Revel F226Be vs MoFi SourcePoint V10 Master Edition

Last updated: September 29, 2026

Short answer: the MoFi SourcePoint V10 Master Edition. It ranks #3 of 73 floorstanding speakers by sound quality, rated 4.8/5, at $7,995. The Revel F226Be ranks #10, rated 4.6/5, at $7,700, $295 cheaper, a saving that is not big enough to make up the sound-quality gap.

Revel F226Be vs MoFi SourcePoint V10 Master Edition

The case for the Revel F226Be: Compact three-way tower with a beryllium dome tweeter in an acoustic lens waveguide, a dedicated 5.25” mid-range, and dual 6.5” woofers (not a coaxial layout): all Deep Ceramic Composite aluminum cones engineered specifically to avoid breakup outside their crossover bands, and it measures that way: neither the woofers nor the mid-range show breakup spikes even well outside their intended pass bands, and even the front port measures unusually clean (only a mild ~3dB bump around 150Hz, well controlled versus the resonances the reviewer typically sees from ports). Watch for: Minimum impedance dips to about 3.7-4 ohms below roughly 500Hz despite the 8-ohm nominal rating, so it wants a genuine 4-ohm-capable two-channel amplifier; budget AVRs rated only for 6 or 8 ohms may struggle.

The case for the MoFi SourcePoint V10 Master Edition: Extended bass to approximately 30 Hz in-room without subwoofer; images with excellent precision indicating tight frequency response matching between speakers. The catch: Moderate sensitivity (~89 dB) means amplifier power requirements higher than many alternatives.

Buy the MoFi SourcePoint V10 Master Edition. It is rated higher for sound quality, and the $295 saving on the Revel F226Be is not enough to make up the difference.

Want more options? Browse the full Passive Home rankings.

Specifications Side By Side

Revel F226Be MoFi SourcePoint V10 Master Edition
Price$7700 per pair$7995 per pair
Ranked#10 of 73 in Large Size Floorstanding Speakers#3 of 73 in Large Size Floorstanding Speakers
Bass Extension (-10dB)36Hz (measured, Erin’s Audio Corner)25Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)56Hz (measured, Erin’s Audio Corner)38Hz (measured, Erin’s Audio Corner)
Dimensions41.3”H x 9.8”W x 13.7”D (1049 x 248.9 x 348 mm)48.8”H x 15.5”W x 19.9”D (1239.5 x 393.7 x 505.5 mm)
Impedance8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner)6 ohms nominal, 5.3 ohms minimum (measured, Erin’s Audio Corner)
DriversTwo 6.5” (165mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter10” woofer, 10” paper‑cone concentric midrange, 1.25” soft‑dome concentric tweeter
Sensitivity89.7dB (measured, Erin’s Audio Corner)88.8dB (measured, Erin’s Audio Corner)
Weight58.2 lbs (26.4 kg) each160.9 lbs (73 kg)
Woofer Cabinetported, frontpassive radiator
Spinorama Preference Score5.96 (spinorama.org)5.00
Spinorama Preference Score with Perfect Sub8.15 (spinorama.org)6.31
DIY KitNoNo

How MoFi SourcePoint V10 Master Edition compares with other leading options:

Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Revel F226Be: $7700 per pair Crutchfield eBay

Revel F226Be ranking card

Older model: the Revel F206 (ranked lower, rated 4.5/5).

