Klipsch Forte IV vs Klipsch Heresy IV

Last updated: August 18, 2026

Short answer: the Klipsch Forte IV for better sound quality, the Klipsch Heresy IV for the lower price. The Klipsch Forte IV ranks #33 of 56 floorstanding speakers at $5499.98. The Klipsch Heresy IV ranks #34 at $3198, $2301.98 cheaper.

What the Klipsch Forte IV gets right: Three-way heritage design: a 1” titanium tweeter and 1.75” compression driver for the midrange mated to a 12” woofer, plus a 15” passive radiator for extra bass reinforcement. The catch: Contrary to the classic Klipsch reputation for being forward and bright, this model is actually somewhat recessed in the 1.5-4kHz “presence” region, which can make some tracks sound dull or lacking in detail.

What the Klipsch Heresy IV offers: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement—well below Klipsch’s 99dB in-room claim, but still excellent—and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. Watch for: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction.

Buy the Klipsch Forte IV if sound quality matters more than the price. Buy the Klipsch Heresy IV if the price matters more than sound quality.

Klipsch Forte IV vs Klipsch Heresy IV

Specifications Side By Side

Klipsch Forte IV Klipsch Heresy IV
Price$5,499.98$3,198/pair
Ranked#33 of 56 in Large Size Floorstanding Speakers#34 of 56 in Large Size Floorstanding Speakers
Bass Extension (-10dB)39Hz (measured, Erin’s Audio Corner)-
Bass Extension (-3dB)82Hz (measured, Erin’s Audio Corner)77Hz (measured, Erin’s Audio Corner)
Sensitivity93.8dB (measured average, Erin’s Audio Corner; manufacturer rates 99dB in-room / ~94dB anechoic)94.5dB/2.83V/1m (measured, Erin’s Audio Corner)
Drivers1x 12" (305mm) fiber-composite woofer + 15" passive radiator, 1x 1.75" compression driver midrange on horn, 1x 1" titanium compression tweeter on horn1" horn-loaded tweeter; 1.75" horn-loaded midrange; 12" woofer
Weight117.3 lbs / 53.2 kg45 lb each
Woofer Cabinetpassive radiatorported, rear
Impedance8 ohmsApproximately 4 ohms minimum (measured, Erin’s Audio Corner)
Dimensions36"H x 16.5"W x 13"D (914.4 x 419.1 x 330.2 mm)24.8"H x 15.6"W x 13.3"D

More useful head-to-heads from the same speaker class:

The Two Speakers In Full

Klipsch Forte IV: $5,499.98 Amazon Crutchfield

Klipsch Forte IV ranking card

Pros: Three-way heritage design: a 1” titanium tweeter and 1.75” compression driver for the midrange mated to a 12” woofer, plus a 15” passive radiator for extra bass reinforcement. Genuinely resonance-free cabinet, a clear improvement over the notably boomy, resonant Heresy 4 in the same lineup. Surprisingly wide, expansive soundstage that beat both the Heresy 4 and a KEF LS50 Wireless 2 in direct comparison - images occasionally appeared several feet outside the physical speaker location. Deeper bass extension than the Heresy 4 (F3 of 82Hz, about 10Hz lower). Distortion measures well below 1% at 86dB and stays mostly within 1% even at 96dB. Comes as a factory-matched serial-numbered pair, backed by an unusually generous 10-year warranty. Mostly above 4 ohms impedance, so it’s compatible with AVRs, solid-state, or tube amplifiers. More neutral overall than other Klipsch models the reviewer has tested, making it a reasonable pick for listeners who already like the “Klipsch sound” but want something more balanced.

Cons: Contrary to the classic Klipsch reputation for being forward and bright, this model is actually somewhat recessed in the 1.5-4kHz “presence” region, which can make some tracks sound dull or lacking in detail. A peak around 6kHz reads as sibilant and “painful” when seated exactly on the tweeter axis; sitting a bit above that axis reduces it somewhat. Klipsch’s marketed 99dB sensitivity figure is an in-room rating that assumes 3-6dB of boundary gain - anechoic sensitivity measures closer to 94dB, which the manufacturer does disclose but can still mislead buyers comparing spec sheets. Radiation width isn’t consistent across all frequencies - a noticeable notch around 2-3kHz interrupts otherwise wide dispersion, which can cause a fundamental tone and its harmonics to image in slightly different places in the soundstage. Uses shallow low-pass crossover slopes (despite Klipsch’s steep-crossover marketing, which applies only to the high-pass side), likely contributing to some of the measured dips and possible cone-breakup artifacts. Some compression shows up around the midrange crossover point at very high output (102dB), though likely only audible at extreme volumes. At around $5,000/pair, a significant investment, and still needs a subwoofer for material extending below about 50Hz.

Bass Extension (-10dB)39Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)82Hz (measured, Erin's Audio Corner)
Dimensions36"H x 16.5"W x 13"D (914.4 x 419.1 x 330.2 mm)
Drivers1x 12" (305mm) fiber-composite woofer + 15" passive radiator, 1x 1.75" compression driver midrange on horn, 1x 1" titanium compression tweeter on horn
Impedance8 ohms
Sensitivity93.8dB (measured average, Erin's Audio Corner; manufacturer rates 99dB in-room / ~94dB anechoic)
Weight117.3 lbs / 53.2 kg
Woofer Cabinetpassive radiator

As an eBay Partner, we may be compensated if you make a purchase.

Klipsch Heresy IV: $3,198/pair Amazon Crutchfield

Klipsch Heresy IV ranking card

Pros: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement—well below Klipsch’s 99dB in-room claim, but still excellent—and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. The compact, furniture-grade Heritage cabinet is easier to place than most high-efficiency designs, and dynamics at moderate levels can sound lively. A stable four-ohm-capable amplifier can produce substantial SPL with relatively little voltage.

Cons: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction. The impedance dips to about 4 ohms, reducing the practical amplifier advantage implied by its sensitivity. Pronounced directivity mismatch at the driver transitions, impedance/response resonances and elevated distortion spikes around the crossover remain audible concerns that EQ cannot fully solve. At 102dB Erin measured roughly 1.5dB midband compression; at 96dB distortion rises around crossover. Performance is difficult to justify at the price, and Erin explicitly did not recommend it.

Bass Extension (-3dB)77Hz (measured, Erin's Audio Corner)
Dimensions24.8"H x 15.6"W x 13.3"D
Drivers1" horn-loaded tweeter; 1.75" horn-loaded midrange; 12" woofer
ImpedanceApproximately 4 ohms minimum (measured, Erin's Audio Corner)
Sensitivity94.5dB/2.83V/1m (measured, Erin's Audio Corner)
Weight45 lb each
Woofer Cabinetported, rear

As an eBay Partner, we may be compensated if you make a purchase.