KBEAR Mirage KB08 Review: Ranked #440 of 1476

Last updated: October 21, 2026

The KBEAR Mirage KB08 ranks #440 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KBEAR

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#440 KBEAR Mirage KB08: $149.00 Amazon $149.00 eBay

Pros: A tribrid IEM at about $149 with a 10 mm beryllium coated dynamic, a balanced armature and two micro planar tweeters, and a preference score of 75. Bass is on target down to 20 Hz with a slight lift, and the lower mids are neutral.

Cons: Presence is 2.6 dB low with a 5.0 dB dip near 4.1 kHz, and treble falls 5.5 dB near 10 kHz, so vocals can sound a step back and the top end slightly dull. KBEAR does not publish impedance or sensitivity, and the score rests on a single measurement.

Is the KBEAR Mirage KB08 right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 75).
  • your taste runs warm: it scores 83 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.6 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

BackClosed
ConnectionWired
Deviation From Target1.88 dB standard deviation
Driver TypeTribrid (dynamic + balanced armature + micro planar)
Drivers1 x 10mm dynamic + 1 x balanced armature + 2 x micro planar
Form FactorIn-ear
Harman Preference Score75 (1 squig.link measurement, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.4 dB at 30 Hz)
Tonal Tilt-0.65 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak181 Hz-2.1 dB0.93
Peak3,980 Hz+5.4 dB2.23
Peak6,719 Hz-1.6 dB6.00

Neutral target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 87 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-9.2 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak174 Hz-2.0 dB0.69
Peak3,980 Hz+5.4 dB2.23
Peak6,719 Hz-1.6 dB6.00

Studio flat target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 84 out of 100, up from 15.

FilterFrequencyGainQ
Low shelf105 Hz-11.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak176 Hz-3.8 dB0.71
Peak3,382 Hz+5.6 dB1.85
Peak4,269 Hz+1.2 dB6.00
Peak6,526 Hz-2.8 dB6.00

Warm target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 83.

FilterFrequencyGainQ
Low shelf105 Hz-0.4 dB0.70
High shelf10,000 Hz-4.2 dB0.70
Peak174 Hz-1.9 dB1.01
Peak3,911 Hz+3.8 dB3.87
Peak6,798 Hz-3.6 dB4.77

Bass target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+3.1 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak186 Hz-2.1 dB1.01
Peak3,980 Hz+5.4 dB2.23
Peak6,719 Hz-1.6 dB6.00

Bright target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak174 Hz-2.0 dB0.67
Peak2,201 Hz-0.7 dB1.51
Peak3,502 Hz+1.1 dB6.00
Peak4,321 Hz+6.0 dB1.30
Peak5,509 Hz+1.2 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak1,437 Hz-1.0 dB1.39
Peak4,056 Hz+6.0 dB1.17
Peak5,529 Hz+2.5 dB6.00

Frequency Response

How the KBEAR Mirage KB08 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KBEAR Mirage KB08Harman target
Measured frequency response of the KBEAR Mirage KB08-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of eplv. Thanks to them for publishing their work.

More KBEAR headphones →