Artpical Lunar Ring Review: Ranked #241 of 1476

Last updated: October 21, 2026

The Artpical Lunar Ring ranks #241 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Artpical

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Artpical Lunar Ring - ranked #241 of 1476 In-Ear Headphones · Editor's rating 4.3/5

#241 Artpical Lunar Ring: $500 eBay

Pros: An 8 mm dynamic, one balanced armature and two micro planar IEM with a preference score of 78 and a near neutral tilt across two measurements. Bass is full to 20 Hz and the midrange stays within 1 dB of target.

Cons: A 4.4 dB peak near 11.2 kHz adds some edge to the top treble. It launched in Japan at about $500 and has no US retailer, so buying one means importing it.

Is the Artpical Lunar Ring right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

ReleasedAug 2026 (2 months ago)
BackClosed
ConnectionWired
Deviation From Target1.64 dB standard deviation
Driver TypeHybrid (dynamic + balanced armature + micro planar)
Drivers1 x 8mm dynamic + 1 x Knowles balanced armature + 2 x micro planar
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score78 (average of 2 squig.link measurements scored separately, calibrated to AutoEQ)
Impedance12.2 ohms
Sensitivity108.5 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.1 dB at 30 Hz)
Tonal Tilt-0.01 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+0.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.4 dB2.11
Peak123 Hz-3.4 dB0.92
Peak521 Hz+1.5 dB2.44
Peak2,201 Hz-1.0 dB1.58
Peak3,984 Hz+2.8 dB4.80

Neutral target

Set a preamp of -2.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 47.

FilterFrequencyGainQ
Low shelf105 Hz-7.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.0 dB2.46
Peak116 Hz-3.5 dB0.85
Peak519 Hz+1.5 dB2.36
Peak2,201 Hz-1.0 dB1.58
Peak3,984 Hz+2.8 dB4.78

Studio flat target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-10.5 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak141 Hz-5.0 dB0.82
Peak3,293 Hz+2.9 dB2.87
Peak5,423 Hz-2.9 dB5.84

Warm target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+0.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.4 dB2.13
Peak120 Hz-3.2 dB0.97
Peak537 Hz+1.7 dB1.91
Peak2,230 Hz-1.1 dB1.75
Peak3,957 Hz+2.6 dB6.00
Peak5,932 Hz-1.6 dB0.40

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+4.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak24 Hz+2.0 dB1.66
Peak130 Hz-3.3 dB1.00
Peak522 Hz+1.5 dB2.48
Peak2,201 Hz-1.0 dB1.57
Peak3,984 Hz+2.8 dB4.81

Bright target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-7.9 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak116 Hz-3.6 dB0.82
Peak520 Hz+1.5 dB2.23
Peak2,201 Hz-1.3 dB1.89
Peak4,604 Hz+4.1 dB1.48
Peak7,651 Hz+1.8 dB4.09

V-shaped target

Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the average of 2 independent measurements from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+4.8 dB0.70
High shelf10,000 Hz-1.9 dB0.70
Peak111 Hz-2.2 dB1.28
Peak4,601 Hz+4.6 dB1.39

Frequency Response

How the Artpical Lunar Ring measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the average of 2 independent measurements, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Artpical Lunar RingHarman target
Measured frequency response of the Artpical Lunar Ring-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: the average of 2 independent measurements from the squig.link databases of aftersound and hu-fi. Thanks to each of them for publishing their work.

More Artpical headphones →