The Pula Anvil114 ranks #679 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Pula
Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#679 Pula Anvil114: $189 eBay
Same family: the Pula PA02 (lower-end model, ranked higher, rated 3.9/5) and the Pula Unicrom (higher-end model, ranked higher, rated 3.8/5).
Pros: A broadly balanced tuning with a preference score of 70 against the Harman target.
Cons: An uneven response, 2.2 dB standard deviation from target.
Is the Pula Anvil114 right for you?
Buy it if
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 18 points.
Skip it if
- you want the best value: the higher-rated EPZ G10 costs about $165 less.
| Back | Closed |
|---|---|
| Connection | Wired (3.5mm / 4.4mm) |
| Deviation From Target | 2.18 dB standard deviation |
| Driver Type | Tribrid |
| Drivers | 1 Dynamic, 4 Balanced Armature, 1 Bone Conduction |
| Form Factor | In-ear |
| Harman Preference Score | 70 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.2 dB at 30 Hz) |
| Tonal Tilt | -0.36 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 70.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 194 Hz | -4.5 dB | 0.68 |
| Peak | 3,654 Hz | +2.5 dB | 0.75 |
| Peak | 7,853 Hz | -2.0 dB | 6.00 |
Neutral target
Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 40.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.3 dB | 0.70 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 178 Hz | -4.4 dB | 0.58 |
| Peak | 3,654 Hz | +2.5 dB | 0.73 |
| Peak | 7,846 Hz | -2.0 dB | 6.00 |
Studio flat target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 93 out of 100, up from 20.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.9 dB | 0.70 |
| High shelf | 10,000 Hz | +0.9 dB | 0.70 |
| Peak | 186 Hz | -6.3 dB | 0.65 |
| Peak | 423 Hz | -0.8 dB | 2.25 |
| Peak | 2,593 Hz | +4.2 dB | 1.19 |
| Peak | 3,979 Hz | +1.9 dB | 5.76 |
| Peak | 5,294 Hz | -1.7 dB | 6.00 |
| Peak | 7,716 Hz | -1.7 dB | 6.00 |
Warm target
Set a preamp of -2.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 77.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.4 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 187 Hz | -4.2 dB | 0.67 |
| Peak | 3,936 Hz | +2.2 dB | 5.12 |
| Peak | 7,623 Hz | -3.8 dB | 6.00 |
Bass target
Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 66.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.0 dB | 0.70 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 194 Hz | -4.5 dB | 0.68 |
| Peak | 3,654 Hz | +2.5 dB | 0.75 |
| Peak | 7,853 Hz | -2.0 dB | 6.00 |
Bright target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 29.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.4 dB | 0.70 |
| High shelf | 10,000 Hz | -1.7 dB | 0.70 |
| Peak | 184 Hz | -4.4 dB | 0.55 |
| Peak | 2,054 Hz | +1.5 dB | 4.73 |
| Peak | 3,990 Hz | +2.1 dB | 6.00 |
| Peak | 5,345 Hz | +4.4 dB | 0.67 |
| Peak | 7,076 Hz | -1.8 dB | 4.02 |
V-shaped target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 90 out of 100, up from 65.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.6 dB | 0.70 |
| High shelf | 10,000 Hz | -0.5 dB | 0.70 |
| Peak | 23 Hz | +1.5 dB | 1.23 |
| Peak | 200 Hz | -3.0 dB | 0.58 |
| Peak | 2,096 Hz | +1.7 dB | 5.52 |
| Peak | 3,997 Hz | +2.1 dB | 4.45 |
| Peak | 5,345 Hz | +4.8 dB | 0.62 |
| Peak | 6,990 Hz | -2.7 dB | 5.99 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Pula Anvil114 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 10 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 10 measurements from the squig.link databases of atechreviews, boizoff, elrics, iemocean, jaytiss, sl0the, soundcheck39, soundignity, superreview and tonedeafmonk. Thanks to each of them for publishing their work.