RCF NX 915-A vs RCF ART 735-A MK4

Last updated: September 7, 2026

Short answer: these RCF NX 915-A and RCF ART 735-A MK4 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.

Why choose the RCF NX 915-A. The plywood enclosure, FiRPHASE/Bass Motion Control processing and flexible rigging make it a sturdier systems alternative to the ART 715-A MK5, with a wide 100° x 60° pattern and 131dB claimed peak.

Why choose the RCF ART 735-A MK4. Its large 3-inch compression-driver voice coil, 132dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and bass reach. The 21.4kg enclosure remains manageable for a 15-inch box.

What to weigh before buying. The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 24.1kg it is notably heavier than the ART-series alternatives. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued and eclipsed by current 9-series and MK5 models.

Buy the RCF NX 915-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 735-A MK4 when its stated strengths are the better match for the room and the rest of the PA.

The RCF ART 735-A MK4 is not a sound-quality pick. It sits near the bottom of the 29 15-inch two-way powered pa speakers; there are better options higher up.

RCF NX 915-A vs RCF ART 735-A MK4

Specifications Side By Side

RCF NX 915-A RCF ART 735-A MK4
Price$1,541.00$888.00
Ranked#17 of 29 in 15-Inch Two-Way Powered PA Speakers#24 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, compression driver15" woofer, 1.4" compression driver with 3" voice coil
Frequency Response45Hz - 20kHz (manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.8"H x 16.5"W x 17.7"D (705 x 419.6 x 450.4 mm)27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Coverage100° x 60°100° x 60°
Maximum SPL131dB peak (manufacturer specified)132dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR outputXLR/jack combo input; XLR output
Amplifier Power2100W peak (1400W LF + 700W HF)1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Crossover Frequency1600Hz800Hz (manufacturer specified)
Cabinet MaterialPolyurea-coated plywoodPolypropylene composite
Rigging6 x M10 insertsTwo M10 fly points; pole mount
Bass Extension (-3dB)53Hz (measured, vendor Spinorama data)53Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes, FiRPHASE, EQ, limiting and protection
BluetoothNoNo
Weight53.1 lbs / 24.1 kg47.2 lbs / 21.4 kg

More useful head-to-heads from the same speaker class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 915-A: $1,541.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 915-A ranking card

Pros: The plywood enclosure, FiRPHASE/Bass Motion Control processing and flexible rigging make it a sturdier systems alternative to the ART 715-A MK5, with a wide 100° x 60° pattern and 131dB claimed peak.

Cons: The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 24.1kg it is notably heavier than the ART-series alternatives.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)53Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPolyurea-coated plywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency1600Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.7"D (705 x 419.6 x 450.4 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL131dB peak (manufacturer specified)
Rigging6 x M10 inserts
Weight53.1 lbs / 24.1 kg

RCF ART 735-A MK4: $888.00 B&H Photo Video Guitar Center eBay

RCF ART 735-A MK4 ranking card

Pros: Its large 3-inch compression-driver voice coil, 132dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and bass reach. The 21.4kg enclosure remains manageable for a 15-inch box.

Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued and eclipsed by current 9-series and MK5 models.

Amplifier Power1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Bass Extension (-3dB)53Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPolypropylene composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency800Hz (manufacturer specified)
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Drivers15" woofer, 1.4" compression driver with 3" voice coil
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/jack combo input; XLR output
Maximum SPL132dB peak (manufacturer specified)
RiggingTwo M10 fly points; pole mount
Weight47.2 lbs / 21.4 kg