Short answer: the Wharfedale Super Linton. It ranks #24 of 130 bookshelf speakers by sound quality at $2699; the Perlisten A3m ranks #43 and costs $3000, so there is little reason to consider the other one.
What the Wharfedale Super Linton offers: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
What the Perlisten A3m offers: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Watch for: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Buy the Wharfedale Super Linton. It ranks higher for sound quality than the Perlisten A3m and costs less, so there is no real case for the other one.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Wharfedale Super Linton | Perlisten A3m | |
|---|---|---|
| Price | $2,699.00 per pair | $3,000 per pair |
| Ranked | #24 of 130 in Large Size Bookshelf Speakers | #43 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) | approximately 61Hz (measured, spinorama.org) |
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) | 26.6 x 11.0 x 13.8 in each |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) | 4 ohms nominal; 3 ohms minimum |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) | 87.4dB at 2.83V/1m |
| Weight | 43.7 lbs (19.8 kg) each | - |
| Woofer Cabinet | ported, rear | - |
| Spinorama Preference Score | 5.28 | 3.39 |
| Spinorama Preference Score with Perfect Sub | 7.12 | 6.42 |
| Enclosure | - | Sealed |
| Maximum SPL | - | 111.4dB peak at 1m (manufacturer specified) |
Related Speaker Comparisons
How Wharfedale Super Linton compares with other leading options:
- Wharfedale Super Linton vs Perlisten S4b
- Wharfedale Super Linton vs KEF Reference 1 Meta
- Wharfedale Super Linton vs GR-Research NX-Studio
- Wharfedale Super Linton vs AsciLab C6B
- Wharfedale Super Linton vs Audio First Cadentia 3
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay
Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
Full Wharfedale Super Linton review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.28 |
| Spinorama Preference Score with Perfect Sub | 7.12 |
| Weight | 43.7 lbs (19.8 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: 5 Reasons Wharfedale Super Linton is the Hidden Gem of Audio Equipment More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Super Linton Review
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Absolute Favorite Products of 2024 Revealed
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Super Linton vs Ascend Acoustics CMT-340 SE2
- Wharfedale Super Linton vs Arendal 1528 Monitor 8
- Wharfedale Super Linton vs MoFi SourcePoint 10
- Wharfedale Super Linton vs Radiant Acoustics Clarity 6.2
- Wharfedale Super Linton vs Dynaudio Heritage Special
- Wharfedale Super Linton vs AsciLab F6Bs
- Wharfedale Super Linton vs MoFi SourcePoint 8
- Wharfedale Super Linton vs Wharfedale Linton 85
- See all 51 comparisons
Perlisten A3m: $3,000 per pair Perlisten Dealer Network eBay
Pros: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Measured bass extension of 85.8Hz (-3dB).
Cons: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Full Perlisten A3m review and specifications →
| Bass Extension (-10dB) | approximately 61Hz (measured, spinorama.org) |
|---|---|
| Bass Extension (-3dB) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 26.6 x 11.0 x 13.8 in each |
| Drivers | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Enclosure | Sealed |
| Impedance | 4 ohms nominal; 3 ohms minimum |
| Maximum SPL | 111.4dB peak at 1m (manufacturer specified) |
| Sensitivity | 87.4dB at 2.83V/1m |
| Spinorama Preference Score | 3.39 |
| Spinorama Preference Score with Perfect Sub | 6.42 |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Perlisten A3m vs ELAC Debut 3.0 DB63
- Perlisten A3m vs Aalto Speakers Aalto 3 Passive
- Perlisten A3m vs Emotiva Airmotiv XB2
- Perlisten A3m vs Ascend Acoustics Sierra-2EX V2
- Perlisten A3m vs Philharmonic BMR (v1)
- Perlisten A3m vs Ascend Acoustics Sierra-LX
- Perlisten A3m vs Wharfedale Linton 85
- Perlisten A3m vs ELAC DBR62
- See all 44 comparisons