Kinera Celest Yaksha Review: Ranked #598 of 1061

Last updated: October 15, 2026

The Kinera Celest Yaksha ranks #598 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Kinera

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#598 Kinera Celest Yaksha: $139.00 Amazon $139.00 eBay

Pros: A four driver hybrid with two dynamic drivers, a Knowles balanced armature and a micro planar. Measurements show full sub-bass to 20 Hz (score 69 across ten measurements).

Cons: Treble sits about 3.0 dB below target, a dark, relaxed balance.

Is the Kinera Celest Yaksha right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 3.0 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 19 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $115 less.
BackClosed
ConnectionWired
Deviation From Target2.18 dB standard deviation
Driver TypeHybrid
Drivers2 x dynamic + 1 x balanced armature + 1 x micro planar
Form FactorIn-ear
Harman Preference Score69 (median of 10 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.0 dB at 30 Hz)
Tonal Tilt-0.71 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak174 Hz-3.1 dB0.81
Peak4,905 Hz+5.1 dB1.60

Neutral target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 33.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak174 Hz-3.0 dB0.68
Peak4,905 Hz+5.1 dB1.59

Studio flat target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.6 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak172 Hz-4.8 dB0.72
Peak4,138 Hz+4.0 dB0.92

Warm target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 80.

FilterFrequencyGainQ
High shelf10,000 Hz-1.2 dB0.70
Peak174 Hz-2.9 dB0.79
Peak4,905 Hz+3.0 dB2.09
Peak6,062 Hz+1.8 dB6.00
Peak7,872 Hz-2.4 dB6.00

Bass target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak174 Hz-3.0 dB0.85
Peak4,905 Hz+5.1 dB1.60

Bright target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 21.

FilterFrequencyGainQ
Low shelf105 Hz-9.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak174 Hz-3.0 dB0.68
Peak684 Hz+1.1 dB1.81
Peak1,511 Hz-1.3 dB4.00
Peak4,604 Hz+6.0 dB1.45
Peak5,752 Hz+1.8 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 75 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak4,604 Hz+6.0 dB1.29

Frequency Response

How the Kinera Celest Yaksha measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 10 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Kinera Celest YakshaHarman target
Measured frequency response of the Kinera Celest Yaksha-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 10 measurements from the squig.link databases of arn, atechreviews, audioamigo, dl, gadgetgenerations, hbb, jaytiss, pw, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.

More Kinera headphones →