Pros: Compact three-way tower with a beryllium dome tweeter in an acoustic lens waveguide, a dedicated 5.25” mid-range, and dual 6.5” woofers (not a coaxial layout): all Deep Ceramic Composite aluminum cones engineered specifically to avoid breakup outside their crossover bands, and it measures that way: neither the woofers nor the mid-range show breakup spikes even well outside their intended pass bands, and even the front port measures unusually clean (only a mild ~3dB bump around 150Hz, well controlled versus the resonances the reviewer typically sees from ports). On-axis frequency response holds within about ±1.5dB above roughly 65Hz (excellent linearity) and off-axis behavior tracks it closely, with only mild, subdued peaking around 4-6kHz that doesn’t show up as real resonance in the spinorama data. Average sensitivity around 90dB (2.83V/1m), notably higher than some competing three-way designs and most bookshelf speakers, translating directly into better dynamic range at both low and high listening levels: one reviewer specifically praised its ability to deliver full transient impact (snare hits, kick drum) even at quiet, conversational volumes rather than needing to be cranked up to feel dynamic. Wide, consistent horizontal radiation of about ±60-70° at the -6dB point, landing right in the reviewer’s preferred range for an enveloping soundstage without excess diffusion, and exceptionally wide vertical dispersion: roughly ±80° up to 10kHz and still ±70° above that, which one reviewer called the widest vertical radiation pattern he had measured to date. Distortion stays under 3% even at 104dB SPL, and in real-world testing up to 105dB from 12-14 feet away, full-range with no crossover, the reviewer heard no audible mechanical noise, port chuffing, or compression at all. Flat enough on- and off-axis response that toeing the speaker 10-15° away from the listener preserves the same tonal balance rather than changing it, and the wide, well-controlled directivity lets sidewall reflections reinforce rather than smear the soundstage. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 89.7dB.

Cons: Minimum impedance dips to about 3.7-4 ohms below roughly 500Hz despite the 8-ohm nominal rating, so it wants a genuine 4-ohm-capable two-channel amplifier; budget AVRs rated only for 6 or 8 ohms may struggle. F3 of 56Hz and F10 of 36Hz mean it doesn’t extend nearly as low as some three-way rivals with larger woofers: a dedicated subwoofer (10-12”, or 15” for content below 30Hz) is recommended for home theater or bass-heavy music, even though the speaker itself can play surprisingly loud without one. Vertical directivity tolerance is tighter in the crossover handoff region than a true coaxial design would offer, since the tweeter, midrange, and woofers are physically separated: a mild directivity bump appears around 2-2.5kHz that’s typical of non-coaxial multi-way speakers, though not audibly problematic within about ±10° vertically. On-axis, the top end reads as a bit bright according to one reviewer’s subjective impression, generally benefiting from some toe-out. High-gloss cabinet finish can create distracting reflections if used behind a projector screen in a home theater setup. Front-ported, so it can technically sit close to a wall, but doing so makes the bass boomier.

Bass Extension (-10dB)36Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)56Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions41.3”H x 9.8”W x 13.7”D (1049 x 248.9 x 348 mm)
DriversTwo 6.5” (165mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter
Impedance8 ohms nominal (3.7 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity89.7dB (measured, Erin’s Audio Corner)
Spinorama Preference Score5.96 (spinorama.org)
Spinorama Preference Score with Perfect Sub8.15 (spinorama.org)
Weight58.2 lbs (26.4 kg) each
Woofer Cabinetported, front

MoFi SourcePoint V10 Master Edition: $7995 per pair Crutchfield eBay

MoFi SourcePoint V10 Master Edition ranking card

Pros: Extended bass to approximately 30 Hz in-room without subwoofer; images with excellent precision indicating tight frequency response matching between speakers. Integrated bass management with three-way treble attenuation switches for room tuning. New design from Andrew Jones represents reviewer personal second choice (behind only KEF Blade 2 Meta at 29k) among hundreds of systems auditioned; ranks above Dutch & Dutch 8C, JBL 4367, and JBL M2. Measured bass extension of 38Hz (-3dB), with a measured sensitivity of 88.8dB.

Cons: Moderate sensitivity (~89 dB) means amplifier power requirements higher than many alternatives. Deep bass extension ends above subsonic frequencies (pipe organ territory below 17 Hz requires subwoofer).

Bass Extension (-10dB)25Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)38Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions48.8”H x 15.5”W x 19.9”D (1239.5 x 393.7 x 505.5 mm)
Drivers10” woofer, 10” paper‑cone concentric midrange, 1.25” soft‑dome concentric tweeter
Impedance6 ohms nominal, 5.3 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity88.8dB (measured, Erin’s Audio Corner)
Spinorama Preference Score5.00
Spinorama Preference Score with Perfect Sub6.31
Weight160.9 lbs (73 kg)
Woofer Cabinetpassive radiator