Short answer: the Sound Rhyme SR10. Both are rated 3.3/5 for sound quality (#961 and #923 of 1369 in-ear headphones), and the Sound Rhyme SR10 costs $99 against $109 for the ARTTI T10 Pro, with sound quality a draw, the lower price decides it.
The case for the ARTTI T10 Pro: Bass is lifted about 3 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. Watch for: Presence sits about 4 dB low with a 4.9 dB dip near 6.3 kHz, so vocals and instruments lose some bite.
The case for the Sound Rhyme SR10: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap. The catch: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones.
Buy the Sound Rhyme SR10. Both are rated the same for sound quality, and it costs $10 less than the ARTTI T10 Pro.
Still deciding? The full Headphones rankings cover every ranked option.
Bass is lifted about 3 dB with extension to 20 Hz, giving kick drums and bass lines extra weight.
Amazon $109.00 eBay
A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.
Penon Audio eBayPrices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| ARTTI T10 Pro | Sound Rhyme SR10 | |
|---|---|---|
| Price | $109.00 | 99.00 |
| Ranked | #923 of 1369 in In-Ear Headphones | #961 of 1369 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Connection | Wired | Wired |
| Driver Type | Planar | Tribrid |
| Drivers | 1 x 14.2mm planar magnetic | 10 drivers (2 dynamic drivers + 4 balanced armatures + 4 micro planar drivers) |
| Impedance | 16.5 ohms | 18 ohms |
| Sensitivity | 96 dB/mW | 115 dB |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 10Hz - 40kHz |
| Harman Preference Score | 65 (median of 16 squig.link measurements, calibrated to AutoEQ) | 65 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.36 dB standard deviation | 2.39 dB standard deviation |
| Tonal Tilt | -1.02 (negative is warmer, positive brighter) | -1.03 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the ARTTI T10 Pro from aftersound, atechreviews, audioamigo, banzai1122, boizoff, enemyspider, flare, jaytiss, koi, practiphile, pw, sl0the, soundcheck39, soundignity, tdl, tonedeafmonk and vortexreviews; the Sound Rhyme SR10 from atechreviews, flare and sl0the, all via squig.link.
Related Headphone Comparisons
How ARTTI T10 Pro compares with other leading options: