JBL 4367 vs Revel F206

Last updated: October 1, 2026

Short answer: the JBL 4367, unless the Revel F206’s lower price is decisive. The F206’s spinorama shows a pretty even on-axis response, but it carries directivity error around 3kHz and a small peak around 4.5kHz. The 4367 answers with a 15” front-ported woofer and a compression driver on a controlled-dispersion horn crossed at 700Hz, at roughly $16,500 per pair.

JBL 4367 vs Revel F206

Buy the JBL 4367 only if you find one used in good condition; both are discontinued, and it is the better rated of the two. For a new speaker, start with the MoFi SourcePoint V10 Master Edition instead.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

JBL 4367 Revel F206
Price$16,500 per pair Discontinued$2,000 per pair used, Discontinued
Ranked#11 of 74 in Large Size Floorstanding Speakers#18 of 74 in Large Size Floorstanding Speakers
Bass Extension (-10dB)31Hz (measured, Erin’s Audio Corner)34Hz (measured, Audio Science Review)
Bass Extension (-3dB)43Hz (measured, Erin’s Audio Corner)60Hz (measured, Audio Science Review)
Dimensions37.2”H x 22.2”W x 16.8”D (944.9 x 563.9 x 426.7 mm)40.3”H x 8.4”W x 12.2”D (1023.6 x 213.4 x 309.9 mm)
Impedance4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin’s Audio Corner)4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review)
Sensitivity92.5dB (measured average, Erin’s Audio Corner)87dB (measured, Audio Science Review)
Drivers15” (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3” (75mm) D2430K dual compression tweeterDual 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Weight119 lbs (54 kg) each57.3 lbs (26 kg) each
Woofer Cabinetported, frontported, front
Spinorama Preference Score5.075.51
Spinorama Preference Score with Perfect Sub6.887.52
DIY KitNoNo

How JBL 4367 compares with other leading options:

Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

JBL 4367: $16,500 per pair Discontinued eBay

JBL 4367 ranking card

Newer model: the JBL 4369. It’s likely to perform similarly, though we don’t have measurements to confirm that yet.

Pros: Three-way design pairing a 15” front-ported woofer with a compression driver on a controlled-dispersion horn/waveguide, crossed over at 700Hz. On-axis frequency response is nearly dead flat, holding within about ±1.5dB, with the listening window tracking it closely except right at the crossover. Distortion stays below 1% THD across the entire audible band at both 86dB and 96dB. Compression/dynamic-range linearity is exceptional: within about a quarter of a dB from 76dB to 102dB, among the best the reviewer has measured. High sensitivity (about 92.6dB average) eases the amplifier match despite the speaker’s size. Minimal rear radiation thanks to the 15” woofer’s directivity and front-firing ports: rear energy runs about 20dB down from the primary wavefront, giving it a near-cardioid radiation pattern. Well-controlled horn directivity keeps the soundstage from noticeably shifting in width across the 700Hz crossover region. A natural high-frequency rolloff above about 7-8kHz gives it an easy, non-fatiguing character for extended listening sessions. Measured bass extension of 43Hz (-3dB), with a measured sensitivity of 92.5dB.

Cons: At roughly $16500/pair, this is a major investment: the reviewer recommends buying from a dealer with a liberal return policy. Vertical response shows dips beyond about ±10-20°, with a larger null further out: an inherent trade-off of mating a 15” woofer to a horn compression driver at a 700Hz crossover, since crossing lower would hurt power handling and dynamic range. Horizontal directivity isn’t perfectly consistent with frequency: narrow (about ±20°) through 200-800Hz, briefly widening to near ±50° above the crossover, then narrowing again at high frequency. An unusual, non-constant pattern. The high-frequency rolloff that gives it an easy-listening character also reduces the sense of air and space in the soundstage when listening from off-center seats. Massive and heavy (about 120 lbs, roughly 36-37” tall): needs to be raised on a stand to bring the horn to ear level, and isn’t something one person easily moves alone. Only modest EQ adjustment is available on the speaker itself (about ±1-2dB bass/treble trim). Discontinued.

Bass Extension (-10dB)31Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)43Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions37.2”H x 22.2”W x 16.8”D (944.9 x 563.9 x 426.7 mm)
Drivers15” (380mm) 2216Nd-1 Dual Differential Drive® woofer, 3” (75mm) D2430K dual compression tweeter
Impedance4 ohms nominal (5.3 ohms minimum above 80Hz, measured by Erin’s Audio Corner)
Sensitivity92.5dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score5.07
Spinorama Preference Score with Perfect Sub6.88
Weight119 lbs (54 kg) each
Woofer Cabinetported, front

Revel F206: $2,000 per pair used Discontinued eBay

Revel F206 ranking card

Newer model: the Revel F226Be, ranked higher, rated 4.6/5.

Pros: CEA2034 spinorama shows a pretty even on-axis response. Predicted in-room response is excellent, with a smooth downward slope. Horizontal beamwidth of about ±65 degrees is wide, if a bit uneven. Distortion is very nice at 86dB SPL/1m, falling below the frequency range where human hearing is most sensitive, and stays excellent even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice suppression of port and woofer resonances. Really amazing value for the performance. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 87dB.

Cons: Some directivity error and a small peak around 4.5kHz show up alongside the directivity error around 3kHz. Vertical directivity means listening position needs to stay within the tweeter axis, though the reviewer notes there is some leeway. Minimum impedance dips to 3.3 ohms, calling for an amplifier comfortable with a demanding load. Discontinued.

Bass Extension (-10dB)34Hz (measured, Audio Science Review)
Bass Extension (-3dB)60Hz (measured, Audio Science Review)
DIY KitNo
Dimensions40.3”H x 8.4”W x 12.2”D (1023.6 x 213.4 x 309.9 mm)
DriversDual 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Impedance4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review)
Sensitivity87dB (measured, Audio Science Review)
Spinorama Preference Score5.51
Spinorama Preference Score with Perfect Sub7.52
Weight57.3 lbs (26 kg) each
Woofer Cabinetported, front