Anker Soundcore Space One vs Razer BlackShark V2 Pro

Last updated: October 10, 2026

Short answer: the Anker Soundcore Space One. It ranks #104 of 134 over-ear headphones by sound quality, rated 3.1/5, at $84.99; the Razer BlackShark V2 Pro ranks #110, rated 3.0/5, and costs $109.99, which makes this an easy call rather than a real tradeoff.

Anker Soundcore Space One vs Razer BlackShark V2 Pro

The case for the Anker Soundcore Space One: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. The tradeoff: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh.

The Razer BlackShark V2 Pro is the longer-running choice. A wireless gaming headset with a built-in microphone, Bluetooth 5.2 and a rated 70 hours of battery, so it rarely needs charging. It is rated for 70 hours of battery against 40 for the Anker Soundcore Space One. The catch: The response is uneven, with a standard deviation near 3.5 dB, so tonal balance drifts from the target in music.

Buy the Anker Soundcore Space One. It is rated higher for sound quality than the Razer BlackShark V2 Pro and costs less, which makes it the one to get unless you need something the other one does better.

Looking for alternatives? See the complete Headphones rankings.

Specifications Side By Side

Anker Soundcore Space One Razer BlackShark V2 Pro
Price$84.99$109.99
Ranked#104 of 134 in Over-Ear Headphones#110 of 134 in Over-Ear Headphones
Form FactorOver-earOver-ear
Harman Preference Score62 (measured by oratory1990, via AutoEQ)60 (measured by crinacle, via AutoEQ)
Deviation From Target3.96 dB standard deviation3.47 dB standard deviation
Tonal Tilt-0.17 (negative is warmer, positive brighter)-0.69 (negative is warmer, positive brighter)
ConnectionWireless and wiredWireless
BackClosedClosed
Driver TypeDynamicDynamic
Drivers1 x 40mm dynamic1 x 50mm dynamic
Impedance16 ohms32 ohms
Weight0.6 lbs (260 g)0.7 lbs (320 g)
Frequency Response20Hz - 20kHz (Manufacturer specified)12Hz - 28kHz (Manufacturer specified)
Active Noise CancellingYesNo
Battery Life40 hours (55 without ANC, Manufacturer specified)70 hours (Manufacturer specified)
Bluetooth Version5.35.2
Bluetooth CodecsSBC, AAC, LDAC-
Built-in MicrophoneYesYes
IP RatingNoneNone
Sensitivity-100 dB SPL/mW

More worthwhile head-to-heads for Anker Soundcore Space One:

Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Anker Soundcore Space One: $84.99 Amazon eBay

Anker Soundcore Space One ranking card

Pros: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. The bass lift of about 4 dB below 60 Hz and 3 dB through the upper bass gives kick drums and synth bass a strong rumble, which suits bassy and v-shaped tastes. At 260 g it is on the light side for an ANC over-ear.

Cons: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh. A 5.6 dB dip near 3.3 kHz and a 3 dB hole in the low mids pull back vocal presence and body. The response is uneven overall, with a standard deviation near 4 dB.

ReleasedAug 2023 (3 years ago)
Active Noise CancellingYes
BackClosed
Battery Life40 hours (55 without ANC, Manufacturer specified)
Bluetooth CodecsSBC, AAC, LDAC
Bluetooth Version5.3
Built-in MicrophoneYes
ConnectionWireless and wired
Deviation From Target3.96 dB standard deviation
Driver TypeDynamic
Drivers1 x 40mm dynamic
Form FactorOver-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score62 (measured by oratory1990, via AutoEQ)
IP RatingNone
Impedance16 ohms
Tonal Tilt-0.17 (negative is warmer, positive brighter)
Weight0.6 lbs (260 g)
EQ preset to match the Harman target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz-4.6 dB0.70
Peak494 Hz+4.5 dB0.46
Peak1,335 Hz-6.2 dB1.43
Peak123 Hz-3.7 dB1.54
Peak3,318 Hz+5.1 dB3.60
High shelf10,000 Hz-7.0 dB0.70
Peak8,910 Hz-5.2 dB1.18
Peak5,539 Hz+4.9 dB3.90
Peak2,387 Hz+2.3 dB6.00
Peak382 Hz-1.5 dB6.00

Razer BlackShark V2 Pro: $109.99 Amazon eBay

Razer BlackShark V2 Pro ranking card

Pros: A wireless gaming headset with a built-in microphone, Bluetooth 5.2 and a rated 70 hours of battery, so it rarely needs charging. Its Harman preference score of 60 in crinacle’s measurement is fairly close to the target for a gaming headset. The 50mm driver at 32 ohms and 100 dB SPL/mW is easy to drive, and the price is low.

Cons: The response is uneven, with a standard deviation near 3.5 dB, so tonal balance drifts from the target in music. It has no active noise cancelling, and at 320 g it is on the heavy side. The Anker Soundcore Space One has a higher rating and offers ANC and LDAC for a lower price.

ReleasedJun 2023 (3 years ago)
Active Noise CancellingNo
BackClosed
Battery Life70 hours (Manufacturer specified)
Bluetooth Version5.2
Built-in MicrophoneYes
ConnectionWireless
Deviation From Target3.47 dB standard deviation
Driver TypeDynamic
Drivers1 x 50mm dynamic
Form FactorOver-ear
Frequency Response12Hz - 28kHz (Manufacturer specified)
Harman Preference Score60 (measured by crinacle, via AutoEQ)
IP RatingNone
Impedance32 ohms
Sensitivity100 dB SPL/mW
Tonal Tilt-0.69 (negative is warmer, positive brighter)
Weight0.7 lbs (320 g)
EQ preset to match the Harman target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+1.9 dB0.70
Peak153 Hz-7.6 dB0.72
Peak625 Hz+5.9 dB0.85
Peak3,612 Hz-4.0 dB4.82
Peak398 Hz+2.5 dB2.18
High shelf10,000 Hz-1.5 dB0.70
Peak2,525 Hz+2.7 dB3.01
Peak1,373 Hz-1.5 dB2.52
Peak1,953 Hz+1.0 dB3.23
Peak3,166 Hz-1.8 dB5.42