Short answer: the DXR10mkII. It’s self-powered, more affordable, and measures better than the passive A-10. These rank #9 and #10 out of 19 10-inch powered PA speakers, priced at $814.99 and $1200, a $385.01 difference.
The DXR10mkII is a proven, broadly distributed workhorse. Medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup. Its own cons note it lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
The A-10 is passive and needs its own amplification. Low-quality vendor data shows a 4.21 ideal-subwoofer preference score, and the passive point-source design keeps amplification and DSP choices flexible for installers building out a system. But being passive adds cost and complexity that self-powered rivals avoid, and its own cons note measured bass extension is shallow at roughly 80Hz, shallower than the DXR10mkII’s 73Hz.
Everything else matches: neither has Bluetooth, and both top out with a 10-inch woofer and compression driver combination.
Buy the DXR10mkII for a ready-to-run active speaker with deeper measured bass and a lower price.
Buy the A-10 only if your project is a passive, amplifier-driven install where the point-source horn design is the priority.
Specifications Side By Side
| Yamaha DXR10mkII | Vue Audiotechnik A-10 | |
|---|---|---|
| Price | $814.99 | $1,200.00 |
| Ranked | #9 of 19 in 10-Inch Two-Way Powered PA Speakers | #10 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Passive 2-way bass-reflex PA speaker |
| Drivers | 10" woofer, 1.75" compression driver | 10" woofer, compression driver |
| Frequency Response | 56Hz - 20kHz (-10dB, manufacturer specified) | 67Hz - 20kHz (manufacturer specified) |
| Dimensions | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) | Not published by VUE in the current product page |
| Maximum SPL | 132dB peak (manufacturer specified) | 127dB peak (manufacturer specified) |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs | Passive input connections: not published by VUE in the current product page |
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) |
| Cabinet Material | Matte-finish ABS | Multi-ply cross-grain laminated birch plywood |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount | Integrated fly points and pole-mount system |
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) | 80Hz (measured, vendor Spinorama data) |
| DSP | Yes | - |
| Bluetooth | No | No |
| Weight | 30.6 lbs / 13.9 kg | 31.5 lbs / 14.3 kg |
| Coverage | - | 70° x 55° |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Turbosound NuQ102 vs Yamaha DXR10mkIII
- KV2 Audio EX10 vs RCF ART 710-A MK5
- RCF KX 10-A vs Yamaha DXR10mkIII
- Yamaha DXR10mkIII vs Vue Audiotechnik A-10
- Vue Audiotechnik A-10 vs RCF ART 710-A MK5
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Yamaha DXR10mkII: $814.99 Amazon B&H Photo Video Guitar Center eBay
Pros: A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.
Cons: It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
Full Yamaha DXR10mkII review and specifications →
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Matte-finish ABS |
| Configuration | Active 2-way bass-reflex PA speaker |
| DSP | Yes |
| Dimensions | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) |
| Drivers | 10" woofer, 1.75" compression driver |
| Frequency Response | 56Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount |
| Weight | 30.6 lbs / 13.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Vue Audiotechnik A-10: $1,200.00 eBay
Pros: Low-quality vendor data shows a 4.21 ideal-subwoofer preference score, and the passive point-source design keeps amplification and DSP choices flexible for installers building out a system.
Cons: Being passive, it needs an external amplifier and processing to perform correctly, adding cost and complexity that self-powered rivals avoid. Measured bass extension is shallow at roughly 80Hz.
Full Vue Audiotechnik A-10 review and specifications →
| Amplifier Power | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) |
|---|---|
| Bass Extension (-3dB) | 80Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Multi-ply cross-grain laminated birch plywood |
| Configuration | Passive 2-way bass-reflex PA speaker |
| Coverage | 70° x 55° |
| Dimensions | Not published by VUE in the current product page |
| Drivers | 10" woofer, compression driver |
| Frequency Response | 67Hz - 20kHz (manufacturer specified) |
| Inputs | Passive input connections: not published by VUE in the current product page |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Rigging | Integrated fly points and pole-mount system |
| Weight | 31.5 lbs / 14.3 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons