Short answer: the Revel F226Be. It ranks #10 of 73 floorstanding speakers by sound quality, rated 4.6/5, at $7,700; the Perlisten R5t ranks #21, rated 4.5/5, and costs $8,790, which makes this an easy call rather than a real tradeoff.
What the Revel F226Be does well: Compact three-way tower with a beryllium dome tweeter in an acoustic lens waveguide, a dedicated 5.25” mid-range, and dual 6.5” woofers (not a coaxial layout): all Deep Ceramic Composite aluminum cones engineered specifically to avoid breakup outside their crossover bands, and it measures that way: neither the woofers nor the mid-range show breakup spikes even well outside their intended pass bands, and even the front port measures unusually clean (only a mild ~3dB bump around 150Hz, well controlled versus the resonances the reviewer typically sees from ports). The catch: Minimum impedance dips to about 3.7-4 ohms below roughly 500Hz despite the 8-ohm nominal rating, so it wants a genuine 4-ohm-capable two-channel amplifier; budget AVRs rated only for 6 or 8 ohms may struggle.
The case for the Perlisten R5t: Measures a -3dB extension point of 44.6Hz and a Harman-style -6dB in-room extension (lfx) of 29Hz, deep for a mid-size tower, with a strong 0.82 listening-window smoothness score and a predicted in-room smoothness of 0.63. The catch: On-axis deviation of 0.277dB and a pronounced -0.28dB per octave downward slope point to a warmer, less forward tonal balance, consistent with Sound & Vision’s review finding it leans analytical rather than warm and wanting more air in larger rooms.
Buy the Revel F226Be. It is rated higher for sound quality than the Perlisten R5t and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Revel F226Be | Perlisten R5t | |
|---|---|---|
| Price | $7700 per pair | $8,790 per pair |
| Ranked | #10 of 73 in Large Size Floorstanding Speakers | #21 of 73 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) | 24Hz (bass reflex) / 38Hz (acoustic suspension) |
| Bass Extension (-3dB) | 56Hz (measured, Erin’s Audio Corner) | 44.6Hz (manufacturer spinorama data) |
| Dimensions | 41.3”H x 9.8”W x 13.7”D (1049 x 248.9 x 348 mm) | 43.3”H x 9.1”W x 13.8”D (1100 x 230 x 350 mm) |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) | 4 ohms nominal, 3.2 ohms minimum |
| Drivers | Two 6.5” (165mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter | 3x 26mm silk dome (tweeter + 2 midrange), 2x 165mm (6.5”) HPF woofers |
| Sensitivity | 89.7dB (measured, Erin’s Audio Corner) | 89.0dB @ 2.83V/1m |
| Weight | 58.2 lbs (26.4 kg) each | 58.4 lbs (26.5 kg) each |
| Woofer Cabinet | ported, front | - |
| Spinorama Preference Score | 5.96 (spinorama.org) | 7.16 |
| Spinorama Preference Score with Perfect Sub | 8.15 (spinorama.org) | 8.50 |
| DIY Kit | No | No |
| Enclosure | - | 3-way, switchable bass reflex / acoustic suspension |
| Power Handling | - | 100-250W RMS recommended amplifier power |
| Frequency Response | - | 80Hz-20kHz +/-1.5dB |
| Certification | - | THX Dominus, THX Ultra |
| Warranty | - | 5 years, extendable to 6 with product registration |
| Country | - | Designed in the United States (Verona, Wisconsin) |
| Maximum SPL | - | 113.0dB peak (manufacturer specified) |
Related Speaker Comparisons
More top alternatives to Revel F226Be:
- Revel F226Be vs KEF Blade Two Meta
- Revel F226Be vs MoFi SourcePoint V10 Master Edition
- MoFi SourcePoint 888 vs Revel F226Be
- Revel F328Be vs Revel F226Be
- Radiant Acoustics Clarity 66 vs Revel F226Be
Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel F226Be: $7700 per pair Crutchfield eBay
Older model: the Revel F206 (ranked lower, rated 4.5/5).
Pros: Compact three-way tower with a beryllium dome tweeter in an acoustic lens waveguide, a dedicated 5.25” mid-range, and dual 6.5” woofers (not a coaxial layout): all Deep Ceramic Composite aluminum cones engineered specifically to avoid breakup outside their crossover bands, and it measures that way: neither the woofers nor the mid-range show breakup spikes even well outside their intended pass bands, and even the front port measures unusually clean (only a mild ~3dB bump around 150Hz, well controlled versus the resonances the reviewer typically sees from ports). On-axis frequency response holds within about ±1.5dB above roughly 65Hz (excellent linearity) and off-axis behavior tracks it closely, with only mild, subdued peaking around 4-6kHz that doesn’t show up as real resonance in the spinorama data. Average sensitivity around 90dB (2.83V/1m), notably higher than some competing three-way designs and most bookshelf speakers, translating directly into better dynamic range at both low and high listening levels: one reviewer specifically praised its ability to deliver full transient impact (snare hits, kick drum) even at quiet, conversational volumes rather than needing to be cranked up to feel dynamic. Wide, consistent horizontal radiation of about ±60-70° at the -6dB point, landing right in the reviewer’s preferred range for an enveloping soundstage without excess diffusion, and exceptionally wide vertical dispersion: roughly ±80° up to 10kHz and still ±70° above that, which one reviewer called the widest vertical radiation pattern he had measured to date. Distortion stays under 3% even at 104dB SPL, and in real-world testing up to 105dB from 12-14 feet away, full-range with no crossover, the reviewer heard no audible mechanical noise, port chuffing, or compression at all. Flat enough on- and off-axis response that toeing the speaker 10-15° away from the listener preserves the same tonal balance rather than changing it, and the wide, well-controlled directivity lets sidewall reflections reinforce rather than smear the soundstage. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 89.7dB.
Cons: Minimum impedance dips to about 3.7-4 ohms below roughly 500Hz despite the 8-ohm nominal rating, so it wants a genuine 4-ohm-capable two-channel amplifier; budget AVRs rated only for 6 or 8 ohms may struggle. F3 of 56Hz and F10 of 36Hz mean it doesn’t extend nearly as low as some three-way rivals with larger woofers: a dedicated subwoofer (10-12”, or 15” for content below 30Hz) is recommended for home theater or bass-heavy music, even though the speaker itself can play surprisingly loud without one. Vertical directivity tolerance is tighter in the crossover handoff region than a true coaxial design would offer, since the tweeter, midrange, and woofers are physically separated: a mild directivity bump appears around 2-2.5kHz that’s typical of non-coaxial multi-way speakers, though not audibly problematic within about ±10° vertically. On-axis, the top end reads as a bit bright according to one reviewer’s subjective impression, generally benefiting from some toe-out. High-gloss cabinet finish can create distracting reflections if used behind a projector screen in a home theater setup. Front-ported, so it can technically sit close to a wall, but doing so makes the bass boomier.
Full Revel F226Be review and specifications →
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 41.3”H x 9.8”W x 13.7”D (1049 x 248.9 x 348 mm) |
| Drivers | Two 6.5” (165mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter |
| Impedance | 8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner) |
| Sensitivity | 89.7dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.96 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 8.15 (spinorama.org) |
| Weight | 58.2 lbs (26.4 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Revel PerformaBe F226Be Floorstanding Loudspeaker Review. I love this speaker. More from Erin’s Audio Corner →
- Erin’s Audio Corner: Should You Buy the Revel F226Be or the MoFi 888?
- Erin’s Audio Review Website Revel F226B
- Erin’s Audio Corner: My Top 5 Speakers at Any Price
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
Perlisten R5t: $8,790 per pair Audio Advice eBay
Pros: Measures a -3dB extension point of 44.6Hz and a Harman-style -6dB in-room extension (lfx) of 29Hz, deep for a mid-size tower, with a strong 0.82 listening-window smoothness score and a predicted in-room smoothness of 0.63. THX Dominus and THX Ultra certified at a fraction of Perlisten’s S7t flagship price, and reviewers across Sound & Vision, Audiograde, SoundStage Ultra and HiFiReport all rated it highly for its class, with Audiograde naming it a Best of 2023 pick. Measured bass extension of 24Hz (-10dB).
Cons: On-axis deviation of 0.277dB and a pronounced -0.28dB per octave downward slope point to a warmer, less forward tonal balance, consistent with Sound & Vision’s review finding it leans analytical rather than warm and wanting more air in larger rooms. It’s sold only in Piano Black through specialty AV dealers, with per-unit pricing that varies noticeably by retailer.
Full Perlisten R5t review and specifications →
| Bass Extension (-10dB) | 24Hz (bass reflex) / 38Hz (acoustic suspension) |
|---|---|
| Bass Extension (-3dB) | 44.6Hz (manufacturer spinorama data) |
| Certification | THX Dominus, THX Ultra |
| Country | Designed in the United States (Verona, Wisconsin) |
| DIY Kit | No |
| Dimensions | 43.3”H x 9.1”W x 13.8”D (1100 x 230 x 350 mm) |
| Drivers | 3x 26mm silk dome (tweeter + 2 midrange), 2x 165mm (6.5”) HPF woofers |
| Enclosure | 3-way, switchable bass reflex / acoustic suspension |
| Frequency Response | 80Hz-20kHz +/-1.5dB |
| Impedance | 4 ohms nominal, 3.2 ohms minimum |
| Maximum SPL | 113.0dB peak (manufacturer specified) |
| Power Handling | 100-250W RMS recommended amplifier power |
| Sensitivity | 89.0dB @ 2.83V/1m |
| Spinorama Preference Score | 7.16 |
| Spinorama Preference Score with Perfect Sub | 8.50 |
| Warranty | 5 years, extendable to 6 with product registration |
| Weight | 58.4 lbs (26.5 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons