The Tansio Mirai Land ranks #250 out of 1490 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Tansio Mirai
Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#250 Tansio Mirai Land: $599 eBay
Pros: A dynamic, three balanced armature and two electrostatic tribrid with a preference score of 78. Bass reaches 20 Hz with a 2.4 dB upper bass lift, and the midrange stays within about 0.5 dB of target.
Cons: The tuning leans bright, with treble 2 to 4 dB above target and a 6.5 dB peak near 10.9 kHz. It is sold out after listing at $599, and the score rests on a single measurement.
Is the Tansio Mirai Land right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
- you want sub-bass rumble that reaches down to 20 Hz.
Skip it if
- you want the best value: the higher-rated QCY HT05 MeloBuds ANC costs about $565 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.72 dB standard deviation |
| Driver Type | Tribrid (dynamic + balanced armature + electrostatic) |
| Drivers | 1 x 10mm dynamic + 3 x balanced armature + 2 x electrostatic |
| Form Factor | In-ear |
| Harman Preference Score | 78 (1 squig.link measurement, calibrated to AutoEQ) |
| Impedance | 15 ohms |
| Sensitivity | 110 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.1 dB at 30 Hz) |
| Tonal Tilt | +0.36 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -2.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 78.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.4 dB | 0.70 |
| High shelf | 10,000 Hz | -3.5 dB | 0.70 |
| Peak | 174 Hz | -3.4 dB | 0.79 |
| Peak | 3,408 Hz | +2.2 dB | 4.31 |
| Peak | 5,932 Hz | -2.8 dB | 2.72 |
Neutral target
Set a preamp of -2.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 56.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.1 dB | 0.70 |
| High shelf | 10,000 Hz | -3.5 dB | 0.70 |
| Peak | 174 Hz | -3.4 dB | 0.70 |
| Peak | 3,406 Hz | +2.2 dB | 4.28 |
| Peak | 5,932 Hz | -2.8 dB | 2.73 |
Studio flat target
Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 37.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.7 dB | 0.70 |
| High shelf | 10,000 Hz | +1.6 dB | 0.70 |
| Peak | 169 Hz | -5.2 dB | 0.76 |
| Peak | 3,043 Hz | +4.0 dB | 2.92 |
| Peak | 5,768 Hz | -5.0 dB | 3.41 |
| Peak | 8,000 Hz | -1.8 dB | 2.62 |
Warm target
Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 69.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.6 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 174 Hz | -3.1 dB | 0.84 |
| Peak | 5,932 Hz | -4.8 dB | 1.47 |
Bass target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.1 dB | 0.70 |
| High shelf | 10,000 Hz | -3.5 dB | 0.70 |
| Peak | 174 Hz | -3.4 dB | 0.85 |
| Peak | 3,408 Hz | +2.2 dB | 4.33 |
| Peak | 5,932 Hz | -2.8 dB | 2.71 |
Bright target
Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 95 out of 100, up from 49.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.2 dB | 0.70 |
| High shelf | 10,000 Hz | +0.4 dB | 0.70 |
| Peak | 80 Hz | -1.0 dB | 2.57 |
| Peak | 174 Hz | -3.4 dB | 0.72 |
| Peak | 773 Hz | +1.5 dB | 2.75 |
| Peak | 1,519 Hz | -1.5 dB | 2.99 |
| Peak | 3,686 Hz | +3.2 dB | 2.40 |
V-shaped target
Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 92 out of 100, up from 68.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.5 dB | 0.70 |
| High shelf | 10,000 Hz | +1.6 dB | 0.70 |
| Peak | 174 Hz | -2.0 dB | 0.97 |
| Peak | 1,459 Hz | -1.7 dB | 4.00 |
| Peak | 3,745 Hz | +3.6 dB | 1.83 |
| Peak | 7,147 Hz | +1.6 dB | 3.72 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Tansio Mirai Land measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: a single measurement from the squig.link database of hbb. Thanks to them for publishing their work.