Coverage note. Speaker Ranking currently covers 3 ARTTI models across headphones. These are the products in our database, not a complete list of everything ARTTI makes.
What this page covers. The ARTTI models ranked here span headphones, including ARTTI T10, ARTTI R1 and ARTTI T10 Pro. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 3 ARTTI speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
In-Ear Headphones
Ranked #253 of 657 in In-Ear Headphones - ARTTI T10: $72.00 Amazon $72.00 eBay
Pros: The median of 23 hobbyist measurements gives it a very good Harman preference score of 75 with a 1.75 dB spread, and its mids sit within about 1 dB of target, so vocals and instruments sound natural. Upper treble lifts about 3.6 dB for extra air and sparkle. It uses 1 x 14.2mm planar magnetic.
Cons: Presence sits about 3 dB low with a 4.3 dB dip near 3.5 kHz, so vocals and instruments lose some bite. A 5 dB peak near 8.2 kHz can make cymbals and sibilance sound sharp.
Full ARTTI T10 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.75 dB standard deviation |
| Driver Type | Planar magnetic |
| Drivers | 1 x 14.2mm planar magnetic |
| Form Factor | In-ear |
| Harman Preference Score | 75 (median of 23 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.7 dB at 30 Hz) |
| Tonal Tilt | -0.45 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #427 of 657 in In-Ear Headphones - ARTTI R1 eBay
Pros: The median of 14 hobbyist measurements gives it a solid Harman preference score of 70 with a 1.93 dB spread, and its mids sit within about 0.7 dB of target, so vocals and instruments sound natural. Bass is lifted about 3.6 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. It uses 2 x 6mm dynamic + 1 x 8mm dynamic with an easy 20.4 ohm load.
Cons: Its 1.93 dB spread is less even than the best measured sets.
Full ARTTI R1 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.93 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 2 x 6mm dynamic + 1 x 8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 70 (median of 14 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 20.4 ohms |
| Sensitivity | 102 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.6 dB at 30 Hz) |
| Tonal Tilt | -0.78 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
Ranked #513 of 657 in In-Ear Headphones - ARTTI T10 Pro: $109.00 Amazon $109.00 eBay
Pros: Bass is lifted about 3 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. Upper treble lifts about 4.9 dB for extra air and sparkle. Lower mids sit within about 0.6 dB of target, keeping voices and guitars natural. It uses 1 x 14.2mm planar magnetic with an easy 16.5 ohm load.
Cons: Presence sits about 4 dB low with a 4.9 dB dip near 6.3 kHz, so vocals and instruments lose some bite.
Full ARTTI T10 Pro review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.36 dB standard deviation |
| Driver Type | Planar |
| Drivers | 1 x 14.2mm planar magnetic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 65 (median of 16 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16.5 ohms |
| Sensitivity | 96 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) |
| Tonal Tilt | -1.02 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples