Shure Aonic 50 Review: Ranked #133 of 382

Last updated: October 13, 2026

The Shure Aonic 50 ranks #133 out of 382 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Shure

Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Shure Aonic 50 - ranked #133 of 382 Over-Ear Headphones · Editor's rating 3.9/5

#133 Shure Aonic 50 Discontinued eBay

Pros: Measured response gives it a very good Harman preference score of 79 with a 2.57 dB spread. It uses 1 x 50mm dynamic.

Cons: Discontinued, so it is mainly found used. An 8.3 dB peak near 11.9 kHz can make cymbals and sibilance sound sharp. The 4.6 dB bass lift can sound boomy and mask midrange detail.

ReleasedApr 2020 (6 years ago)
BackClosed
ConnectionBluetooth
Deviation From Target2.57 dB standard deviation
Driver TypeDynamic
Drivers1 x 50mm dynamic
Form FactorOver-ear
Frequency Response20Hz - 22kHz
Harman Preference Score79 (measured by oratory1990, via AutoEQ)
Impedance39 ohms
Sensitivity97.5 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.2 dB at 30 Hz)
Tonal Tilt+0.17 (negative is warmer, positive brighter)
Weight0.7 lbs (334 g)
EQ preset to match the Harman target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+5.8 dB0.70
Peak471 Hz+5.1 dB0.74
Peak129 Hz-6.0 dB0.68
Peak5,309 Hz-4.3 dB2.71
Peak2,908 Hz-3.6 dB5.04
High shelf10,000 Hz-1.6 dB0.70
Peak1,894 Hz-1.5 dB3.19
Peak51 Hz-1.3 dB2.33
Peak78 Hz+1.1 dB2.48
Peak3,742 Hz+2.0 dB6.00

Head-to-Head Comparisons

1 comparisons

More Shure headphones →