Short answer: a tie on sound quality. Both are rated 3.8/5 (#600 and #580 of 1291 in-ear headphones) at nearly the same price ($24.99 vs $25.73), so choose on features and fit.
The case for the ARTTI R3: A very cheap single dynamic in-ear with a 71 Harman preference score and full sub-bass extension down to 20 Hz. Watch for: A 1.89 dB spread from the target still leaves some peaks and dips.
Why pick the NiceHCK Tears: The median of 14 hobbyist measurements gives it a solid Harman preference score of 71 with a 2.04 dB spread, and its mids sit within about 0.5 dB of target, so vocals and instruments sound natural. The tradeoff: Presence sits about 4.2 dB low with a 6.4 dB dip near 10.3 kHz, so vocals and instruments lose some bite.
Buy the ARTTI R3 or the NiceHCK Tears on features: they are rated the same for sound quality at close to the same price.
Looking for alternatives? See the complete Headphones rankings.
A very cheap single dynamic in-ear with a 71 Harman preference score and full sub-bass extension down to 20 Hz.
Amazon $24.99 eBay
The median of 14 hobbyist measurements gives it a solid Harman preference score of 71 with a 2.04 dB spread, and its mids sit within about 0.5 dB of target, so vocals and instruments sound natural.
Amazon $25.73 eBayPrices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| ARTTI R3 | NiceHCK Tears | |
|---|---|---|
| Price | $24.99 | $25.73 |
| Ranked | #600 of 1291 in In-Ear Headphones | #580 of 1291 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Harman Preference Score | 71 (median of 4 squig.link measurements, calibrated to AutoEQ) | 71 (median of 14 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.89 dB standard deviation | 2.04 dB standard deviation |
| Tonal Tilt | -0.66 (negative is warmer, positive brighter) | -0.71 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.6 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.0 dB at 30 Hz) |
| Impedance | - | 20 ohms |
| Frequency Response | - | 20Hz - 20kHz (Manufacturer specified) |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the ARTTI R3 from ankramutt, audioamigo, riz and tonedeafmonk; the NiceHCK Tears from aftersound, atechreviews, audioamigo, avishai, bassaudio, eplv, hu-fi, lestat, practiphile, pw, samreviews, silicagel, soundcheck39 and soundignity, all via squig.link.
Related Headphone Comparisons
How NiceHCK Tears compares with other leading options: