Short answer: choose between the RCF KX 10-A and Yamaha DXR10mkII for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF KX 10-A. The entry point into RCF’s flagship KX point-source range, with a 130dB claimed peak, a neodymium woofer and wide 100° x 50° coverage in a manageable 15.5kg cabinet.
The case for the Yamaha DXR10mkII. A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.
Important trade-offs. The local measurement is truncated and cannot produce a preference score, and pricing/retail availability are not yet well established for this model. It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
Buy the RCF KX 10-A when its stated format, coverage, and system features fit the job better.
Buy the Yamaha DXR10mkII when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| RCF KX 10-A | Yamaha DXR10mkII | |
|---|---|---|
| Price | $2,798.50 | $814.99 |
| Ranked | #7 of 19 in 10-Inch Two-Way Powered PA Speakers | #9 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex point-source PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" neodymium woofer, compression driver | 10" woofer, 1.75" compression driver |
| Frequency Response | 60Hz - 20kHz (manufacturer specified) | 56Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 20.1"H x 11.8"W x 17.5"D (510 x 300 x 445 mm) | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) |
| Coverage | 100° x 50° | - |
| Maximum SPL | 130dB peak (manufacturer specified) | 132dB peak (manufacturer specified) |
| Inputs | XLR and EtherCON RDNet input/link | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Amplifier Power | 2000W peak (1400W LF + 600W HF) | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
| Crossover Frequency | 1600Hz | - |
| Cabinet Material | Baltic birch plywood | Matte-finish ABS |
| Rigging | M10 inserts; 35mm pole mount | 3 x M8 points; 35mm dual-angle pole mount |
| Network Control | RDNet | - |
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) | 73Hz (measured, vendor Spinorama data) |
| DSP | Yes, FiRPHASE, Bass Motion Control and presets | Yes |
| Bluetooth | No | No |
| Weight | 34.2 lbs / 15.5 kg | 30.6 lbs / 13.9 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Vue Audiotechnik A-10 vs KV2 Audio EX10
- HK Audio LINEAR 7 110 XA vs Turbosound NuQ102
- Yamaha DXR10mkIII vs Vue Audiotechnik A-10
- RCF KX 10-A vs Yamaha DXR10mkIII
- Yamaha DXR10mkII vs KV2 Audio EX10
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF KX 10-A: $2,798.50 B&H Photo Video Guitar Center eBay
Pros: The entry point into RCF’s flagship KX point-source range, with a 130dB claimed peak, a neodymium woofer and wide 100° x 50° coverage in a manageable 15.5kg cabinet.
Cons: The local measurement is truncated and cannot produce a preference score, and pricing/retail availability are not yet well established for this model.
Full RCF KX 10-A review and specifications →
| Amplifier Power | 2000W peak (1400W LF + 600W HF) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Baltic birch plywood |
| Configuration | Active 2-way bass-reflex point-source PA speaker |
| Coverage | 100° x 50° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE, Bass Motion Control and presets |
| Dimensions | 20.1"H x 11.8"W x 17.5"D (510 x 300 x 445 mm) |
| Drivers | 10" neodymium woofer, compression driver |
| Frequency Response | 60Hz - 20kHz (manufacturer specified) |
| Inputs | XLR and EtherCON RDNet input/link |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Network Control | RDNet |
| Rigging | M10 inserts; 35mm pole mount |
| Weight | 34.2 lbs / 15.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DXR10mkII: $814.99 Amazon B&H Photo Video Guitar Center eBay
Pros: A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.
Cons: It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
Full Yamaha DXR10mkII review and specifications →
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Matte-finish ABS |
| Configuration | Active 2-way bass-reflex PA speaker |
| DSP | Yes |
| Dimensions | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) |
| Drivers | 10" woofer, 1.75" compression driver |
| Frequency Response | 56Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount |
| Weight | 30.6 lbs / 13.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons