Short answer: choose between the Yamaha DXR10mkIII and Vue Audiotechnik A-10 for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the Yamaha DXR10mkIII. The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.
The case for the Vue Audiotechnik A-10. Low-quality vendor data shows a 4.21 ideal-subwoofer preference score, and the passive point-source design keeps amplification and DSP choices flexible for installers building out a system.
Important trade-offs. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed. Measured bass extension is shallow at roughly 80Hz.
Buy the Yamaha DXR10mkIII when its stated format, coverage, and system features fit the job better.
Buy the Vue Audiotechnik A-10 when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| Yamaha DXR10mkIII | Vue Audiotechnik A-10 | |
|---|---|---|
| Price | $899.99 | $1,200.00 |
| Ranked | #8 of 19 in 10-Inch Two-Way Powered PA Speakers | #10 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Passive 2-way bass-reflex PA speaker |
| Drivers | 10" woofer, 1" throat/1.75" diaphragm compression driver | 10" woofer, compression driver |
| Frequency Response | 53Hz - 20kHz (-10dB, manufacturer specified) | 67Hz - 20kHz (manufacturer specified) |
| Dimensions | 19.8"H x 12.2"W x 12.2"D (502 x 310 x 310 mm) | Not published by VUE in the current product page |
| Coverage | 90° x 60° | 70° x 55° |
| Maximum SPL | 132dB peak (manufacturer specified) | 127dB peak (manufacturer specified) |
| Inputs | 2 x XLR/TRS combo; XLR thru and DSP outputs | Passive input connections: not published by VUE in the current product page |
| Amplifier Power | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) |
| Crossover Frequency | 1800Hz (FIR-X) | - |
| Cabinet Material | PP plastic | Multi-ply cross-grain laminated birch plywood |
| Rigging | 3 x M8 points plus U-bracket points; 35mm dual-angle pole mount | Integrated fly points and pole-mount system |
| Bass Extension (-3dB) | 61.5Hz (measured, vendor Spinorama data) | 80Hz (measured, vendor Spinorama data) |
| DSP | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote | - |
| Bluetooth | Bluetooth 5.0 audio streaming and D-Remote control | No |
| Weight | 32 lbs / 14.5 kg | 31.5 lbs / 14.3 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Turbosound NuQ102 vs RCF KX 10-A
- KV2 Audio EX10 vs RCF ART 710-A MK5
- RCF KX 10-A vs Yamaha DXR10mkII
- Yamaha DXR10mkII vs Vue Audiotechnik A-10
- Vue Audiotechnik A-10 vs RCF ART 710-A MK5
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Yamaha DXR10mkIII: $899.99 Amazon B&H Photo Video Guitar Center eBay
Pros: The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.
Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed.
Full Yamaha DXR10mkIII review and specifications →
| Amplifier Power | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
|---|---|
| Bass Extension (-3dB) | 61.5Hz (measured, vendor Spinorama data) |
| Bluetooth | Bluetooth 5.0 audio streaming and D-Remote control |
| Cabinet Material | PP plastic |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 1800Hz (FIR-X) |
| DSP | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
| Dimensions | 19.8"H x 12.2"W x 12.2"D (502 x 310 x 310 mm) |
| Drivers | 10" woofer, 1" throat/1.75" diaphragm compression driver |
| Frequency Response | 53Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | 2 x XLR/TRS combo; XLR thru and DSP outputs |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 3 x M8 points plus U-bracket points; 35mm dual-angle pole mount |
| Weight | 32 lbs / 14.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Vue Audiotechnik A-10: $1,200.00 eBay
Pros: Low-quality vendor data shows a 4.21 ideal-subwoofer preference score, and the passive point-source design keeps amplification and DSP choices flexible for installers building out a system.
Cons: Being passive, it needs an external amplifier and processing to perform correctly, adding cost and complexity that self-powered rivals avoid. Measured bass extension is shallow at roughly 80Hz.
Full Vue Audiotechnik A-10 review and specifications →
| Amplifier Power | Passive speaker; external amplifier required (manufacturer output rating not published in the current product page) |
|---|---|
| Bass Extension (-3dB) | 80Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Multi-ply cross-grain laminated birch plywood |
| Configuration | Passive 2-way bass-reflex PA speaker |
| Coverage | 70° x 55° |
| Dimensions | Not published by VUE in the current product page |
| Drivers | 10" woofer, compression driver |
| Frequency Response | 67Hz - 20kHz (manufacturer specified) |
| Inputs | Passive input connections: not published by VUE in the current product page |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Rigging | Integrated fly points and pole-mount system |
| Weight | 31.5 lbs / 14.3 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons