The Juzear Flame ranks #287 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Juzear
Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#287 Juzear Flame: $152.10 HiFiGo $152.10 eBay
Pros: A 1DD plus 4BA hybrid IEM at about $152 with a preference score of 77. Sub bass extends fully to 20 Hz and the midrange stays within about 1 dB of target, so the tuning sounds even and uncolored.
Cons: Treble runs 3 to 4 dB low above 5 kHz with a 6.3 dB dip near 5.9 kHz, and upper bass is 2.6 dB light, so it sounds a little lean and soft on top. The score rests on a single measurement.
Is the Juzear Flame right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
- you are sensitive to bright or sharp treble (treble sits 3.3 dB below target).
Skip it if
- you want the best value: the higher-rated QCY HT05 MeloBuds ANC costs about $118 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.69 dB standard deviation |
| Driver Type | Hybrid (dynamic + balanced armature) |
| Drivers | 1 x dynamic + 4 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 77 (1 squig.link measurement, calibrated to AutoEQ) |
| Impedance | 48 ohms |
| Sensitivity | 112 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.5 dB at 30 Hz) |
| Tonal Tilt | -0.14 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 89 out of 100, up from 77.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.7 dB | 0.70 |
| High shelf | 10,000 Hz | -3.7 dB | 0.70 |
| Peak | 23 Hz | -1.6 dB | 2.39 |
| Peak | 113 Hz | +2.9 dB | 1.30 |
| Peak | 3,302 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.1 dB | 0.67 |
Neutral target
Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 50.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.9 dB | 0.70 |
| High shelf | 10,000 Hz | -3.7 dB | 0.70 |
| Peak | 23 Hz | -2.0 dB | 1.89 |
| Peak | 119 Hz | +2.8 dB | 1.47 |
| Peak | 3,302 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.1 dB | 0.67 |
Studio flat target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 31.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.4 dB | 0.70 |
| High shelf | 10,000 Hz | +0.9 dB | 0.70 |
| Peak | 23 Hz | -2.5 dB | 1.99 |
| Peak | 88 Hz | +1.9 dB | 1.48 |
| Peak | 383 Hz | -1.9 dB | 1.18 |
| Peak | 3,227 Hz | +5.4 dB | 1.27 |
| Peak | 4,578 Hz | -1.9 dB | 4.90 |
| Peak | 5,916 Hz | +3.3 dB | 6.00 |
Warm target
Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 80.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.9 dB | 0.70 |
| High shelf | 10,000 Hz | -5.8 dB | 0.70 |
| Peak | 116 Hz | +3.1 dB | 1.20 |
| Peak | 5,345 Hz | +2.2 dB | 0.78 |
Bass target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 65.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.4 dB | 0.70 |
| High shelf | 10,000 Hz | -3.7 dB | 0.70 |
| Peak | 110 Hz | +3.0 dB | 1.21 |
| Peak | 3,302 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.1 dB | 0.67 |
Bright target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 37.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.9 dB | 0.70 |
| High shelf | 10,000 Hz | -1.4 dB | 0.70 |
| Peak | 23 Hz | -2.1 dB | 1.85 |
| Peak | 119 Hz | +2.8 dB | 1.52 |
| Peak | 906 Hz | -0.7 dB | 0.48 |
| Peak | 3,398 Hz | +2.6 dB | 4.76 |
| Peak | 5,345 Hz | +5.4 dB | 0.70 |
| Peak | 6,945 Hz | -2.9 dB | 6.00 |
V-shaped target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 60.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.7 dB | 0.70 |
| High shelf | 10,000 Hz | -0.6 dB | 0.70 |
| Peak | 132 Hz | +4.0 dB | 1.14 |
| Peak | 949 Hz | -1.4 dB | 1.51 |
| Peak | 3,347 Hz | +2.5 dB | 3.91 |
| Peak | 5,345 Hz | +5.5 dB | 0.63 |
| Peak | 6,982 Hz | -3.4 dB | 5.68 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Juzear Flame measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: a single measurement from the squig.link database of melatonin. Thanks to them for publishing their work.