Short answer: the Danley SH50. It ranks #48 of 130 bookshelf speakers by sound quality; the Klipsch RP-600M II ranks #74.
What the Klipsch RP-600M II offers: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Watch for: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
What the Danley SH50 offers: A true point-source-style professional loudspeaker: two 12-inch woofers, four 5-inch midranges and a compression driver share one Synergy horn, preserving approximately 50° x 50° constant directivity through most of the passband. Erin measured roughly 97dB/2.83V/1m sensitivity, an F3 near 60Hz and extraordinary output. Distortion stayed below 1% above about 60Hz at 86dB, and compression remained negligible above roughly 70Hz even at 102dB. Broad response trends can be corrected with DSP without destroying the controlled radiation pattern. Watch for: This 133-pound, roughly 28-inch cube is engineered for venues and large rooms, not conventional domestic nearfield listening. Its narrow 50° coverage demands precise aiming and provides a small sweet area close up. Erin measured impedance just below 4 ohms near 100Hz and 1kHz; the high sensitivity eases voltage demand, but professional use still warrants a robust dedicated amplifier and DSP. A resonance/second-harmonic distortion feature around 900Hz and smaller nonminimum-phase response features cannot be fully equalized. Subwoofers remain appropriate below the approximately 60Hz measured F3.
Buy the Klipsch RP-600M II if the price matters more than sound quality. Buy the Danley SH50 if sound quality matters more than the price.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Klipsch RP-600M II | Danley SH50 | |
|---|---|---|
| Price | $449.99 per pair | $8,000 per pair |
| Ranked | #74 of 130 in Large Size Bookshelf Speakers | #48 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) | 43.4Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) | Approximately 60Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) | 28"H x 28"W x 25.5"D |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) | Just under 4 ohms near 100Hz and 1kHz (measured, Erin's Audio Corner) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) | Approximately 97dB/2.83V/1m (measured, Erin's Audio Corner) |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn | Two 12" woofers; four 5" midranges; 1" compression driver in Synergy horn |
| Weight | 13 lbs (5.9 kg) each | 132.9 lbs (60.3 kg) each |
| Woofer Cabinet | ported | - |
| Spinorama Preference Score | 4.75 | - |
| Spinorama Preference Score with Perfect Sub | 6.88 | - |
| Coverage | - | 50° horizontal x 50° vertical |
| Maximum SPL | - | 127dB continuous, 133dB peak (manufacturer specified) |
Related Speaker Comparisons
How Danley SH50 compares with other leading options:
- Buchardt Audio S400 vs Danley SH50
- ELAC Debut 3.0 DB63 vs Danley SH50
- Danley SH50 vs Dynaudio Contour 20i
- Danley SH50 vs Triad In-Room Gold LCR
- Klipsch RP-600M II vs Revel M106
Prices on this page were last checked September 14, 2026 at 1:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-600M II: $449.99 per pair Amazon eBay
Pros: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 86dB.
Cons: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
Full Klipsch RP-600M II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.75 |
| Spinorama Preference Score with Perfect Sub | 6.88 |
| Weight | 13 lbs (5.9 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: The Truth about Klipsch’s “NEW” Sound. RP-600M Update. More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Klipsch RP-600M II
- GR-Research: We Bought The "NEW" RP-600M II Is KLIPSCH Listening?! More from GR-Research →
- Erin’s Audio Corner: 5 AWESOME SPEAKERS Under $1000 You Won’t Regret
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Klipsch RP-600M II vs Dynaudio Emit 20
- Klipsch RP-600M II vs Philharmonic BMR Monitor
- Klipsch RP-600M II vs JBL Studio 630
- Klipsch RP-600M II vs Behringer B2030P
- Klipsch RP-600M II vs Ascend CBM-170 SE2
- Klipsch RP-600M II vs Infinity Reference R162
- Klipsch RP-600M II vs GR-Research X-LS Encore
- Klipsch RP-600M II vs Infinity IL10
- See all 72 comparisons
Danley SH50: $8,000 per pair Danley Dealer Contact eBay
Pros: A true point-source-style professional loudspeaker: two 12-inch woofers, four 5-inch midranges and a compression driver share one Synergy horn, preserving approximately 50° x 50° constant directivity through most of the passband. Erin measured roughly 97dB/2.83V/1m sensitivity, an F3 near 60Hz and extraordinary output. Distortion stayed below 1% above about 60Hz at 86dB, and compression remained negligible above roughly 70Hz even at 102dB. Broad response trends can be corrected with DSP without destroying the controlled radiation pattern. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 97dB.
Cons: This 133-pound, roughly 28-inch cube is engineered for venues and large rooms, not conventional domestic nearfield listening. Its narrow 50° coverage demands precise aiming and provides a small sweet area close up. Erin measured impedance just below 4 ohms near 100Hz and 1kHz; the high sensitivity eases voltage demand, but professional use still warrants a robust dedicated amplifier and DSP. A resonance/second-harmonic distortion feature around 900Hz and smaller nonminimum-phase response features cannot be fully equalized. Subwoofers remain appropriate below the approximately 60Hz measured F3.
Full Danley SH50 review and specifications →
| Bass Extension (-10dB) | 43.4Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | Approximately 60Hz (measured, Erin's Audio Corner) |
| Coverage | 50° horizontal x 50° vertical |
| Dimensions | 28"H x 28"W x 25.5"D |
| Drivers | Two 12" woofers; four 5" midranges; 1" compression driver in Synergy horn |
| Impedance | Just under 4 ohms near 100Hz and 1kHz (measured, Erin's Audio Corner) |
| Maximum SPL | 127dB continuous, 133dB peak (manufacturer specified) |
| Sensitivity | Approximately 97dB/2.83V/1m (measured, Erin's Audio Corner) |
| Weight | 132.9 lbs (60.3 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons