The ARTTI R3 ranks #507 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: ARTTI
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#507 ARTTI R3: $24.99 Amazon $24.99 eBay
Pros: A very cheap single dynamic IEM. Measurements show full sub-bass to 20 Hz (score 71 across four measurements).
Cons: A 1.89 dB spread from the target still leaves some peaks and dips.
Is the ARTTI R3 right for you?
Buy it if
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 19 points.
Skip it if
- you want the best value: the higher-rated TRN MT3 costs about $7 less.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.89 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 71 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.6 dB at 30 Hz) |
| Tonal Tilt | -0.66 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 71.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.7 dB | 0.70 |
| High shelf | 10,000 Hz | +1.3 dB | 0.70 |
| Peak | 168 Hz | -3.4 dB | 0.95 |
| Peak | 633 Hz | +1.6 dB | 2.61 |
| Peak | 2,061 Hz | -1.8 dB | 2.75 |
| Peak | 3,373 Hz | +1.9 dB | 6.00 |
| Peak | 5,868 Hz | +5.7 dB | 5.90 |
Neutral target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 33.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.2 dB | 0.70 |
| High shelf | 10,000 Hz | +1.3 dB | 0.70 |
| Peak | 154 Hz | -3.3 dB | 0.78 |
| Peak | 630 Hz | +1.6 dB | 2.51 |
| Peak | 2,065 Hz | -1.8 dB | 2.79 |
| Peak | 3,372 Hz | +1.9 dB | 6.00 |
| Peak | 5,868 Hz | +5.7 dB | 5.89 |
Studio flat target
Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 15.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.9 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 161 Hz | -5.3 dB | 0.77 |
| Peak | 633 Hz | +1.5 dB | 3.89 |
| Peak | 1,820 Hz | -1.3 dB | 2.53 |
| Peak | 3,132 Hz | +2.9 dB | 5.11 |
| Peak | 4,590 Hz | -3.0 dB | 6.00 |
| Peak | 5,800 Hz | +1.5 dB | 0.40 |
Warm target
Set a preamp of -1.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 78.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.4 dB | 0.70 |
| High shelf | 10,000 Hz | -1.9 dB | 0.70 |
| Peak | 163 Hz | -3.2 dB | 0.98 |
| Peak | 642 Hz | +1.9 dB | 2.32 |
| Peak | 2,071 Hz | -1.9 dB | 3.30 |
| Peak | 3,290 Hz | +1.8 dB | 6.00 |
| Peak | 4,148 Hz | -1.1 dB | 0.42 |
| Peak | 6,065 Hz | +2.9 dB | 6.00 |
Bass target
Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 78.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.1 dB | 0.70 |
| High shelf | 10,000 Hz | +1.3 dB | 0.70 |
| Peak | 171 Hz | -3.4 dB | 1.00 |
| Peak | 634 Hz | +1.6 dB | 2.65 |
| Peak | 2,059 Hz | -1.8 dB | 2.73 |
| Peak | 3,373 Hz | +1.9 dB | 6.00 |
| Peak | 5,868 Hz | +5.7 dB | 5.91 |
Bright target
Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 87 out of 100, up from 22.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.2 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 154 Hz | -3.3 dB | 0.77 |
| Peak | 628 Hz | +1.6 dB | 2.58 |
| Peak | 2,021 Hz | -1.8 dB | 2.71 |
| Peak | 3,388 Hz | +2.6 dB | 5.96 |
| Peak | 5,476 Hz | +5.3 dB | 2.08 |
V-shaped target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 69.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.8 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 157 Hz | -2.1 dB | 1.15 |
| Peak | 581 Hz | +1.5 dB | 2.58 |
| Peak | 1,939 Hz | -1.5 dB | 2.01 |
| Peak | 3,296 Hz | +2.3 dB | 6.00 |
| Peak | 5,209 Hz | +4.9 dB | 1.43 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the ARTTI R3 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 4 measurements from the squig.link databases of ankramutt, audioamigo, riz and tonedeafmonk. Thanks to each of them for publishing their work.