Short answer: the Anker Soundcore Space One. It ranks #161 of 216 over-ear headphones by sound quality, rated 3.1/5, at $84.99; the Shure SRH440A ranks #169, rated 3.0/5, and costs $109, so there is not much of a tradeoff to weigh.
What the Anker Soundcore Space One does well: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. Watch for: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh.
The case for the Shure SRH440A: Bass is lifted about 3 dB below 60 Hz and 5.6 dB from 60 to 200 Hz, which gives kick drums and bass lines a strong punch. The tradeoff: The low end is heavy enough to add warmth and some boom to the lower mids on bass-heavy music.
Buy the Anker Soundcore Space One. It is rated higher for sound quality than the Shure SRH440A and costs less, so only choose the other one for a particular feature it does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Anker Soundcore Space One | Shure SRH440A | |
|---|---|---|
| Price | $84.99 | $109.00 |
| Ranked | #161 of 216 in Over-Ear Headphones | #169 of 216 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 62 (measured by oratory1990, via AutoEQ) | 60 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 3.96 dB standard deviation | 2.73 dB standard deviation |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) | -1.32 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+7.3 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+1.8 dB at 30 Hz) |
| Connection | Wireless and wired | Wired |
| Back | Closed | Closed |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 40mm dynamic | - |
| Impedance | 16 ohms | 44 ohms |
| Weight | 0.6 lbs (260 g) | 0.7 lbs (311 g) |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 10Hz - 22kHz (Manufacturer specified) |
| Active Noise Cancelling | Yes | - |
| Battery Life | 40 hours (55 without ANC, Manufacturer specified) | - |
| Bluetooth Version | 5.3 | - |
| Bluetooth Codecs | SBC, AAC, LDAC | - |
| Built-in Microphone | Yes | - |
| IP Rating | None | - |
| Sensitivity | - | 105 dB/mW |
Related Headphone Comparisons
More top alternatives to Anker Soundcore Space One:
- Sennheiser HD 280 Pro vs Anker Soundcore Space One
- Anker Soundcore Space One vs Razer BlackShark V2 Pro
- Anker Soundcore Space One vs Sennheiser ACCENTUM
- Sennheiser HD 280 Pro vs Shure SRH440A
- Shure SRH440A vs Sennheiser ACCENTUM
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Anker Soundcore Space One: $84.99 Wireless Amazon eBay
Pros: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. The bass lift of about 4 dB below 60 Hz and 3 dB through the upper bass gives kick drums and synth bass a strong rumble, which suits bassy and v-shaped tastes. At 260 g it is on the light side for an ANC over-ear.
Cons: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh. A 5.6 dB dip near 3.3 kHz and a 3 dB hole in the low mids pull back vocal presence and body. The response is uneven overall, with a standard deviation near 4 dB.
Full Anker Soundcore Space One review and specifications →
| Released | Aug 2023 (3 years ago) |
|---|---|
| Active Noise Cancelling | Yes |
| Back | Closed |
| Battery Life | 40 hours (55 without ANC, Manufacturer specified) |
| Bluetooth Codecs | SBC, AAC, LDAC |
| Bluetooth Version | 5.3 |
| Built-in Microphone | Yes |
| Connection | Wireless and wired |
| Deviation From Target | 3.96 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 40mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 62 (measured by oratory1990, via AutoEQ) |
| IP Rating | None |
| Impedance | 16 ohms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+7.3 dB at 30 Hz) |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (260 g) |
EQ preset to match the Harman target
Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.6 dB | 0.70 |
| Peak | 494 Hz | +4.5 dB | 0.46 |
| Peak | 1,335 Hz | -6.2 dB | 1.43 |
| Peak | 123 Hz | -3.7 dB | 1.54 |
| Peak | 3,318 Hz | +5.1 dB | 3.60 |
| High shelf | 10,000 Hz | -7.0 dB | 0.70 |
| Peak | 8,910 Hz | -5.2 dB | 1.18 |
| Peak | 5,539 Hz | +4.9 dB | 3.90 |
| Peak | 2,387 Hz | +2.3 dB | 6.00 |
| Peak | 382 Hz | -1.5 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Shure SRH440A: $109.00 Amazon eBay
Older model: the Shure SRH440 (ranked higher, rated 4.6/5). See every Shure SRH440 generation.
Pros: Bass is lifted about 3 dB below 60 Hz and 5.6 dB from 60 to 200 Hz, which gives kick drums and bass lines a strong punch. The midrange is close to target, within about 1.3 dB, and the response is fairly smooth with a standard deviation under 3 dB in oratory1990’s measurement. At 44 ohms and 105 dB/mW it runs fine from a phone, and the closed back isolates from outside noise.
Cons: The low end is heavy enough to add warmth and some boom to the lower mids on bass-heavy music. A 3.9 dB dip near 4.1 kHz recesses vocal presence, while treble above 10 kHz sits about 3.5 dB over target. It is wired only with no microphone listed, and the Anker Soundcore Space One has a higher rating with wireless and noise cancelling.
Full Shure SRH440A review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.73 dB standard deviation |
| Driver Type | Dynamic |
| Form Factor | Over-ear |
| Frequency Response | 10Hz - 22kHz (Manufacturer specified) |
| Harman Preference Score | 60 (measured by oratory1990, via AutoEQ) |
| Impedance | 44 ohms |
| Sensitivity | 105 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.8 dB at 30 Hz) |
| Tonal Tilt | -1.32 (negative is warmer, positive brighter) |
| Weight | 0.7 lbs (311 g) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 160 Hz | -5.5 dB | 0.47 |
| Peak | 4,109 Hz | +5.0 dB | 3.87 |
| Peak | 1,427 Hz | +2.5 dB | 0.85 |
| Peak | 310 Hz | +5.5 dB | 2.14 |
| High shelf | 10,000 Hz | -4.0 dB | 0.70 |
| Peak | 51 Hz | -0.6 dB | 1.71 |
| Peak | 88 Hz | +0.7 dB | 2.65 |
| Peak | 189 Hz | -0.5 dB | 3.16 |
| Peak | 5,300 Hz | -0.7 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons