The CCA CA16 ranks #1010 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: CCA
Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.

#1010 CCA CA16: $59.99 Discontinued eBay
Pros: About 3 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.
Cons: Treble about 2 dB above target from 3 to 10 kHz, which can sound sharp or tiring at higher volume. An uneven response, 2.8 dB standard deviation from target. Discontinued.
Is the CCA CA16 right for you?
Buy it if
- you like extra bass (about +3 dB below 150 Hz versus the target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 24 points.
Skip it if
- you are treble-sensitive (treble sits about 2.5 dB above target).
- you want to buy it new: it is discontinued.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.83 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 DD + 7 BA (1 x 7mm dynamic driver, 6 x 50024 balanced armatures, 1 x 30095 balanced armature) |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 64 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 24 ohms |
| Sensitivity | 102 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.4 dB at 30 Hz) |
| Tonal Tilt | -0.36 (negative is warmer, positive brighter) |
| Weight | 0.1 lbs (26 g) |
EQ Presets
Harman target
Set a preamp of -1.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 64.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.7 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 23 Hz | +3.3 dB | 1.67 |
| Peak | 174 Hz | -7.5 dB | 0.64 |
| Peak | 3,786 Hz | -3.0 dB | 6.00 |
| Peak | 5,889 Hz | -5.8 dB | 6.00 |
Neutral target
Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 33.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.2 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 23 Hz | +2.8 dB | 2.06 |
| Peak | 174 Hz | -7.4 dB | 0.60 |
| Peak | 3,786 Hz | -2.9 dB | 6.00 |
| Peak | 5,889 Hz | -5.8 dB | 6.00 |
Studio flat target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 14.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.7 dB | 0.70 |
| Peak | 181 Hz | -9.4 dB | 0.71 |
| Peak | 2,201 Hz | +3.1 dB | 2.15 |
| Peak | 3,927 Hz | -3.2 dB | 6.00 |
| Peak | 5,909 Hz | -7.6 dB | 4.75 |
Warm target
Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 66.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.5 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 23 Hz | +3.3 dB | 1.74 |
| Peak | 81 Hz | -1.4 dB | 2.20 |
| Peak | 174 Hz | -7.3 dB | 0.67 |
| Peak | 1,030 Hz | +1.4 dB | 1.06 |
| Peak | 3,831 Hz | -2.5 dB | 5.92 |
| Peak | 4,832 Hz | +2.9 dB | 6.00 |
| Peak | 6,320 Hz | -5.1 dB | 0.83 |
Bass target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.1 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 23 Hz | +3.4 dB | 1.57 |
| Peak | 175 Hz | -7.4 dB | 0.66 |
| Peak | 3,785 Hz | -3.0 dB | 6.00 |
| Peak | 5,889 Hz | -5.8 dB | 6.00 |
Bright target
Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 90 out of 100, up from 25.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.2 dB | 0.70 |
| High shelf | 10,000 Hz | -2.6 dB | 0.70 |
| Peak | 23 Hz | +2.8 dB | 2.10 |
| Peak | 82 Hz | -1.3 dB | 2.04 |
| Peak | 174 Hz | -7.4 dB | 0.60 |
| Peak | 1,820 Hz | +1.5 dB | 1.73 |
| Peak | 4,815 Hz | +3.9 dB | 6.00 |
V-shaped target
Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 91 out of 100, up from 65.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.7 dB | 0.70 |
| High shelf | 10,000 Hz | -1.3 dB | 0.70 |
| Peak | 23 Hz | +3.4 dB | 1.70 |
| Peak | 81 Hz | -1.4 dB | 2.29 |
| Peak | 174 Hz | -6.1 dB | 0.65 |
| Peak | 2,009 Hz | +2.1 dB | 2.57 |
| Peak | 4,823 Hz | +5.0 dB | 6.00 |
| Peak | 7,320 Hz | +2.0 dB | 5.68 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the CCA CA16 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 5 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 5 measurements from the squig.link databases of ducbloke, hbb, isaiahse, melatonin and pw. Thanks to each of them for publishing their work.