KZ ZSX Pro Review: Ranked #544 of 1476

Last updated: October 21, 2026

The KZ ZSX Pro ranks #544 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KZ

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#544 KZ ZSX Pro: $58.99 Amazon $58.99 eBay

Pros: A hybrid IEM with one dynamic and five balanced armatures at about $59, with a preference score of 73. Everything up to 8 kHz stays within about 2 dB of target, so mids are clean and natural.

Cons: A 13.2 dB peak near 8.2 kHz and a 6.8 dB peak near 10.9 kHz make it bright and prone to sibilance. Bass is 1.7 to 1.8 dB light, and the score rests on a single measurement.

Is the KZ ZSX Pro right for you?

Buy it if

  • you are happy to use EQ: our preset lifts its Harman match by about 15 points.

Skip it if

BackClosed
ConnectionWired
Deviation From Target2.20 dB standard deviation
Driver TypeHybrid (dynamic + balanced armature)
Drivers1 x dynamic + 5 x balanced armature
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score73 (1 squig.link measurement, calibrated to AutoEQ)
Impedance19 ohms
Sensitivity103 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.7 dB at 30 Hz)
Tonal Tilt+0.55 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+1.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak229 Hz-1.2 dB1.47
Peak3,013 Hz-2.8 dB6.00
Peak4,041 Hz+1.9 dB6.00
Peak5,868 Hz+4.9 dB6.00
Peak7,728 Hz-5.0 dB6.00

Neutral target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 57.

FilterFrequencyGainQ
Low shelf105 Hz-6.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-1.0 dB2.11
Peak205 Hz-1.1 dB1.00
Peak3,013 Hz-2.8 dB6.00
Peak4,041 Hz+1.9 dB6.00
Peak5,867 Hz+4.9 dB6.00
Peak7,728 Hz-5.0 dB6.00

Studio flat target

Set a preamp of -2.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 42.

FilterFrequencyGainQ
Low shelf105 Hz-9.4 dB0.70
Peak199 Hz-2.9 dB0.87
Peak2,320 Hz+2.3 dB3.88
Peak5,929 Hz+2.6 dB6.00
Peak7,604 Hz-5.9 dB6.00

Warm target

Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 86 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+2.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak226 Hz-0.9 dB1.93
Peak3,006 Hz-4.0 dB3.48
Peak5,937 Hz+2.4 dB6.00
Peak7,577 Hz-9.0 dB6.00

Bass target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 57.

FilterFrequencyGainQ
Low shelf105 Hz+5.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak48 Hz+0.7 dB1.58
Peak233 Hz-1.2 dB1.60
Peak3,013 Hz-2.8 dB6.00
Peak4,041 Hz+1.9 dB6.00
Peak5,868 Hz+4.9 dB6.00
Peak7,727 Hz-5.0 dB6.00

Bright target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 51.

FilterFrequencyGainQ
Low shelf105 Hz-6.8 dB0.70
High shelf10,000 Hz-2.5 dB0.70
Peak23 Hz-1.0 dB2.00
Peak202 Hz-1.1 dB0.92
Peak3,025 Hz-2.3 dB6.00
Peak4,060 Hz+2.7 dB6.00
Peak5,542 Hz+6.0 dB3.17
Peak7,751 Hz-3.3 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 87 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+5.9 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak101 Hz+0.8 dB0.55
Peak1,259 Hz-1.0 dB4.60
Peak3,060 Hz-1.8 dB6.00
Peak3,998 Hz+2.1 dB6.00
Peak5,345 Hz+5.6 dB2.24
Peak7,757 Hz-2.7 dB6.00

Frequency Response

How the KZ ZSX Pro measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KZ ZSX ProHarman target
Measured frequency response of the KZ ZSX Pro-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of boizoff. Thanks to them for publishing their work.

More KZ headphones →