The Shure Aonic 3 ranks #681 out of 865 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Shure
Prices on this page were last checked October 13, 2026 at 3:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#681 Shure Aonic 3 eBay
Pros: Its tonal tilt of +0.37 sits close to the target, so the overall balance is neither dark nor bright. It uses 1 x balanced armature with an easy 28 ohm load.
Cons: A Harman score of 59 places it in the lower part of the in-ear rankings.
| Released | 2020 (6 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.31 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 22Hz - 19kHz |
| Harman Preference Score | 59 (measured by crinacle, via AutoEQ) |
| Impedance | 28 ohms |
| Sensitivity | 108 dB SPL/mW |
| Tonal Tilt | +0.37 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.8 dB | 0.70 |
| Peak | 70 Hz | -4.6 dB | 0.25 |
| Peak | 5,692 Hz | +5.0 dB | 1.38 |
| Peak | 2,508 Hz | +2.8 dB | 2.23 |
| Peak | 7,366 Hz | -3.6 dB | 5.18 |
| High shelf | 10,000 Hz | +6.6 dB | 0.70 |
| Peak | 897 Hz | +1.3 dB | 1.75 |
| Peak | 9,052 Hz | -2.5 dB | 1.98 |
| Peak | 1,346 Hz | -1.4 dB | 3.28 |
| Peak | 357 Hz | -0.6 dB | 2.24 |
- Reviews, Comparisons and Sound Samples
Head-to-Head Comparisons
2 comparisonsNo comparisons match that search.