The CCA Xyrra ranks #604 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: CCA
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#604 CCA Xyrra: $24.99 Amazon $24.99 eBay
Pros: A very cheap hybrid with a dynamic driver and a balanced armature. Measurements show treble right on the Harman target and full sub-bass to 20 Hz (score 69 across seven measurements).
Cons: Bass sits about 3.2 dB above target, a bass heavy balance.
Is the CCA Xyrra right for you?
Buy it if
- you like extra bass (about +3 dB below 150 Hz versus the target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 21 points.
Skip it if
- you want the best value: the higher-rated TRN MT3 costs about $7 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.20 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 69 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 27 ohms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.5 dB at 30 Hz) |
| Tonal Tilt | -0.52 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 69.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.4 dB | 0.70 |
| High shelf | 10,000 Hz | -4.9 dB | 0.70 |
| Peak | 34 Hz | +0.9 dB | 1.78 |
| Peak | 174 Hz | -5.1 dB | 0.79 |
| Peak | 773 Hz | +1.7 dB | 2.71 |
| Peak | 1,939 Hz | -1.4 dB | 2.46 |
| Peak | 3,363 Hz | +2.8 dB | 4.26 |
| Peak | 4,775 Hz | -2.0 dB | 6.00 |
| Peak | 7,917 Hz | -2.9 dB | 6.00 |
Neutral target
Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 32.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.0 dB | 0.70 |
| High shelf | 10,000 Hz | -4.9 dB | 0.70 |
| Peak | 174 Hz | -4.9 dB | 0.71 |
| Peak | 758 Hz | +1.8 dB | 2.43 |
| Peak | 1,939 Hz | -1.4 dB | 2.47 |
| Peak | 3,361 Hz | +2.8 dB | 4.23 |
| Peak | 4,775 Hz | -2.0 dB | 6.00 |
| Peak | 7,917 Hz | -2.9 dB | 6.00 |
Studio flat target
Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 14.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -12.0 dB | 0.70 |
| High shelf | 10,000 Hz | +0.4 dB | 0.70 |
| Peak | 166 Hz | -7.1 dB | 0.73 |
| Peak | 791 Hz | +1.7 dB | 2.60 |
| Peak | 3,058 Hz | +4.6 dB | 3.12 |
| Peak | 4,870 Hz | -4.1 dB | 6.00 |
| Peak | 7,647 Hz | -3.1 dB | 6.00 |
Warm target
Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 72.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.2 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 174 Hz | -4.9 dB | 0.83 |
| Peak | 776 Hz | +2.0 dB | 2.53 |
| Peak | 1,939 Hz | -1.7 dB | 2.41 |
| Peak | 3,399 Hz | +2.5 dB | 5.03 |
| Peak | 4,805 Hz | -2.6 dB | 6.00 |
| Peak | 6,101 Hz | +2.2 dB | 6.00 |
| Peak | 8,000 Hz | -3.1 dB | 0.58 |
Bass target
Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.4 dB | 0.70 |
| High shelf | 10,000 Hz | -4.9 dB | 0.70 |
| Peak | 34 Hz | +1.1 dB | 1.57 |
| Peak | 175 Hz | -5.0 dB | 0.81 |
| Peak | 777 Hz | +1.7 dB | 2.80 |
| Peak | 1,939 Hz | -1.4 dB | 2.46 |
| Peak | 3,363 Hz | +2.8 dB | 4.27 |
| Peak | 4,775 Hz | -2.0 dB | 6.00 |
| Peak | 7,918 Hz | -2.9 dB | 6.00 |
Bright target
Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 24.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.0 dB | 0.70 |
| High shelf | 10,000 Hz | -1.0 dB | 0.70 |
| Peak | 174 Hz | -4.9 dB | 0.69 |
| Peak | 3,321 Hz | +2.6 dB | 6.00 |
| Peak | 5,345 Hz | +2.5 dB | 0.88 |
V-shaped target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.0 dB | 0.70 |
| High shelf | 10,000 Hz | +0.4 dB | 0.70 |
| Peak | 174 Hz | -3.7 dB | 0.84 |
| Peak | 1,728 Hz | -1.5 dB | 2.45 |
| Peak | 3,294 Hz | +2.7 dB | 5.90 |
| Peak | 5,345 Hz | +3.1 dB | 0.77 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the CCA Xyrra measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 7 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 7 measurements from the squig.link databases of ducbloke, eplv, jaytiss, practiphile, pw, soundcheck39 and tdl. Thanks to each of them for publishing their work.