Tangzu x HBB Wu Zetian Review: Ranked #100 of 1476

Last updated: October 21, 2026

The Tangzu x HBB Wu Zetian ranks #100 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: TANGZU

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Tangzu x HBB Wu Zetian - ranked #100 of 1476 In-Ear Headphones · Editor's rating 4.6/5

#100 Tangzu x HBB Wu Zetian: $199 Discontinued eBay

Pros: A 14.5 mm planar IEM with a preference score of 81. Bass and midrange stay within about 1 dB of target to 20 Hz, and the cable comes with swappable 2.5, 3.5 and 4.4 mm plugs.

Cons: Presence and treble run about 2 dB low with dips of 4.5 dB near 4.1 kHz and 4 dB near 10.3 kHz, so it sounds a little relaxed. It is discontinued after selling for $199, and the score rests on a single measurement.

Is the Tangzu x HBB Wu Zetian right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 81).
  • you are sensitive to bright or sharp treble (treble sits 2.1 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want to buy it new: it is discontinued.
ReleasedDec 2022 (3 years ago)
BackClosed
ConnectionWired
Deviation From Target1.51 dB standard deviation
Driver TypePlanar magnetic
Drivers1 x 14.5mm planar magnetic
Form FactorIn-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score81 (1 squig.link measurement, calibrated to AutoEQ)
Impedance16 ohms
Sensitivity100 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz)
Tonal Tilt-0.25 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 81.

FilterFrequencyGainQ
Low shelf105 Hz+0.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-1.5 dB0.98
Peak1,827 Hz-1.6 dB2.92
Peak4,604 Hz+4.2 dB1.32

Neutral target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 45.

FilterFrequencyGainQ
Low shelf105 Hz-7.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-1.5 dB0.74
Peak1,834 Hz-1.6 dB3.01
Peak4,604 Hz+4.2 dB1.32

Studio flat target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 27.

FilterFrequencyGainQ
Low shelf105 Hz-10.4 dB0.70
Peak180 Hz-3.4 dB0.78
Peak3,407 Hz+4.6 dB1.53

Warm target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 84.

FilterFrequencyGainQ
Low shelf105 Hz+1.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-1.3 dB1.17
Peak707 Hz+1.2 dB1.93
Peak1,878 Hz-2.0 dB2.87
Peak4,110 Hz+2.5 dB3.04
Peak5,800 Hz+1.3 dB4.94
Peak7,713 Hz-2.1 dB6.00

Bass target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+4.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak190 Hz-1.6 dB1.10
Peak1,825 Hz-1.6 dB2.90
Peak4,604 Hz+4.2 dB1.32

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 34.

FilterFrequencyGainQ
Low shelf105 Hz-7.8 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak186 Hz-1.5 dB0.68
Peak1,815 Hz-1.7 dB2.78
Peak3,776 Hz+1.9 dB4.12
Peak5,345 Hz+6.0 dB1.08

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+5.2 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak525 Hz+0.8 dB1.70
Peak1,668 Hz-1.6 dB2.17
Peak2,904 Hz+1.2 dB6.00
Peak3,588 Hz+2.0 dB3.57
Peak5,345 Hz+6.0 dB0.96
Peak6,887 Hz-2.9 dB5.30

Frequency Response

How the Tangzu x HBB Wu Zetian measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Tangzu x HBB Wu ZetianHarman target
Measured frequency response of the Tangzu x HBB Wu Zetian-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of nymz. Thanks to them for publishing their work.

More TANGZU headphones →