Bowers & Wilkins 803 D5 Review: Ranked #145 of 188

Last updated: October 8, 2026

The Bowers & Wilkins 803 D5 ranks #145 out of 188 total Large Size Floorstanding Speakers for sound quality. See all Passive Home rankings for every top pick.

Brand: Bowers & Wilkins

Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#145 Bowers & Wilkins 803 D5: $35,000 per pair Estimated Bowers & Wilkins eBay

Older models: the Bowers & Wilkins 803 D4 (ranked lower, estimated 3.5/5) and the Bowers & Wilkins 803 D3 (ranked lower, estimated 3.4/5).

Same family: the Bowers & Wilkins 805 D5 (bookshelf, estimated 3.3/5), the Bowers & Wilkins 804 D5 (smaller floorstanding, ranked lower, estimated 3.5/5), the Bowers & Wilkins 802 D5 (larger floorstanding, ranked higher, estimated 3.7/5), the Bowers & Wilkins 801 D5 (larger floorstanding, ranked higher, estimated 3.8/5), the Bowers & Wilkins HTM82 D5 (smaller center, estimated 3.3/5) and the Bowers & Wilkins HTM81 D5 (larger center, estimated 3.4/5).

Pros: The first 800 D5 model with the separate turbine head midrange enclosure: a 1” diamond dome tweeter on top, a 5” Continuum FST midrange in its own head, and two 7” Aerofoil bass drivers. B&W rates it to 19Hz (±3dB) with 90dB sensitivity, so it plays loud from modest amplifier power.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the 800 D4 models it replaces. Bowers & Wilkins’ house voicing, which the measured HTM81 D4 showed as a 4.9dB spread across the listening window, is likely to carry over, so expect a less neutral balance than similarly priced Revel or KEF models. The impedance dips to 3.0 ohms and each speaker weighs 63.7kg.

DIY KitNo
Dimensions45.9”H x 11.9”W x 18.6”D (1165 x 301 x 473 mm)
Drivers1” (25mm) Diamond dome tweeter, 5” (130mm) Continuum cone FST midrange, 2 x 7” (180mm) Aerofoil bass
Frequency Response19Hz - 28kHz ±3dB (manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight140.4 lbs (63.7 kg) each
Woofer Cabinetported

More Bowers & Wilkins speakers →