Short answer: choose between the Yamaha DXR10mkII and KV2 Audio EX10 for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the Yamaha DXR10mkII. A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.
The case for the KV2 Audio EX10. Medium-quality vendor data gives it a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this ranking. Its 3-inch-diaphragm compression driver and integrated DSP target vocal clarity and controlled throw.
Important trade-offs. It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
Buy the Yamaha DXR10mkII when its stated format, coverage, and system features fit the job better.
Buy the KV2 Audio EX10 when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| Yamaha DXR10mkII | KV2 Audio EX10 | |
|---|---|---|
| Price | $814.99 | $2,900.00 |
| Ranked | #9 of 19 in 10-Inch Two-Way Powered PA Speakers | #11 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" woofer, 1.75" compression driver | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 56Hz - 20kHz (-10dB, manufacturer specified) | 65Hz - 20kHz (-3dB, manufacturer specified) |
| Dimensions | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) |
| Maximum SPL | 132dB peak (manufacturer specified) | - |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs | Balanced female XLR input; male XLR through output |
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) | 500W continuous (450W LF + 50W HF, manufacturer specified) |
| Cabinet Material | Matte-finish ABS | Baltic birch plywood |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount | - |
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) | 54.5Hz (measured, vendor Spinorama data) |
| DSP | Yes | Integrated crossover, phase alignment, EQ and protection |
| Bluetooth | No | No |
| Weight | 30.6 lbs / 13.9 kg | - |
| Crossover Frequency | - | 1.6kHz (manufacturer specified) |
Related Speaker Comparisons
Other pairings from the same speaker class worth checking:
- RCF KX 10-A vs Yamaha DXR10mkIII
- Yamaha DXR10mkIII vs Vue Audiotechnik A-10
- RCF ART 710-A MK5 vs RCF NX 910-A
- RCF KX 10-A vs Yamaha DXR10mkII
- KV2 Audio EX10 vs RCF ART 710-A MK5
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Yamaha DXR10mkII: $814.99 Amazon B&H Photo Video Guitar Center eBay
Pros: A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.35 ideal-subwoofer preference score with 67Hz measured extension, and Yamaha’s FIR-X processing and D-Contour compressor simplify setup.
Cons: It lacks app control or Bluetooth audio found on some newer competitors, and its measured preference sits mid-pack for this ranking.
Full Yamaha DXR10mkII review and specifications →
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Matte-finish ABS |
| Configuration | Active 2-way bass-reflex PA speaker |
| DSP | Yes |
| Dimensions | 19.8"H x 12"W x 12.2"D (502 x 305 x 310 mm) |
| Drivers | 10" woofer, 1.75" compression driver |
| Frequency Response | 56Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount |
| Weight | 30.6 lbs / 13.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
KV2 Audio EX10: $2,900.00 B&H Photo Video eBay
Pros: Medium-quality vendor data gives it a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this ranking. Its 3-inch-diaphragm compression driver and integrated DSP target vocal clarity and controlled throw.
Cons: At a roughly $2,900 asking price this specialist box is far less accessible than the mainstream leaders, and user controls are comparatively spare without an onboard mixer or app control.
Full KV2 Audio EX10 review and specifications →
| Amplifier Power | 500W continuous (450W LF + 50W HF, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Baltic birch plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Crossover Frequency | 1.6kHz (manufacturer specified) |
| DSP | Integrated crossover, phase alignment, EQ and protection |
| Dimensions | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) |
| Drivers | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 65Hz - 20kHz (-3dB, manufacturer specified) |
| Inputs | Balanced female XLR input; male XLR through output |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons