Short answer: the EX10 for measured performance if the price works, the A-10 for a flexible passive install. These rank #10 and #11 of 19 10-inch PA speakers, priced $1700 apart.
The EX10 measures notably deeper. Its vendor data returns a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this size class, driven by a 3-inch-diaphragm compression driver and integrated DSP tuned for vocal clarity and controlled throw. The A-10 comes in lower at 4.21 preference score with a shallower roughly 80Hz measured extension.
The A-10 is passive, which changes the buying calculus entirely. It needs an external amplifier and processing to perform correctly, adding cost and complexity that the fully active EX10 avoids, but that also means installers can choose their own amp and DSP rather than being locked to what is built in. The A-10’s 70° x 55° coverage pattern is narrower and its fly-point-and-pole-mount system leans toward permanent installation.
Controls are spare on both. The EX10 has no onboard mixer or app control and asks a premium roughly $2,900 price for it, while the A-10’s passive design means all control lives in the external amp and processor.
Buy the EX10 if you want an active, vocal-focused box with deeper measured bass and can absorb the higher price.
Buy the A-10 if you are running a passive install and want to choose your own amplification and DSP.
Specifications Side By Side
| Vue Audiotechnik A-10 | KV2 Audio EX10 | |
|---|---|---|
| Price | $1,200.00 | $2,900.00 |
| Ranked | #10 of 19 in 10-Inch Two-Way Powered PA Speakers | #11 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Passive 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" woofer, compression driver | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 67Hz - 20kHz (manufacturer specified) | 65Hz - 20kHz (-3dB, manufacturer specified) |
| Dimensions | Not published by VUE in the current product page | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) |
| Inputs | Passive input connections: not published by VUE in the current product page | Balanced female XLR input; male XLR through output |
| Amplifier Power | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) | 500W continuous (450W LF + 50W HF, manufacturer specified) |
| Coverage | 70° x 55° | - |
| Maximum SPL | 127dB peak (manufacturer specified) | - |
| Bass Extension (-3dB) | 80Hz (measured, vendor Spinorama data) | 54.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No | No |
| Cabinet Material | Multi-ply cross-grain laminated birch plywood | Baltic birch plywood |
| Rigging | Integrated fly points and pole-mount system | - |
| Weight | 31.5 lbs / 14.3 kg | - |
| Crossover Frequency | - | 1.6kHz (manufacturer specified) |
| DSP | - | Integrated crossover, phase alignment, EQ and protection |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- RCF KX 10-A vs Yamaha DXR10mkII
- RCF ART 710-A MK5 vs RCF NX 910-A
- Yamaha DXR10mkIII vs Yamaha DXR10mkII
- KV2 Audio EX10 vs RCF NX 910-A
- Yamaha DXR10mkII vs KV2 Audio EX10
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Vue Audiotechnik A-10: $1,200.00 eBay
Pros: Low-quality vendor data shows a 4.21 ideal-subwoofer preference score, and the passive point-source design keeps amplification and DSP choices flexible for installers building out a system.
Cons: Being passive, it needs an external amplifier and processing to perform correctly, adding cost and complexity that self-powered rivals avoid. Measured bass extension is shallow at roughly 80Hz.
Full Vue Audiotechnik A-10 review and specifications →
| Amplifier Power | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) |
|---|---|
| Bass Extension (-3dB) | 80Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Multi-ply cross-grain laminated birch plywood |
| Configuration | Passive 2-way bass-reflex PA speaker |
| Coverage | 70° x 55° |
| Dimensions | Not published by VUE in the current product page |
| Drivers | 10" woofer, compression driver |
| Frequency Response | 67Hz - 20kHz (manufacturer specified) |
| Inputs | Passive input connections: not published by VUE in the current product page |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Rigging | Integrated fly points and pole-mount system |
| Weight | 31.5 lbs / 14.3 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
KV2 Audio EX10: $2,900.00 B&H Photo Video eBay
Pros: Medium-quality vendor data gives it a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this ranking. Its 3-inch-diaphragm compression driver and integrated DSP target vocal clarity and controlled throw.
Cons: At a roughly $2,900 asking price this specialist box is far less accessible than the mainstream leaders, and user controls are comparatively spare without an onboard mixer or app control.
Full KV2 Audio EX10 review and specifications →
| Amplifier Power | 500W continuous (450W LF + 50W HF, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Baltic birch plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Crossover Frequency | 1.6kHz (manufacturer specified) |
| DSP | Integrated crossover, phase alignment, EQ and protection |
| Dimensions | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) |
| Drivers | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 65Hz - 20kHz (-3dB, manufacturer specified) |
| Inputs | Balanced female XLR input; male XLR through output |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons