The ARTTI R6 ranks #423 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: ARTTI
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#423 ARTTI R6 eBay
Pros: A very cheap single dynamic IEM. It measures reasonably close to the Harman target (score 73 across seven measurements).
Cons: No current new listing was found, so it is mainly found used. Treble sits about 3.7 dB below target, a dark, relaxed balance. Sub-bass falls about 3.0 dB short at 30 Hz.
Is the ARTTI R6 right for you?
Buy it if
- you are sensitive to bright or sharp treble (treble sits 3.7 dB below target).
- you are happy to use EQ: our preset lifts its Harman match by about 14 points.
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.28 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 73 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 112 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.0 dB at 30 Hz) |
| Tonal Tilt | -0.15 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.6 dB | 0.70 |
| High shelf | 10,000 Hz | -2.8 dB | 0.70 |
| Peak | 186 Hz | -1.5 dB | 0.79 |
| Peak | 5,345 Hz | +6.0 dB | 1.65 |
Neutral target
Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 47.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.0 dB | 0.70 |
| High shelf | 10,000 Hz | -2.8 dB | 0.70 |
| Peak | 139 Hz | -1.6 dB | 0.65 |
| Peak | 1,491 Hz | -0.9 dB | 4.37 |
| Peak | 5,345 Hz | +6.0 dB | 1.65 |
Studio flat target
Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 30.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.5 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 174 Hz | -3.4 dB | 0.71 |
| Peak | 2,506 Hz | +2.3 dB | 5.82 |
| Peak | 4,708 Hz | +4.5 dB | 0.83 |
| Peak | 5,566 Hz | +1.6 dB | 6.00 |
| Peak | 8,000 Hz | -0.7 dB | 0.40 |
Warm target
Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 76.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.8 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 186 Hz | -1.3 dB | 0.90 |
| Peak | 5,537 Hz | +6.0 dB | 2.64 |
Bass target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.7 dB | 0.70 |
| High shelf | 10,000 Hz | -2.8 dB | 0.70 |
| Peak | 46 Hz | +0.7 dB | 1.58 |
| Peak | 195 Hz | -1.5 dB | 1.12 |
| Peak | 1,486 Hz | -1.0 dB | 4.20 |
| Peak | 5,345 Hz | +6.0 dB | 1.65 |
Bright target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 75 out of 100, up from 35.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.0 dB | 0.70 |
| High shelf | 10,000 Hz | +1.1 dB | 0.70 |
| Peak | 4,782 Hz | +6.0 dB | 1.35 |
V-shaped target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 77 out of 100, up from 58.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.9 dB | 0.70 |
| High shelf | 10,000 Hz | +1.9 dB | 0.70 |
| Peak | 4,616 Hz | +6.0 dB | 1.22 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the ARTTI R6 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 7 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 7 measurements from the squig.link databases of audioamigo, doltonius, koi, tdl, theaudiostore, tonedeafmonk and treblewellxtended. Thanks to each of them for publishing their work.