Short answer: a tie on sound quality. Both are rated 3.0/5 (#110 and #111 of 134 over-ear headphones) at nearly the same price ($109.99 vs $109), so choose on features and fit.
Why pick the Razer BlackShark V2 Pro: A wireless gaming headset with a built-in microphone, Bluetooth 5.2 and a rated 70 hours of battery, so it rarely needs charging. The catch: The response is uneven, with a standard deviation near 3.5 dB, so tonal balance drifts from the target in music.
The case for the Shure SRH440A: Bass is lifted about 3 dB below 60 Hz and 5.6 dB from 60 to 200 Hz, which gives kick drums and bass lines a strong punch. The catch: The low end is heavy enough to add warmth and some boom to the lower mids on bass-heavy music.
Buy the Razer BlackShark V2 Pro or the Shure SRH440A on features: they are rated the same for sound quality at close to the same price.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Razer BlackShark V2 Pro | Shure SRH440A | |
|---|---|---|
| Price | $109.99 | $109.00 |
| Ranked | #110 of 134 in Over-Ear Headphones | #111 of 134 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 60 (measured by crinacle, via AutoEQ) | 60 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 3.47 dB standard deviation | 2.73 dB standard deviation |
| Tonal Tilt | -0.69 (negative is warmer, positive brighter) | -1.32 (negative is warmer, positive brighter) |
| Back | Closed | Closed |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 50mm dynamic | - |
| Impedance | 32 ohms | 44 ohms |
| Sensitivity | 100 dB SPL/mW | 105 dB/mW |
| Weight | 0.7 lbs (320 g) | 0.7 lbs (311 g) |
| Frequency Response | 12Hz - 28kHz (Manufacturer specified) | 10Hz - 22kHz (Manufacturer specified) |
| Active Noise Cancelling | No | - |
| Battery Life | 70 hours (Manufacturer specified) | - |
| Bluetooth Version | 5.2 | - |
| Built-in Microphone | Yes | - |
| IP Rating | None | - |
| Connection | Wireless | Wired |
Related Headphone Comparisons
More top alternatives to Razer BlackShark V2 Pro:
- Anker Soundcore Space One vs Razer BlackShark V2 Pro
- Razer BlackShark V2 Pro vs Audio-Technica ATH-AD500X
- Bose Noise Cancelling Headphones 700 vs Beats Studio3 Wireless
- Bose Noise Cancelling Headphones 700 vs Sennheiser HD 598 CS
- HyperX Cloud II vs Sennheiser HD 450BT
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Razer BlackShark V2 Pro: $109.99 Amazon eBay
Pros: A wireless gaming headset with a built-in microphone, Bluetooth 5.2 and a rated 70 hours of battery, so it rarely needs charging. Its Harman preference score of 60 in crinacle’s measurement is fairly close to the target for a gaming headset. The 50mm driver at 32 ohms and 100 dB SPL/mW is easy to drive, and the price is low.
Cons: The response is uneven, with a standard deviation near 3.5 dB, so tonal balance drifts from the target in music. It has no active noise cancelling, and at 320 g it is on the heavy side. The Anker Soundcore Space One has a higher rating and offers ANC and LDAC for a lower price.
Full Razer BlackShark V2 Pro review and specifications →
| Released | Jun 2023 (3 years ago) |
|---|---|
| Active Noise Cancelling | No |
| Back | Closed |
| Battery Life | 70 hours (Manufacturer specified) |
| Bluetooth Version | 5.2 |
| Built-in Microphone | Yes |
| Connection | Wireless |
| Deviation From Target | 3.47 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 50mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 12Hz - 28kHz (Manufacturer specified) |
| Harman Preference Score | 60 (measured by crinacle, via AutoEQ) |
| IP Rating | None |
| Impedance | 32 ohms |
| Sensitivity | 100 dB SPL/mW |
| Tonal Tilt | -0.69 (negative is warmer, positive brighter) |
| Weight | 0.7 lbs (320 g) |
EQ preset to match the Harman target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.9 dB | 0.70 |
| Peak | 153 Hz | -7.6 dB | 0.72 |
| Peak | 625 Hz | +5.9 dB | 0.85 |
| Peak | 3,612 Hz | -4.0 dB | 4.82 |
| Peak | 398 Hz | +2.5 dB | 2.18 |
| High shelf | 10,000 Hz | -1.5 dB | 0.70 |
| Peak | 2,525 Hz | +2.7 dB | 3.01 |
| Peak | 1,373 Hz | -1.5 dB | 2.52 |
| Peak | 1,953 Hz | +1.0 dB | 3.23 |
| Peak | 3,166 Hz | -1.8 dB | 5.42 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Shure SRH440A: $109.00 Amazon eBay
Older model: the Shure SRH440 (ranked higher, rated 4.6/5). See every Shure SRH440 generation.
Pros: Bass is lifted about 3 dB below 60 Hz and 5.6 dB from 60 to 200 Hz, which gives kick drums and bass lines a strong punch. The midrange is close to target, within about 1.3 dB, and the response is fairly smooth with a standard deviation under 3 dB in oratory1990’s measurement. At 44 ohms and 105 dB/mW it runs fine from a phone, and the closed back isolates from outside noise.
Cons: The low end is heavy enough to add warmth and some boom to the lower mids on bass-heavy music. A 3.9 dB dip near 4.1 kHz recesses vocal presence, while treble above 10 kHz sits about 3.5 dB over target. It is wired only with no microphone listed, and the Anker Soundcore Space One has a higher rating with wireless and noise cancelling.
Full Shure SRH440A review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.73 dB standard deviation |
| Driver Type | Dynamic |
| Form Factor | Over-ear |
| Frequency Response | 10Hz - 22kHz (Manufacturer specified) |
| Harman Preference Score | 60 (measured by oratory1990, via AutoEQ) |
| Impedance | 44 ohms |
| Sensitivity | 105 dB/mW |
| Tonal Tilt | -1.32 (negative is warmer, positive brighter) |
| Weight | 0.7 lbs (311 g) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 160 Hz | -5.5 dB | 0.47 |
| Peak | 4,109 Hz | +5.0 dB | 3.87 |
| Peak | 1,427 Hz | +2.5 dB | 0.85 |
| Peak | 310 Hz | +5.5 dB | 2.14 |
| High shelf | 10,000 Hz | -4.0 dB | 0.70 |
| Peak | 51 Hz | -0.6 dB | 1.71 |
| Peak | 88 Hz | +0.7 dB | 2.65 |
| Peak | 189 Hz | -0.5 dB | 3.16 |
| Peak | 5,300 Hz | -0.7 dB | 6.00 |
- Reviews, Comparisons and Sound Samples