Kinera Imperial Loki Review: Ranked #635 of 1084

Last updated: October 15, 2026

The Kinera Imperial Loki ranks #635 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Kinera

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#635 Kinera Imperial Loki: $3,099.00 Kinera official store $3,099.00 eBay

Pros: A twelve driver flagship with a dynamic driver, six balanced armatures, four electrostatic tweeters and a bone conduction driver. Measurements show full sub-bass to 20 Hz (score 68 across four measurements).

Cons: Treble sits about 2.7 dB below target, a dark, relaxed balance. Very expensive for its rating.

Is the Kinera Imperial Loki right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.7 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $3,075 less.
Released2023 (3 years ago)
BackClosed
ConnectionWired
Deviation From Target2.09 dB standard deviation
Driver TypeQuadbrid
Drivers1 x dynamic + 6 x balanced armature + 4 x electrostatic + 1 x bone conduction
Form FactorIn-ear
Harman Preference Score68 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance12 ohms
Sensitivity107 dB @ 1kHz
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz)
Tonal Tilt-0.64 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-1.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak140 Hz-1.5 dB1.07
Peak608 Hz+2.5 dB1.86
Peak1,227 Hz-1.3 dB4.91
Peak1,567 Hz-3.4 dB3.29
Peak2,725 Hz+2.1 dB6.00
Peak4,928 Hz+5.2 dB1.35

Neutral target

Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-9.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak127 Hz-1.5 dB0.76
Peak607 Hz+2.5 dB1.85
Peak1,228 Hz-1.3 dB5.04
Peak1,567 Hz-3.4 dB3.30
Peak2,725 Hz+2.1 dB6.00
Peak4,927 Hz+5.2 dB1.35

Studio flat target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 13.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz-0.4 dB0.70
Peak141 Hz-3.3 dB0.92
Peak628 Hz+2.3 dB2.01
Peak1,581 Hz-3.4 dB2.88
Peak2,954 Hz+5.3 dB1.80
Peak5,102 Hz+2.9 dB2.82
Peak7,471 Hz+1.6 dB4.86

Warm target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz-0.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak604 Hz+2.8 dB1.67
Peak1,608 Hz-3.6 dB3.29
Peak2,747 Hz+1.7 dB6.00
Peak4,883 Hz+3.3 dB2.18

Bass target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+2.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak147 Hz-1.5 dB1.21
Peak607 Hz+2.5 dB1.85
Peak1,226 Hz-1.3 dB4.87
Peak1,567 Hz-3.4 dB3.29
Peak2,725 Hz+2.1 dB6.00
Peak4,928 Hz+5.2 dB1.35

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-9.7 dB0.70
High shelf10,000 Hz-3.2 dB0.70
Peak127 Hz-1.5 dB0.75
Peak602 Hz+2.4 dB2.01
Peak1,558 Hz-3.6 dB3.34
Peak1,927 Hz-1.4 dB5.14
Peak2,954 Hz+2.1 dB2.80
Peak5,345 Hz+6.0 dB1.05

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
High shelf10,000 Hz-1.5 dB0.70
Peak490 Hz+2.6 dB1.34
Peak1,157 Hz-1.5 dB5.72
Peak1,508 Hz-3.6 dB3.34
Peak1,871 Hz-1.6 dB4.19
Peak2,954 Hz+2.3 dB2.42
Peak5,345 Hz+6.0 dB0.93
Peak6,759 Hz-2.9 dB6.00

Frequency Response

How the Kinera Imperial Loki measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Kinera Imperial LokiHarman target
Measured frequency response of the Kinera Imperial Loki-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of mmagtech, silicagel, soundignity and tonedeafmonk. Thanks to each of them for publishing their work.

More Kinera headphones →