Short answer: the Revel F206 for better sound quality, the Klipsch RP-5000F II for the lower price. The Revel F206 ranks #22 of 68 floorstanding speakers at $2000. The Klipsch RP-5000F II ranks #48 at $1199.98, $800.02 cheaper.
What the Revel F206 offers: CEA2034 spinorama shows a pretty even on-axis response. Predicted in-room response is excellent, with a smooth downward slope. Horizontal beamwidth of about ±65 degrees is wide, if a bit uneven. Distortion is very nice at 86dB SPL/1m, falling below the frequency range where human hearing is most sensitive, and stays excellent even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice suppression of port and woofer resonances. Really amazing value for the performance. Watch for: Some directivity error and a small peak around 4.5kHz show up alongside the directivity error around 3kHz. Vertical directivity means listening position needs to stay within the tweeter axis, though the reviewer notes there is some leeway. Minimum impedance dips to 3.3 ohms, calling for an amplifier comfortable with a demanding load.
What the Klipsch RP-5000F II offers: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity. Watch for: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Buy the Revel F206 if sound quality matters more than the price. Buy the Klipsch RP-5000F II if the price matters more than sound quality.
Specifications Side By Side
| Revel F206 | Klipsch RP-5000F II | |
|---|---|---|
| Price | $2000 used, Discontinued | $1199.98 |
| Ranked | #22 of 68 in Large Size Floorstanding Speakers | #48 of 68 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 34Hz (measured, Audio Science Review) | 41Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) | 55Hz (measured, Erin’s Audio Corner) |
| Dimensions | 40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm) | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Discontinued | Yes | - |
| Impedance | 4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review) | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) |
| Drivers | Dual 6.5" (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Sensitivity | 87dB (measured, Audio Science Review) | 90dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Weight | 57.3 lbs / 26 kg each | 38.6 lbs / 17.5 kg |
| Woofer Cabinet | ported, front | ported, rear |
| Frequency Response | - | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Crossover Frequency | - | 1900Hz |
| Output Power | - | 100W continuous, 400W peak |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- KEF Q11 Meta vs KLH Model Five
- JBL Studio 698 vs PSB Imagine T65
- Revel F208 vs Revel Concerta2 F35
- Revel F206 vs Polk Audio Reserve R700
- Revel F206 vs Q Acoustics 5040
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel F206: $2000 used, Discontinued eBay
Pros: CEA2034 spinorama shows a pretty even on-axis response. Predicted in-room response is excellent, with a smooth downward slope. Horizontal beamwidth of about ±65 degrees is wide, if a bit uneven. Distortion is very nice at 86dB SPL/1m, falling below the frequency range where human hearing is most sensitive, and stays excellent even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice suppression of port and woofer resonances. Really amazing value for the performance.
Cons: Some directivity error and a small peak around 4.5kHz show up alongside the directivity error around 3kHz. Vertical directivity means listening position needs to stay within the tweeter axis, though the reviewer notes there is some leeway. Minimum impedance dips to 3.3 ohms, calling for an amplifier comfortable with a demanding load. Discontinued.
Full Revel F206 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| Dimensions | 40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm) |
| Discontinued | Yes |
| Drivers | Dual 6.5" (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25" (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1" (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Impedance | 4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review) |
| Sensitivity | 87dB (measured, Audio Science Review) |
| Weight | 57.3 lbs / 26 kg each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Klipsch RP-5000F II: $1199.98 Amazon eBay
Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity.
Cons: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Full Klipsch RP-5000F II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1900Hz |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin's Audio Corner) |
| Output Power | 100W continuous, 400W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) |
| Weight | 38.6 lbs / 17.5 kg |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-5000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-5000F II vs KEF Q11 Meta
- Klipsch RP-5000F II vs Monolith THX-365T
- Klipsch RP-5000F II vs Klipsch RP-8000F II
- Klipsch RP-5000F II vs Klipsch Heresy IV
- Klipsch RP-5000F II vs Dynaudio Emit 30
- Klipsch RP-5000F II vs Polk Audio XT60
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- See all 26 comparisons