Yanyin Moonlight Ultra Review: Ranked #221 of 1476

Last updated: October 21, 2026

The Yanyin Moonlight Ultra ranks #221 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Yanyin

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Yanyin Moonlight Ultra - ranked #221 of 1476 In-Ear Headphones · Editor's rating 4.4/5

#221 Yanyin Moonlight Ultra: $1289 eBay

Pros: A dynamic, four balanced armature and four electrostatic flagship with a preference score of 78 as the median of three measurements. Bass and midrange stay within about 0.5 dB of target, and two tuning switches per shell adjust the sound.

Cons: Treble from 5 to 8 kHz sits 4.5 dB low with a 6.8 dB dip near 5.9 kHz, so it can sound smooth but slightly dull. It is sold out at $1289, with only preorders available.

Is the Yanyin Moonlight Ultra right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
  • your taste runs warm: it scores 86 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 3.0 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

Released2023 (3 years ago)
BackClosed
ConnectionWired
Deviation From Target1.60 dB standard deviation
Driver TypeTribrid (dynamic + balanced armature + electrostatic)
Drivers1 x 10mm dynamic + 4 x balanced armature + 4 x electrostatic
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score78 (median of 3 squig.link measurements scored separately, calibrated to AutoEQ)
Impedance27 ohms
Sensitivity112 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.0 dB at 30 Hz)
Tonal Tilt-0.39 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 78.

FilterFrequencyGainQ
High shelf10,000 Hz-4.4 dB0.70
Peak175 Hz+0.9 dB1.57
Peak1,381 Hz-0.9 dB2.00
Peak3,145 Hz+1.7 dB6.00
Peak5,345 Hz+4.3 dB0.83

Neutral target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 41.

FilterFrequencyGainQ
Low shelf105 Hz-8.5 dB0.70
High shelf10,000 Hz-4.4 dB0.70
Peak36 Hz-0.5 dB0.54
Peak186 Hz+0.9 dB2.18
Peak1,381 Hz-0.9 dB2.01
Peak3,145 Hz+1.7 dB6.00
Peak5,345 Hz+4.3 dB0.83

Studio flat target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 23.

FilterFrequencyGainQ
Low shelf105 Hz-11.1 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak36 Hz-0.8 dB1.27
Peak255 Hz-1.1 dB0.40
Peak3,230 Hz+5.1 dB1.26
Peak4,393 Hz-2.5 dB5.81
Peak5,859 Hz+4.2 dB6.00

Warm target

Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 86.

FilterFrequencyGainQ
High shelf10,000 Hz-6.0 dB0.70
Peak173 Hz+1.0 dB0.82
Peak1,471 Hz-0.8 dB2.71
Peak3,246 Hz+2.6 dB4.76
Peak4,601 Hz-1.3 dB6.00
Peak5,863 Hz+5.1 dB3.31

Bass target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
High shelf10,000 Hz-4.4 dB0.70
Peak167 Hz+0.9 dB1.36
Peak1,381 Hz-0.9 dB1.82
Peak3,145 Hz+1.7 dB6.00
Peak5,345 Hz+4.3 dB0.83

Bright target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-8.5 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak36 Hz-0.6 dB0.79
Peak182 Hz+0.9 dB1.99
Peak1,381 Hz-1.1 dB1.90
Peak3,286 Hz+2.3 dB4.49
Peak5,345 Hz+5.3 dB0.79
Peak6,927 Hz-2.7 dB6.00

V-shaped target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+4.5 dB0.70
Peak182 Hz+2.2 dB0.94
Peak1,274 Hz-1.5 dB1.83
Peak3,286 Hz+2.5 dB3.92
Peak5,345 Hz+5.3 dB0.68
Peak6,981 Hz-3.2 dB5.85

Frequency Response

How the Yanyin Moonlight Ultra measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Yanyin Moonlight UltraHarman target
Measured frequency response of the Yanyin Moonlight Ultra-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: the median of 3 independent measurements from the squig.link databases of animagus, hbb and yanyin. Thanks to each of them for publishing their work.

More Yanyin headphones →