Short answer: depends on whether you’re building a fixed system or grabbing the lightest box you can carry. These rank #13 and #14 out of 19 10-inch powered PA speakers, priced at $1349 and $348.49.
The NX 910-A is the sturdier systems box. Its plywood enclosure and FiRPHASE/Bass Motion Control processing make it a more robust alternative to RCF’s own ART-series speakers, with a wide 100° x 60° pattern and 130dB claimed peak. Its own cons note the truncated vendor measurement doesn’t yield a preference score, preventing a confident tonal comparison with scored leaders, and at 16.4kg it’s noticeably heavier than lighter alternatives.
The DBR10 is Yamaha’s most portable powered 10-inch. It carries the same DSP and amplification platform as the DXR and DZR series, with a built-in 2-channel mixer accepting XLR, 1/4-inch and RCA sources, all at a much lower price. Medium-quality vendor data shows a 3.95 ideal-subwoofer preference score, mid-pack for this ranking, and its own cons note a subwoofer partner matters for full-range material.
Buy the NX 910-A if you want plywood construction and RCF’s advanced DSP processing for a semi-permanent system.
Buy the DBR10 if you want the lowest-cost, most portable option with a built-in mixer and don’t need RCF’s systems-grade processing.
Specifications Side By Side
| RCF NX 910-A | Yamaha DBR10 | |
|---|---|---|
| Price | $1,349.00 | $348.49 |
| Ranked | #13 of 19 in 10-Inch Two-Way Powered PA Speakers | #14 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" woofer, compression driver | 10" woofer, 1" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 55Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 20.1"H x 11.6"W x 13.1"D (510 x 294.2 x 332.3 mm) | 19.4"H x 12.1"W x 11.4"D (493 x 308 x 289 mm) |
| Coverage | 100° x 60° | 90° x 60° |
| Maximum SPL | 130dB peak (manufacturer specified) | 129dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output | 2 x XLR/TRS combo and stereo RCA; XLR output |
| Amplifier Power | 2100W peak (1400W LF + 700W HF) | 700W dynamic / 325W continuous (500W LF + 200W HF dynamic) |
| Crossover Frequency | 1600Hz | - |
| Cabinet Material | Polyurea-coated plywood | Plastic |
| Rigging | 5 x M10 inserts | 2 x M8 points; 35mm pole mount |
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) | 69Hz (measured, vendor Spinorama data) |
| DSP | Yes, FiRPHASE and Bass Motion Control | Yes |
| Bluetooth | No | No |
| Weight | 36.2 lbs / 16.4 kg | 23.1 lbs / 10.5 kg |
Related Speaker Comparisons
Other pairings from the same speaker class worth checking:
- Vue Audiotechnik A-10 vs RCF ART 710-A MK5
- Yamaha DZR10 vs RCF HD 10-A MK5
- Yamaha DZR10 vs Martin Audio CDD10
- RCF ART 710-A MK5 vs RCF NX 910-A
- Yamaha DBR10 vs Yamaha DZR10
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF NX 910-A: $1,349.00 Amazon B&H Photo Video Guitar Center eBay
Pros: The plywood enclosure and FiRPHASE/Bass Motion Control processing make it a sturdier systems alternative to the ART 710-A MK5, with a wide 100° x 60° pattern and 130dB claimed peak.
Cons: The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 16.4kg it is heavier than the ART-series alternative.
Full RCF NX 910-A review and specifications →
| Amplifier Power | 2100W peak (1400W LF + 700W HF) |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polyurea-coated plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE and Bass Motion Control |
| Dimensions | 20.1"H x 11.6"W x 13.1"D (510 x 294.2 x 332.3 mm) |
| Drivers | 10" woofer, compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | 5 x M10 inserts |
| Weight | 36.2 lbs / 16.4 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DBR10: $348.49 Amazon B&H Photo Video Guitar Center eBay
Pros: Yamaha’s most portable 10-inch powered speaker carries the same DSP and amplification platform as the DXR and DZR series, with a built-in 2-channel mixer accepting XLR, 1/4-inch and RCA sources.
Cons: Medium-quality vendor data shows a 3.95 ideal-subwoofer preference score, mid-pack for this ranking, so a subwoofer partner matters for full-range material.
Full Yamaha DBR10 review and specifications →
| Amplifier Power | 700W dynamic / 325W continuous (500W LF + 200W HF dynamic) |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Plastic |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| DSP | Yes |
| Dimensions | 19.4"H x 12.1"W x 11.4"D (493 x 308 x 289 mm) |
| Drivers | 10" woofer, 1" compression driver |
| Frequency Response | 55Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | 2 x XLR/TRS combo and stereo RCA; XLR output |
| Maximum SPL | 129dB peak (manufacturer specified) |
| Rigging | 2 x M8 points; 35mm pole mount |
| Weight | 23.1 lbs / 10.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons