Short answer: the Sennheiser HD 280 Pro. It ranks #97 of 134 over-ear headphones by sound quality, rated 3.2/5, at $89.98; the Anker Soundcore Space One ranks #104, rated 3.1/5, at $84.99. With prices this close, go by the sound-quality ranking rather than the cost.
Why pick the Sennheiser HD 280 Pro: Sub-bass is about 4 dB above target while mid and upper bass are right on it, so low notes gain depth without muddiness. The tradeoff: A 8 dB dip near 4.2 kHz and presence about 5 dB low push vocals and snare attack back, and treble above 6 kHz also runs 4 dB low.
What the Anker Soundcore Space One does well: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. The catch: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh.
Buy the Sennheiser HD 280 Pro. It is rated higher for sound quality, and the $4.99 you would save on the Anker Soundcore Space One does not close the gap.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Sennheiser HD 280 Pro | Anker Soundcore Space One | |
|---|---|---|
| Price | $89.98 | $84.99 |
| Ranked | #97 of 134 in Over-Ear Headphones | #104 of 134 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 64 (measured by oratory1990, via AutoEQ) | 62 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 2.55 dB standard deviation | 3.96 dB standard deviation |
| Tonal Tilt | -1.16 (negative is warmer, positive brighter) | -0.17 (negative is warmer, positive brighter) |
| Connection | Wired | Wireless and wired |
| Back | Closed | Closed |
| Driver Type | Dynamic | Dynamic |
| Impedance | 64 ohms | 16 ohms |
| Sensitivity | 113 dB SPL | - |
| Weight | 0.6 lbs (285 g) | 0.6 lbs (260 g) |
| Frequency Response | 8Hz - 25kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Drivers | - | 1 x 40mm dynamic |
| Active Noise Cancelling | - | Yes |
| Battery Life | - | 40 hours (55 without ANC, Manufacturer specified) |
| Bluetooth Version | - | 5.3 |
| Bluetooth Codecs | - | SBC, AAC, LDAC |
| Built-in Microphone | - | Yes |
| IP Rating | - | None |
Related Headphone Comparisons
How Sennheiser HD 280 Pro compares with other leading options:
- Audio-Technica ATH-M20x vs Sennheiser HD 280 Pro
- Sennheiser HD 280 Pro vs Sony WH-CH510
- Audio-Technica ATH-AD700X vs Sennheiser HD 280 Pro
- Anker Soundcore Space One vs Razer BlackShark V2 Pro
- Sony WH-CH510 vs HyperX Cloud II
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Sennheiser HD 280 Pro: $89.98 Amazon eBay
Pros: Sub-bass is about 4 dB above target while mid and upper bass are right on it, so low notes gain depth without muddiness. The closed back isolates well for monitoring and tracking, and 113 dB sensitivity makes the 64 ohm driver easy to power from a phone. It weighs 285 g.
Cons: A 8 dB dip near 4.2 kHz and presence about 5 dB low push vocals and snare attack back, and treble above 6 kHz also runs 4 dB low. The result is dark and a little veiled, with less air and sparkle than the target. It is wired only and has no built-in microphone listed.
Full Sennheiser HD 280 Pro review and specifications →
| Released | 2003 (23 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.55 dB standard deviation |
| Driver Type | Dynamic |
| Form Factor | Over-ear |
| Frequency Response | 8Hz - 25kHz (Manufacturer specified) |
| Harman Preference Score | 64 (measured by oratory1990, via AutoEQ) |
| Impedance | 64 ohms |
| Sensitivity | 113 dB SPL |
| Tonal Tilt | -1.16 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (285 g) |
EQ preset to match the Harman target
Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.2 dB | 0.70 |
| Peak | 475 Hz | -2.1 dB | 0.42 |
| Peak | 3,946 Hz | +5.9 dB | 1.82 |
| Peak | 77 Hz | +4.7 dB | 2.17 |
| Peak | 41 Hz | -3.0 dB | 1.35 |
| High shelf | 10,000 Hz | +3.0 dB | 0.70 |
| Peak | 126 Hz | -3.7 dB | 3.71 |
| Peak | 178 Hz | +2.3 dB | 3.81 |
| Peak | 101 Hz | +2.7 dB | 6.00 |
| Peak | 7,834 Hz | +1.1 dB | 3.95 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Anker Soundcore Space One: $84.99 Amazon eBay
Pros: Wireless noise cancelling headphones with LDAC, AAC and SBC support, Bluetooth 5.3 and a rated 40 hours of battery (55 without ANC), plus a wired option and a built-in microphone. The bass lift of about 4 dB below 60 Hz and 3 dB through the upper bass gives kick drums and synth bass a strong rumble, which suits bassy and v-shaped tastes. At 260 g it is on the light side for an ANC over-ear.
Cons: The treble is far hotter than the target, about 6 dB over from 6 to 16 kHz with a sharp peak of 12.6 dB near 9 kHz, so cymbals and sibilant vocals turn bright and can sound harsh. A 5.6 dB dip near 3.3 kHz and a 3 dB hole in the low mids pull back vocal presence and body. The response is uneven overall, with a standard deviation near 4 dB.
Full Anker Soundcore Space One review and specifications →
| Released | Aug 2023 (3 years ago) |
|---|---|
| Active Noise Cancelling | Yes |
| Back | Closed |
| Battery Life | 40 hours (55 without ANC, Manufacturer specified) |
| Bluetooth Codecs | SBC, AAC, LDAC |
| Bluetooth Version | 5.3 |
| Built-in Microphone | Yes |
| Connection | Wireless and wired |
| Deviation From Target | 3.96 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 40mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 62 (measured by oratory1990, via AutoEQ) |
| IP Rating | None |
| Impedance | 16 ohms |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (260 g) |
EQ preset to match the Harman target
Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.6 dB | 0.70 |
| Peak | 494 Hz | +4.5 dB | 0.46 |
| Peak | 1,335 Hz | -6.2 dB | 1.43 |
| Peak | 123 Hz | -3.7 dB | 1.54 |
| Peak | 3,318 Hz | +5.1 dB | 3.60 |
| High shelf | 10,000 Hz | -7.0 dB | 0.70 |
| Peak | 8,910 Hz | -5.2 dB | 1.18 |
| Peak | 5,539 Hz | +4.9 dB | 3.90 |
| Peak | 2,387 Hz | +2.3 dB | 6.00 |
| Peak | 382 Hz | -1.5 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons