The Sound Rhyme SR10 ranks #961 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Sound Rhyme
Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#961 Sound Rhyme SR10: 99.00 Penon Audio eBay
Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.
Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.4 dB standard deviation from target.
Is the Sound Rhyme SR10 right for you?
Buy it if
- you are sensitive to bright or sharp treble (treble sits 3.3 dB below target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 22 points.
Skip it if
- you want the best value: the higher-rated EPZ G10 costs about $75 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.39 dB standard deviation |
| Driver Type | Tribrid |
| Drivers | 10 drivers (2 dynamic drivers + 4 balanced armatures + 4 micro planar drivers) |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 40kHz |
| Harman Preference Score | 65 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 115 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) |
| Tonal Tilt | -1.03 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 65.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.7 dB | 0.70 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 183 Hz | -3.3 dB | 0.75 |
| Peak | 6,419 Hz | +3.3 dB | 0.72 |
Neutral target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 26.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.3 dB | 0.70 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 174 Hz | -3.2 dB | 0.63 |
| Peak | 6,418 Hz | +3.3 dB | 0.72 |
Studio flat target
Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 85 out of 100, up from 6.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.9 dB | 0.70 |
| High shelf | 10,000 Hz | +1.0 dB | 0.70 |
| Peak | 170 Hz | -5.2 dB | 0.67 |
| Peak | 2,605 Hz | +1.9 dB | 3.36 |
| Peak | 5,345 Hz | +2.5 dB | 0.40 |
Warm target
Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 78.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.5 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 178 Hz | -3.1 dB | 0.82 |
| Peak | 5,132 Hz | -1.5 dB | 6.00 |
| Peak | 6,734 Hz | +3.4 dB | 2.69 |
Bass target
Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 72.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.1 dB | 0.70 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 187 Hz | -3.3 dB | 0.79 |
| Peak | 6,422 Hz | +3.3 dB | 0.72 |
Bright target
Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 77 out of 100, up from 14.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.3 dB | 0.70 |
| High shelf | 10,000 Hz | -1.6 dB | 0.70 |
| Peak | 174 Hz | -3.2 dB | 0.62 |
| Peak | 3,889 Hz | +1.1 dB | 3.37 |
| Peak | 5,345 Hz | +4.9 dB | 0.98 |
| Peak | 6,805 Hz | -1.7 dB | 6.00 |
V-shaped target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 75 out of 100, up from 60.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.7 dB | 0.70 |
| High shelf | 10,000 Hz | -0.5 dB | 0.70 |
| Peak | 38 Hz | +0.7 dB | 1.89 |
| Peak | 178 Hz | -1.9 dB | 0.85 |
| Peak | 1,323 Hz | -1.1 dB | 3.77 |
| Peak | 3,893 Hz | +1.2 dB | 2.57 |
| Peak | 5,345 Hz | +5.1 dB | 0.85 |
| Peak | 6,907 Hz | -2.4 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Sound Rhyme SR10 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 3 measurements from the squig.link databases of atechreviews, flare and sl0the. Thanks to each of them for publishing their work.