Short answer: the Soundcore Motion 300 for flexible stereo use, the Beosound A1 for quiet listening. The Motion 300 packs pretty deep bass for its pocket size and can run stereo facing you or omnidirectional lying down, but its treble is very rolled off without its EQ. The A1 has deeper bass than the A1 2nd gen, yet it is not stereo and shows pumping sound artifacts above 60% volume. The B&O Beosound A1 is discontinued; its replacement is the B&O Beosound A1 3rd gen.
Buy the Soundcore Motion 300. It is rated higher for sound quality, and the B&O Beosound A1 is discontinued, so it is only available used.
If battery life is a priority, the B&O Beosound A1 is rated for 24 hours versus 13 hours for the Soundcore Motion 300.
Looking for alternatives? See the complete Portable Bluetooth rankings.
Measured Differences
- Close enough not to matter: maximum output (101 dB vs 99 dB).
Prices on this page were last checked November 18, 2026 at 8:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| Soundcore Motion 300 | B&O Beosound A1 | |
|---|---|---|
| Price | $79.99 | $200 Discontinued |
| Ranked | #3 of 182 in Medium Size Portable Bluetooth Speakers | #10 of 182 in Medium Size Portable Bluetooth Speakers |
| App | Yes | Yes |
| Aux Input | No | Yes |
| Bass Extension (-10dB) | 50Hz | 50Hz |
| Battery Life | 13 hours (Manufacturer specified) | 24 hours (Manufacturer specified) |
| Bluetooth | Yes | Yes |
| Bluetooth Codecs | AAC, LDAC, SBC | SBC, AAC |
| Built-in Microphone | Yes | Yes |
| EQ | Yes (9 band with adjustable frequency) | Yes |
| IP Rating | IPX7 | IP67 |
| Bluetooth Latency | 216ms ldac, 200ms aac, 116ms sbc | - |
| Maximum SPL | 101dB (measured by Alan Ross Reviews) | 99dB (measured by Alan Ross Reviews) |
| Power Bank | No | No |
| Stereo | Yes | No |
| Omnidirectional | Pointing up | Pointing up |
| TWS | Yes | Yes |
| Weight | 1.7 lbs (772 g) | 1.3 lbs (589 g) |
| Bluetooth Version | 5.3 | 4.2 |
| Dimensions | 7.9” x 3.6” x 2” (200 x 92 x 50 mm) | 5.2”W x 5.2”D x 1.9”H (133 x 133 x 48 mm) |
| Drivers | 2x 50.8mm (2”) full-range drivers + 2x passive radiators | 15mm tweeter + 83mm mid/bass driver |
| Frequency Response | 65Hz - 40kHz (Manufacturer specified) | - |
| Power Input | USB-C | USB-C |
| Amplifier Power | 30W | 60W total (30W each driver) |
| Party Mode | Yes (PartyCast up to 100 speakers) | - |
| Digital Aux Input | No | Yes (USB-C) |
| Strap | - | Yes (built-in strap) |
Where the Ratings Come From
- Soundcore Motion 300: reviews by Joy & Oluv’Sone, Oluv and Alan Ross.
- B&O Beosound A1: reviews by Joy & Oluv’Sone, JOY‘s 🎧3D🔈Audio-Show and Oluv.
This comparison is generated from the ratings, specifications and measurements on each product’s own page, and it updates when that data changes. How we rank explains how each rating is decided.
Related Speaker Comparisons
More top alternatives to Soundcore Motion 300:
