QSC K10.2 vs Yamaha DXR10mkII

Last updated: September 7, 2026

Short answer: choose between the QSC K10.2 and Yamaha DXR10mkII for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the QSC K10.2. This is the standout measured result in this ranking: medium-quality vendor data returns a 7.34 ideal-subwoofer preference score, even higher than the well-regarded K12.2’s own result. Extensive onboard DSP, a 1.4-inch titanium compression driver and QSC’s long market track record make it an unusually safe general-purpose 10-inch pick.

Why choose the Yamaha DXR10mkII. A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.

What to weigh before buying. The underlying Spinorama source is low quality, so its apparent measured lead deserves some caution. Its 130dB peak claim is modest next to some 10-inch rivals, and a subwoofer still matters for full-range music at event levels. It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.

Buy the QSC K10.2 when its stated coverage, output, processing, and deployment format best match the job.

Buy the Yamaha DXR10mkII when its stated strengths are the better match for the room and the rest of the PA.

QSC K10.2 vs Yamaha DXR10mkII

Specifications Side By Side

QSC K10.2 Yamaha DXR10mkII
Price$799.99$814.99
Ranked#1 of 19 in 10-Inch Two-Way Powered PA Speakers#9 of 19 in 10-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers10" woofer, 1.4" titanium compression driver10" woofer, 1.75" compression driver
Frequency Response56Hz - 20kHz (-6dB, manufacturer specified)56Hz - 20kHz (-10dB, manufacturer specified)
Dimensions20.4"H x 12.6"W x 11.8"D (519 x 320 x 300 mm)19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm)
Inputs2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputsXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs
Amplifier Power2025W peak (1800W LF + 225W HF)1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Cabinet MaterialImpact-resistant ABSMatte-finish ABS
Rigging2 x M10 inserts and pull-back point; 35mm pole mount3 x M8 points; 35mm dual-angle pole mount
Coverage90° conical-
Maximum SPL130dB peak (manufacturer specified)132dB peak (manufacturer specified)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)73Hz (measured, vendor Spinorama data)
DSPYesYes
BluetoothNoNo
Weight32 lbs / 14.5 kg30.6 lbs / 13.9 kg

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

QSC K10.2: $799.99 Amazon B&H Photo Video Guitar Center eBay

QSC K10.2 ranking card

Pros: This is the standout measured result in this ranking: medium-quality vendor data returns a 7.34 ideal-subwoofer preference score, even higher than the well-regarded K12.2’s own result. Extensive onboard DSP, a 1.4-inch titanium compression driver and QSC’s long market track record make it an unusually safe general-purpose 10-inch pick.

Cons: The underlying Spinorama source is low quality, so its apparent measured lead deserves some caution. Its 130dB peak claim is modest next to some 10-inch rivals, and a subwoofer still matters for full-range music at event levels.

Amplifier Power2025W peak (1800W LF + 225W HF)
Bass Extension (-3dB)56Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialImpact-resistant ABS
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° conical
DSPYes
Dimensions20.4"H x 12.6"W x 11.8"D (519 x 320 x 300 mm)
Drivers10" woofer, 1.4" titanium compression driver
Frequency Response56Hz - 20kHz (-6dB, manufacturer specified)
Inputs2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputs
Maximum SPL130dB peak (manufacturer specified)
Rigging2 x M10 inserts and pull-back point; 35mm pole mount
Weight32 lbs / 14.5 kg

Yamaha DXR10mkII: $814.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR10mkII ranking card

Pros: A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.

Cons: It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.

Amplifier Power1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Bass Extension (-3dB)73Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialMatte-finish ABS
ConfigurationActive 2-way bass-reflex PA speaker
DSPYes
Dimensions19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm)
Drivers10" woofer, 1.75" compression driver
Frequency Response56Hz - 20kHz (-10dB, manufacturer specified)
InputsXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs
Maximum SPL132dB peak (manufacturer specified)
Rigging3 x M8 points; 35mm dual-angle pole mount
Weight30.6 lbs / 13.9 kg