkins 804 D4 (smaller floorstanding, ranked lower, estimated 3.4/5), the Bowers & Wilkins 802 D4 (larger floorstanding, ranked higher, estimated 3.6/5), the Bowers & Wilkins 801 D4 (larger floorstanding, ranked higher, estimated 3.7/5) and the Bowers & Wilkins HTM81 D4 (center, rated 3.3/5).
Pros: Incorporates the iconic all-aluminum Turbine Head dedicated midrange enclosure, isolating the 5-inch Continuum driver from cabinet resonances. Dual 7-inch Aerofoil drivers achieve true sub-20Hz in-room extension (19Hz -3dB).
Cons: Pronounced treble elevation imparts a distinctly bright character that can fatigue ears on hot recordings. Heavy 137-lb cabinet and 3.0-ohm minimum impedance require high-current amplification.
Full Bowers & Wilkins 803 D4 review and specifications →
| Released | Aug 2021 (5 years ago) |
|---|---|
| Bass Extension (-3dB) | 19Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 45.9”H x 14.1”W x 20.1”D (1165 x 357 x 511 mm) |
| Drivers | 1” (25mm) Diamond dome tweeter, 5” (130mm) Continuum cone FST midrange in Turbine Head, 2 x 7” (180mm) Aerofoil bass units |
| Frequency Response | 19Hz - 28kHz (+/- 3dB, manufacturer specified) |
| Impedance | 8 ohms nominal, 3.0 ohms minimum (manufacturer specified) |
| Sensitivity | 90dB (2.83V/1m, manufacturer specified) |
| Weight | 137 lbs (62.15 kg) each |
| Woofer Cabinet | ported, down-firing Flowport |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons