Coverage note. Speaker Ranking currently covers 4 CCA models across headphones. These are the products in our database, not a complete list of everything CCA makes.
What this page covers. The CCA models ranked here span headphones, including CCA CRA, CCA C12 and CCA C10. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 4 CCA speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
In-Ear Headphones
Ranked #25 of 68 in In-Ear Headphones - CCA CRA: $20.99 Amazon eBay
Pros: A preference score of 72 in crinacle’s measurement is strong for one of the least expensive wired sets in its class, and the 1.98 dB deviation from target is among the smoothest in this group. The 111 dB sensitivity and 23.5 ohm impedance mean a phone drives it to high volume with ease. The slightly warm tilt suits listeners who like a touch of extra bass.
Cons: The tuning is a notch below the best sets in the class, and the slightly warm lean can soften treble detail for those who prefer a brighter sound. It has no listed frequency range or other extras, so the case for it rests on the tuning and low cost.
Full CCA CRA review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.98 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 72 (measured by crinacle, via AutoEQ) |
| Impedance | 23.5 ohms |
| Sensitivity | 111 dB |
| Tonal Tilt | -0.71 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.5 dB | 0.70 |
| Peak | 183 Hz | -2.3 dB | 1.19 |
| Peak | 818 Hz | +2.3 dB | 1.03 |
| Peak | 3,058 Hz | +2.5 dB | 2.13 |
| Peak | 1,484 Hz | -1.5 dB | 1.88 |
| High shelf | 10,000 Hz | -5.7 dB | 0.70 |
| Peak | 9,654 Hz | +2.4 dB | 2.57 |
| Peak | 6,044 Hz | +3.0 dB | 5.11 |
| Peak | 66 Hz | +0.7 dB | 2.30 |
| Peak | 4,821 Hz | -2.0 dB | 5.10 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #26 of 68 in In-Ear Headphones - CCA C12: $48.99 Amazon eBay
Pros: A preference score of 71 in crinacle’s measurement is respectable for a hybrid with one dynamic driver and five balanced armatures. The 24 ohm impedance and 112 dB/mW sensitivity make it easy to drive from any phone. A slightly warm tilt gives it a fuller, more relaxed presentation than a bright set.
Cons: The 2.2 dB deviation from the target shows the response still wanders, so tonal balance will not be fully natural. Crowding six drivers into one housing does not translate into a score above cheaper single-driver sets like the CCA CRA, which has a higher rating.
Full CCA C12 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.22 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 5 balanced armature) |
| Drivers | 1 x 10mm dynamic + 5 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 71 (measured by crinacle, via AutoEQ) |
| Impedance | 24 ohms |
| Sensitivity | 112 dB/mW |
| Tonal Tilt | -0.38 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.9 dB | 0.70 |
| Peak | 161 Hz | -3.6 dB | 0.61 |
| Peak | 677 Hz | +3.8 dB | 1.07 |
| Peak | 2,181 Hz | -3.3 dB | 3.04 |
| Peak | 7,371 Hz | +3.4 dB | 3.04 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 9,487 Hz | +2.8 dB | 2.05 |
| Peak | 3,358 Hz | +3.0 dB | 3.37 |
| Peak | 5,217 Hz | -3.3 dB | 6.00 |
| Peak | 2,530 Hz | -1.7 dB | 5.25 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #31 of 68 in In-Ear Headphones - CCA C10: $40.99 Amazon eBay
Pros: A preference score of 70 in crinacle’s measurement comes from a hybrid with one dynamic driver and four balanced armatures. At 32 ohms and 108 dB/mW it works comfortably from phones, and the slightly warm tilt makes for a relaxed sound.
Cons: The 2.3 dB deviation from the target leaves noticeable coloration, and the preference score trails the CCA C12 and MEE Audio M6 Pro, both of which rate higher. The extra balanced armatures do not lift it above simpler single-driver sets.
Full CCA C10 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.31 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 70 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB/mW |
| Tonal Tilt | -0.40 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.6 dB | 0.70 |
| Peak | 163 Hz | -3.5 dB | 0.68 |
| Peak | 795 Hz | +3.6 dB | 0.90 |
| Peak | 2,002 Hz | -3.7 dB | 2.10 |
| Peak | 3,348 Hz | +3.9 dB | 4.47 |
| High shelf | 10,000 Hz | +3.9 dB | 0.70 |
| Peak | 6,105 Hz | +3.6 dB | 5.09 |
| Peak | 4,532 Hz | -3.7 dB | 6.00 |
| Peak | 8,636 Hz | +1.0 dB | 4.78 |
| Peak | 5,236 Hz | +1.0 dB | 5.28 |
- Reviews, Comparisons and Sound Samples
Ranked #42 of 68 in In-Ear Headphones - CCA CSN: $25.99 Amazon eBay
Pros: A hybrid pairing of a 10 mm dynamic driver and a balanced armature gives Crinacle’s measurement a Harman preference score of 67, which is solid for a very inexpensive wired set. With 22.5 ohms and 112 dB/mW sensitivity it plays loud from a phone. The slight warm tilt of 0.46 dB keeps it from sounding harsh.
Cons: A deviation of 2.64 dB from the target leaves clear coloration in places. It is wired only with no microphone listed. The MEE Audio M6 Pro, CCA C10 and KZ ZST are all rated higher at close to the same cost.
Full CCA CSN review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.64 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 67 (measured by crinacle, via AutoEQ) |
| Impedance | 22.5 ohms |
| Sensitivity | 112 dB/mW |
| Tonal Tilt | -0.46 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.8 dB | 0.70 |
| Peak | 164 Hz | -3.5 dB | 0.59 |
| Peak | 3,200 Hz | +7.0 dB | 1.48 |
| Peak | 1,878 Hz | -6.0 dB | 1.38 |
| Peak | 809 Hz | +2.8 dB | 0.77 |
| High shelf | 10,000 Hz | +3.1 dB | 0.70 |
| Peak | 5,170 Hz | -4.2 dB | 5.86 |
| Peak | 6,353 Hz | +2.7 dB | 6.00 |
| Peak | 4,393 Hz | +1.6 dB | 6.00 |
| Peak | 37 Hz | -0.2 dB | 2.04 |
- Reviews, Comparisons and Sound Samples