The Lypertek Tevi ranks #301 out of 1490 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#301 Lypertek Tevi: $89.90 Wireless eBay
Pros: Wireless earbuds with a preference score of 77, full bass to 20 Hz and a midrange within 0.5 dB of target. Battery life is a long 10 hours per charge (70 with the case), they support aptX and are rated IPX7.
Cons: Presence sits 2.5 dB low with a 5.6 dB dip near 4.6 kHz, so vocals can sound distant. There is no active noise cancelling, it is sold out after listing at $90, and the score rests on a single measurement.
Is the Lypertek Tevi right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
- your taste runs warm: it scores 82 for that sound.
- you are sensitive to bright or sharp treble (treble sits 2.3 dB below target).
- you want sub-bass rumble that reaches down to 20 Hz.
Skip it if
- you want the best value: the higher-rated QCY HT05 MeloBuds ANC costs about $56 less.
| Released | 2020 (6 years ago) |
|---|---|
| Active Noise Cancelling | No |
| Back | Closed |
| Battery Life | 10 hours; 70 hours with case |
| Bluetooth Codecs | SBC, AAC, aptX |
| Bluetooth Version | 5.0 |
| Connection | Wireless |
| Deviation From Target | 1.78 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 6mm graphene dynamic per earbud |
| Form Factor | In-ear |
| Harman Preference Score | 77 (1 squig.link measurement, calibrated to AutoEQ) |
| IP Rating | IPX7 |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz) |
| Tonal Tilt | -0.39 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 77.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| High shelf | 10,000 Hz | -2.4 dB | 0.70 |
| Peak | 105 Hz | +1.1 dB | 1.20 |
| Peak | 160 Hz | -2.1 dB | 1.22 |
| Peak | 220 Hz | -1.1 dB | 2.51 |
| Peak | 4,654 Hz | +6.0 dB | 2.03 |
Neutral target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 42.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.6 dB | 0.70 |
| High shelf | 10,000 Hz | -2.4 dB | 0.70 |
| Peak | 23 Hz | -2.3 dB | 2.74 |
| Peak | 117 Hz | +1.7 dB | 5.51 |
| Peak | 160 Hz | -2.0 dB | 0.96 |
| Peak | 220 Hz | -0.9 dB | 1.50 |
| Peak | 4,654 Hz | +6.0 dB | 2.03 |
Studio flat target
Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 24.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.8 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 105 Hz | +1.3 dB | 2.21 |
| Peak | 160 Hz | -3.9 dB | 0.87 |
| Peak | 220 Hz | -1.1 dB | 1.02 |
| Peak | 3,930 Hz | +4.7 dB | 1.31 |
Warm target
Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 82.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 50 Hz | +1.2 dB | 3.49 |
| Peak | 105 Hz | +1.0 dB | 0.94 |
| Peak | 160 Hz | -1.9 dB | 1.57 |
| Peak | 220 Hz | -1.2 dB | 2.81 |
| Peak | 2,581 Hz | -1.8 dB | 3.91 |
| Peak | 4,570 Hz | +4.2 dB | 3.22 |
| Peak | 7,430 Hz | -2.0 dB | 5.74 |
Bass target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 72.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.7 dB | 0.70 |
| High shelf | 10,000 Hz | -2.4 dB | 0.70 |
| Peak | 50 Hz | +1.3 dB | 3.29 |
| Peak | 105 Hz | +1.1 dB | 0.98 |
| Peak | 160 Hz | -2.1 dB | 1.39 |
| Peak | 220 Hz | -1.2 dB | 2.55 |
| Peak | 4,655 Hz | +6.0 dB | 2.03 |
Bright target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 90 out of 100, up from 31.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.6 dB | 0.70 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 23 Hz | -2.3 dB | 2.70 |
| Peak | 55 Hz | +0.9 dB | 1.49 |
| Peak | 117 Hz | +1.7 dB | 5.30 |
| Peak | 160 Hz | -2.0 dB | 0.88 |
| Peak | 220 Hz | -0.9 dB | 1.45 |
| Peak | 2,642 Hz | -1.7 dB | 3.71 |
| Peak | 4,321 Hz | +6.0 dB | 1.41 |
| Peak | 5,753 Hz | +2.9 dB | 6.00 |
V-shaped target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 68.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.4 dB | 0.70 |
| High shelf | 10,000 Hz | +1.0 dB | 0.70 |
| Peak | 4,321 Hz | +6.0 dB | 1.29 |
- Links
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Lypertek Tevi measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: a single measurement from the squig.link database of aftersound. Thanks to them for publishing their work.