Revel Performa M22 vs MoFi SourcePoint 8

Last updated: August 24, 2026

Short answer: the MoFi SourcePoint 8 for better sound quality, the Revel Performa M22 for the lower price. The MoFi SourcePoint 8 ranks #17 of 125 bookshelf speakers at $2200. The Revel Performa M22 ranks #92 at $600, $1600 cheaper.

What the Revel Performa M22 offers: Very flat frequency response from 200hz to 10khz. Distortion is well controlled through most of the range, with only a modest crossover-region bump around 2-4kHz. Watch for: 3dB bass boost around 100hz. On-axis response also droops below 150Hz and peaks above 4kHz, which the reviewer thought may sound a bit bright/light. Distortion rises substantially below 100Hz when driven hard.

What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.

Buy the Revel Performa M22 if the price matters more than sound quality. Buy the MoFi SourcePoint 8 if sound quality matters more than the price.

Revel Performa M22 vs MoFi SourcePoint 8

Specifications Side By Side

Revel Performa M22 MoFi SourcePoint 8
PriceAbout $600 used$2200
Ranked#92 of 125 in Large Size Bookshelf Speakers#17 of 125 in Large Size Bookshelf Speakers
Bass Extension (-10dB)40Hz (measured, Audio Science Review)43Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)58Hz (measured, Audio Science Review)52Hz (measured, Erin’s Audio Corner)
Impedance4 ohms8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin’s Audio Corner)
Sensitivity85dB86.3dB (measured, Erin’s Audio Corner)
Drivers25mm tweeter + 200mm woofer8" woofer, 1.25-inch soft-dome tweeter
Weight41.7 lbs / 18.9 kg28 lbs / 12.7 kg each
Dimensions14.5"H x 8.6"W x 11.9"D (368.3 x 219.1 x 301.6 mm)18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm)
Woofer Cabinetported, rearported, rear

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Revel Performa M22: About $600 used eBay

Revel Performa M22 ranking card

Pros: Very flat frequency response from 200hz to 10khz. Distortion is well controlled through most of the range, with only a modest crossover-region bump around 2-4kHz.

Cons: 3dB bass boost around 100hz. On-axis response also droops below 150Hz and peaks above 4kHz, which the reviewer thought may sound a bit bright/light. Distortion rises substantially below 100Hz when driven hard.

Bass Extension (-10dB)40Hz (measured, Audio Science Review)
Bass Extension (-3dB)58Hz (measured, Audio Science Review)
Dimensions14.5"H x 8.6"W x 11.9"D (368.3 x 219.1 x 301.6 mm)
Drivers25mm tweeter + 200mm woofer
Impedance4 ohms
Sensitivity85dB
Weight41.7 lbs / 18.9 kg
Woofer Cabinetported, rear

MoFi SourcePoint 8: $2200 Crutchfield eBay

MoFi SourcePoint 8 ranking card

Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m.

Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.

Bass Extension (-10dB)43Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)52Hz (measured, Erin's Audio Corner)
Dimensions18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm)
Drivers8" woofer, 1.25-inch soft-dome tweeter
Impedance8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner)
Sensitivity86.3dB (measured, Erin's Audio Corner)
Weight28 lbs / 12.7 kg each
Woofer Cabinetported, rear